50 recent changes in Motion Web retrieved at 14:30 (GMT)
SupportQuestion2007x12x14x212026
Question could you add an option to log motion logs to a file rather than to syslog? sometimes it produces tons of output and i don't like it if my syslog file ge...
r2 - 01 Jan 2008 - 22:54 by AngelCarpintero
SupportQuestion2007x12x23x141050
Question I have seen a couple of posts regarding quicktime being unable to view videos saved by motion. Timelapse videos work fine, however all others fail. Usi...
r2 - 01 Jan 2008 - 22:52 by AngelCarpintero
SupportQuestion2007x04x04x145613
Question Hi I have a link problem on CentOS4. Motion object files compiled. Linking Motion... gcc L/usr/local/lib o motion motion.o conf.o draw.o video.o netc...
r3 - 01 Jan 2008 - 22:17 by AngelCarpintero
FeatureRequest2007x02x08x172812
Feature Request: Description When fetching Jpeg images from a network IP camera ( from a non streaming / non MJPEG source ), the motion netcam code does a TCP ...
r3 - 29 Dec 2007 - 16:19 by AngelCarpintero
BugReport2007x11x17x171735
BUG: When I visit action/restart or action/quit through the control interface, motion hangs and both the webcam and the control interface stop responding. I have...
r4 - 11 Dec 2007 - 09:19 by AngelCarpintero
FeatureRequest2007x12x03x135328
Feature Request: Description As far as I understand labeling (marking movement in all pixels of the same colour in the neighbourhood of changed pixel?) it seems...
r2 - 03 Dec 2007 - 21:37 by JoergWeber
BugReport2007x11x28x151359
BUG: I used the latest svn from ffmpeg, configured it with "./configure" (and make, make install) and got the daily snap of motion (20071128 051001). I then conf...
r2 - 02 Dec 2007 - 20:54 by AngelCarpintero
SupportQuestion2007x11x11x085048
Question I have a safer ccd camera which provides infra led lighting at night, which does not produce a good pic with motion downloaded as an rpm via this site. A...
r5 - 02 Dec 2007 - 18:43 by AngelCarpintero
BugReport2007x11x28x205443
BUG: When running motion using /etc/init.d/motion start the "on_movie_end" does not appear to be working. when running motion via command line as motion s n or...
r4 - 02 Dec 2007 - 18:40 by AngelCarpintero
SupportQuestion2007x11x27x093818
Question I would like to use with Motion MySql. Motion works perfectly, but I need to put the records on a Mysql Database outside. Using the commands in webcam1....
r2 - 02 Dec 2007 - 18:34 by AngelCarpintero
SignalsKill
Signals (sent with e.g. kill command) A signal can be sent from the command line by typing e.g. kill s SIGHUP pid, where the last parameter is the process ID whi...
r6 - 29 Nov 2007 - 07:57 by FanTomas
FeatureRequest2007x11x25x064501
Feature Request: Description The HTML output on motion control isn't valid HTML to some extent. Sample: Thread 1 text_left = Kamera 1 help The li Element...
r2 - 25 Nov 2007 - 10:31 by KennethLavrsen
FeatureRequest2006x05x09x150917
Feature Request: Description Is it possible to generate a 4x4, 6x6, 8x8 split image using all camera threads and put this in to one additional mjpeg stream? Thi...
r3 - 24 Nov 2007 - 20:19 by AxelAmthor
SupportQuestion2007x11x20x085735
Question Great software! I have a 2 camera setup, thread1 controls an old handheld video camera connected to a pc via a Hauppage TV card input thread2 a USB log...
r3 - 22 Nov 2007 - 13:11 by AndrewCook
MjpegColorIssue
Mjpeg (V4L2_PIX_FMT_MJPEG) Description of Patch Replacement for current implentation of V4L2_PIX_FMT_MJPEG palette for webcams (uvcvideo tested) to fix color is...
r5 - 19 Nov 2007 - 02:33 by AngelCarpintero
MjpegToYUV420pPatch
mjpegtoyuv420p patch for Logitech Quickcam Pro Description of Patch Posted by Main.KennethLavrsen from posting on MailingList Hi To use my Logitech Quickcam Pro ...
r9 - 19 Nov 2007 - 02:33 by AngelCarpintero
BugReport2007x05x23x145436
BUG: Compilation on SUSE 10.1 with last ffmpeg or ffmpeg cvs 20060306 exit with errors ******************** * Configure status * **************...
