[1] Thread 1 started
[1] entered netcam_start()
[1] Camera thread starting...
[1] netcam_start: Netcam_http parameter '1.1' converts to flags: HTTP1.0:0 HTTP1
[1] netcam_start: now calling netcam_setup_html()
[1] netcam_setup_html: Netcam has flags: HTTP1.0: 0 HTTP1.1: 1 Keep-Alive ON.
[1] Camera connect string is ''GET /nphMotionJpeg?Resolution=320x240&Quality=Sta
Host: bl-c101
User-Agent: Motion-netcam/3.2.12
Connection: Keep-Alive

''
[1] End of camera connect string.
[1] netcam_setup_html: about to try to connect, time #0
[1] netcam_connect with keepalive set, invalid socket.This could be first time, 
[1] netcam_connect: SO_KEEPALIVE is OFF
[1] netcam_connect: SO_KEEPALIVE set on socket.
[1] Received first header ('HTTP/1.0 200 OK')
[1] Received first header ('Content-type: multipart/x-mixed-replace; boundary=--
[1] Streaming camera
[1] Boundary string [--myboundary]
[1] Received first header ('')
[1] Found image header record
[1] netcam_setup_html: connected, going on to read image.
[1] expanding buffer from 0 to 4096 bytes
[1] netcam_get_dimensions: JFIF_marker IS PRESENT ret 0
[1] netcam image height (120) is not modulo 16
[1] Could not fetch initial image from camera
[1] Motion continues using width and height from config file(s)
[1] Resizing pre_capture buffer to 1 items
[1] Started stream webcam server in port 8081
[1] Retrying until successful connection with camera
[1] entered netcam_start()