r4 - 19 Nov 2007 - 01:54 by AngelCarpintero
FeatureRequest2005x03x31x224850
Feature Request: Description A lot of new cheap webcams output their images in Bayer format. According to the driver writers it is not the job of the driver to...
r4 - 19 Nov 2007 - 01:14 by AngelCarpintero
FeatureRequest2006x11x09x050638
Feature Request: Description Add the connection status of devices. This feature is mainly useful for network devices , so you can get the connection status of ...
r4 - 19 Nov 2007 - 01:13 by AngelCarpintero
SupportQuestion2007x11x15x151829
Question Hi, after many attempts have finally managed to install FFmpeg (ffmpeg 0.4.9 pre1 with ./Configure enable shared, make, make install). In /usr/local/l...
r2 - 16 Nov 2007 - 11:47 by JoergWeber
UsingDatabases
Using Databases Motion can be compiled with both MySQL and PostgreSQL database support. When enabled Motion adds a record to a table in the database as specifie...
r5 - 14 Nov 2007 - 22:32 by KennethLavrsen
SanityCheckforConfigOptions
Sanity Check for Config Options Description of Patch Next milestone on the roadmap will be a better handling of config options. A sanity check has to be performe...
r5 - 11 Nov 2007 - 09:43 by JoergWeber
BugReport2007x11x05x231058
BUG: Hi, thanks for great program! I have Mustek WCam300 (lsusb gives: "Bus 1 Device 3: ID 06a5:d001 Divio ProLink DS3303u WebCam") I use "nw8xx.ko" module (...
r3 - 10 Nov 2007 - 07:09 by AngelCarpintero
FeatureRequest2007x07x03x061451
Feature Request: Description Sorry if already discussed, but I couldnt find any reference. Many a times I dont want to check the whole area for motion, only spe...
r6 - 05 Nov 2007 - 11:20 by JoergWeber
MotionWithMythTV
MotionWithMythTV Introduction MythTV is a Linux open source project to provide PVR (personal video recorder) features on a computer. MythTV servers are usually o...
r11 - 02 Nov 2007 - 11:41 by SimonW
FeatureRequest2007x10x31x164251
Feature Request: Description Hello, I use motion as MJPEG streaming software and find it useful. The output is playable on vlc player. I find ways to start Moti...
NEW - 31 Oct 2007 - 17:06 by JpkaJ
FeatureRequest2005x05x03x020916
Feature Request: Description client could get stream (webcam server) as MPEG instead of MJPEG Main.RobertoSpadim 03 May 2005 Follow up Yep. Would be nice. ...
r8 - 29 Oct 2007 - 15:34 by RomanGaufman
SupportQuestion2007x10x23x183238
Question I have a Logitech Communicate camera. When I load the driver qcset i says: Depth : 24 Palette : RGB888 packed into 24bit words. When I st...
r5 - 27 Oct 2007 - 02:49 by GuardianBob
FeatureRequest2007x10x25x065125
Feature Request: Description I have a web camera which is connected via Homeplug Ethernet over mains, which reduces the amount of wiring which has to be run to...
NEW - 25 Oct 2007 - 06:57 by JohnLines
FFmpegSWFcreation
ffmpeg_video_codec to swf to create flash files from ffmpeg Description of Patch This patch was written by B #65533;ser Pete from the mailing list, however I fou...
r5 - 20 Oct 2007 - 04:56 by AngelCarpintero
FeatureRequest2007x08x20x044016
Feature Request: Description If there isn't a way already, I think there should be an option where motion can change the user id that it runs under. Similar to ...
r4 - 12 Oct 2007 - 14:05 by AngelCarpintero
SupportQuestion2007x10x11x162240
Question I have multiple ip cameras running through motion. The problem is that I need them to start detecting motion at different times of the night. As the co...
r2 - 11 Oct 2007 - 20:50 by KennethLavrsen
MotionNotificationsViaYourNabaztagBunny
Let your bunny warn you when motion is detected. Introduction The nabaztag is a wifi enabled rabbit with lights and ears that can move. It also has a speechgener...
NEW - 10 Oct 2007 - 08:05 by FolkertvanHeusden
SmarterReferenceFrameDiscussion
Smarter Reference Frame Discussion Todays reference frame is a decay type reference frame which is made to ensure detection of slowly moving objects. This has a n...
r13 - 04 Oct 2007 - 20:53 by JoergWeber
FeatureRequest2007x04x12x232027
Feature Request: Description in some installations it would be useful to have the sensitivity Mask disabled during motion events. eg: if i set up a camera in...
r5 - 04 Oct 2007 - 02:16 by LeRoy
FeatureRequest2006x07x06x213319
Feature Request: Description We use the snapshot feature as a backup for the motion detect feature. For this purpose, we put the snapshot interval to 1 sec. We ...
r3 - 30 Sep 2007 - 14:42 by KennethLavrsen
FeatureRequest2007x01x19x182142
Feature Request: Description I have a camera observing a street, but I would like to be able to distinguish movies of people from those of passing cars in the...
r5 - 30 Sep 2007 - 10:25 by JoergWeber
FeatureRequest2006x01x01x040730
Feature Request: Description I am trying to use it to watch the entire front yard. The typical event begins with very small objects (people or cars) entering ...
r3 - 30 Sep 2007 - 10:06 by JoergWeber
AlgDiffStandardMmxPatch
alg_diff_standard MMX patch Introduction This patch contains MMX assembler addition to the alg_diff_standard function. The benefit is a major speed improvement, ...
r11 - 30 Sep 2007 - 08:19 by KennethLavrsen
BugReport2007x09x18x184851
BUG: i use the "sql_query" option. In normal mode its running and motion write to mysql, but if i used "daemon on" its written in syslog mysql error occured. On ...
r5 - 25 Sep 2007 - 19:57 by AngelCarpintero
LogPreview
Log preview image as different type as jpeg Description of Patch I had a problem when I wanted to save all motion pictures and still have a event preview picture...
NEW - 11 Sep 2007 - 19:58 by DagErlandsson
FTPAtIntervalWhenUpdatedScript
Bash script to FTP images to a remote server when the file has been updated Introduction Motion is great, but it doesn't have any built in FTP functionality. In ...
NEW - 01 Sep 2007 - 21:28 by StephTheGeek
BugReport2007x08x30x103958
BUG: i get an compile error with ffmpeg after "make" Linking Motion... i tracked down the problem to the Makefile line 37: "LIBS = lm lpthread ljpeg L/usr...
r4 - 31 Aug 2007 - 21:23 by AngelCarpintero
SupportQuestion2007x08x22x144132
Question Hello, i have set up 2 Trendnet TV IP201W and 1 Abus Security Center DIGILAN TV7230. The work normaly with the browser if i put in the several ip s off t...
r2 - 30 Aug 2007 - 14:37 by AngelCarpintero
CamUniversal
Program to manage and record several cameras (Ip Cams, Webcam) Main.FlorianSchropp 23 Aug 2007
NEW - 23 Aug 2007 - 06:48 by FlorianSchropp
SupportQuestion2007x07x29x084400
Question I installed motion motion_3.2.8 0.ubuntu.feisty_i386.deb and tried to start it then, it says (among other things) ioctl(VIDIOCGMBUF) Error device does ...
r11 - 15 Aug 2007 - 03:12 by JasjeetSingh
SupportQuestion2007x08x06x142825
Question Ask your question. If you want to paste error output text or similar text where new lines must be preserved, paste it in the field below. Hello, I'm sorr...
r2 - 09 Aug 2007 - 03:50 by AngelCarpintero
LinuxUvcTrackingPatch
Patch for support Motion tracking feature with linux uvc devices Description of Patch To enable tracking for Logitech Quickcam Sphere (046d:08c2) which use linux...
r28 - 09 Aug 2007 - 03:11 by AngelCarpintero
FeatureRequest2007x07x08x091911
Feature Request: Description MJPEG is a better codec for security cameras especially when you need to step though them frame by frame. Since ffmpeg already supp...
r3 - 02 Aug 2007 - 13:08 by SimonW
SupportQuestion2007x05x16x032451
Question Motion is not capturing images. First required to start motion, than tv time, to initialize the capture board I think. Than motion, works ok. Using moti...
r8 - 01 Aug 2007 - 18:24 by AngelCarpintero
Number of topics: 50
< Previous Page 27 of 41 Next >
See also:
RSS feed, recent changes with 50, 100, 200, 500, 1000 topics, all changesCopyright © 1999-2025 by the contributing authors.
All material on this collaboration platform is the property of the contributing authors.
Please do not email Kenneth for support questions (read why). Use the Support Requests page or join the Mailing List.
This website only use harmless session cookies. See Cookie Policy for details. By using this website you accept the use of these cookies.
Please do not email Kenneth for support questions (read why). Use the Support Requests page or join the Mailing List.
This website only use harmless session cookies. See Cookie Policy for details. By using this website you accept the use of these cookies.