Motion - Web Changes

You are here: Foswiki>Motion Web>WebChanges (27 Oct 2010, KennethLavrsen)Edit Attach

50 recent changes in Motion Web retrieved at 06:31 (GMT)

SupportQuestion2009x01x11x213342

Question Motion does not start in conjunction with dv4l, showing errors, se below. Using other applications through /dev/video1, the images are: camorama: ok (but...

r3 - 09 Aug 2009 - 20:28 by AngelCarpintero

SupportQuestion2008x11x18x145843

Do not edit title above. Edit the TopicTitle field in the form at the bottom Question I get a Segmentation Fault wenn I try to use that Camera. munin.conf: vi...

r3 - 09 Aug 2009 - 20:25 by AngelCarpintero

FeatureRequest2009x08x08x140847

Feature Request: Description It would be nice to have a threshold so that motion frames are not detected if pixel difference (for changed pixels) is below that...

r2 - 09 Aug 2009 - 17:16 by AngelCarpintero

SupportQuestion2009x08x02x202456

Question When I first built the vloopback module, and modprobed it, I used it successfully for several hours. However, upon rebooting my machine, I can still load...

r4 - 08 Aug 2009 - 23:01 by AngelCarpintero

SupportQuestion2009x07x23x193504

Question I'm trying to get a Genius Eye 312 webcam running so far without success. I've got the webcam loading up I think and appearing as /dev/video0. Whe...

r2 - 06 Aug 2009 - 01:36 by AngelCarpintero

SupportQuestion2008x10x20x200544

Question This is a phillips laptop usb camera with lamp, but not detected as pwc. motion r432 can't get a palette, and no output occurs. kernel 2.6.27 64 bit 0 ...

r5 - 06 Aug 2009 - 00:51 by AngelCarpintero

SupportQuestion2008x08x14x014531

Question I am trying to use dv4l vloopback motion to capture images off my DV camcorder via firewire (ieee1394). Everything works, but Motion segfaults after ...

r3 - 06 Aug 2009 - 00:49 by AngelCarpintero

SupportQuestion2008x11x15x193529

Question I want to try Motion. But my actual version of ffmpeg is 0.4.9.15793svn 20081108.pm.1300 on opensuse 11. I have tried to complie source code of 0.4.8 ver...

r3 - 06 Aug 2009 - 00:38 by AngelCarpintero

SupportQuestion2009x06x29x184409

Question Thanks Florin: When you say "Pick a different video source", do you mean try a different camera, or try a different port on the Capture Card? Also, I do...

r6 - 05 Aug 2009 - 19:51 by AngelCarpintero

SupportQuestion2009x05x01x150546

Question Hello, I have a Ubuntu 8.10 server running at home, and would like to include 2 same webcams. The setting of 2 devices with Motion presents no problem. H...

r2 - 05 Aug 2009 - 19:49 by AngelCarpintero

SupportQuestion2009x05x01x122434

Question I am a complete beginner when it comes to all this stuff so pleas bear with me. I currently have Ubuntu 9.04 installed, and I have also installed Motion...

r3 - 05 Aug 2009 - 19:47 by AngelCarpintero

SupportQuestion2009x01x16x023720

Question Hi I was thinking of using Ubuntu Server version for my motion machine. The specs for the server edition say that preemption is turned off. Does this mak...

r2 - 05 Aug 2009 - 19:41 by AngelCarpintero

SupportQuestion2009x08x04x191406

Question I have two cameras "Sirius USB2.0 Camera" and don't work together, when I run 'Motion' only works once, and the other I get a gray image. I compile the l...

r9 - 05 Aug 2009 - 18:35 by AngelCarpintero

FreeNodeIRC

IRC on Freenode Some of the hardcore Motion users and developers are often available on IRC (Internet Relay Chat). You are welcome to pass by for a short questio...

r11 - 05 Aug 2009 - 17:34 by AngelCarpintero

SupportQuestion2008x07x14x124819

Question Hello, I am using motion with a Logitech Quickcam Pro 9000. Everything was fine, so I decided to add a new webcam, and bought the same as the first. I co...

r6 - 05 Aug 2009 - 16:36 by AngelCarpintero

SupportQuestion2009x07x29x123941

Question Hi I have motion installed and working with a USB camera. But now i want to connect to an IP camera. The Config file motion.conf is confusing. In the beg...

r3 - 03 Aug 2009 - 20:49 by AngelCarpintero

FeatureRequest2009x07x23x183122

Feature Request: Description Hi, thanks for the very useful (and funny) software. Would it be possible to specify coordinates instead of just pre defined areas...

r3 - 25 Jul 2009 - 07:47 by AngelCarpintero

BugReport2009x06x13x231747

BUG: Within the distribution example of the config file are several values, that are set to something other than the values described as "default". For example: ...

r3 - 25 Jul 2009 - 07:37 by AngelCarpintero

MotionRearchitectureDiscussion

Motion Rearchitecture Discussion Introduction The issue has been raised about rearchitecturing Motion. As Kenneth points out in the RoadMap, this is not very urg...

r14 - 25 Jul 2009 - 07:22 by AngelCarpintero

BugReport2009x07x23x150416

BUG: Hi This might be a duplicate of other bug reports, not really sure, if so just mark this duplicate. I got from a nice working setup on motion v.3.2.8 with n...

r5 - 24 Jul 2009 - 10:50 by TheOtherBug

HowtoMotionPwcFreeBSD

Howto use Motion with pwc port in FreeBSD Get the pwc port cd /usr/ports/multimedia/pwcbsd/ make install kldload pwc ( now plug your webcam, if it's plugged the...

r16 - 21 Jul 2009 - 20:34 by AngelCarpintero

FeatureRequest2009x07x20x100425

Feature Request: Description I'm missing an easy way to get current values of the settings. In the earlyer versions I could do a query and simply strip the htm...

r3 - 20 Jul 2009 - 20:58 by TheOtherBug

BugReport2009x06x24x230604

BUG: Just made a upgrade from v.3.2.8 to v.3.2.10.1 / 3.2.11 i found out all the help text you have putting in the control interface has broken a lot things her...

r6 - 20 Jul 2009 - 10:43 by AngelCarpintero

FeatureRequest2009x07x19x034851

Feature Request: Description when only http streaming is used and there are no active clients, it is wasteful to keep grabbing images, even at 2 per second ev...

NEW - 19 Jul 2009 - 04:04 by DeomidRyabkov

BugReport2009x07x15x111821

BUG: segfault at 0 ip b73c4d09 sp b616bdf8 error 4 in libc 2.6.1.so fix: in void motion_log(int level, int errno_flag, const char *fmt, ...) #if (defined(BSD)) ...

r3 - 18 Jul 2009 - 00:41 by AngelCarpintero

BugReport2009x06x18x142620

BUG: I'm using: Linux 2.6.29.4 167.fc11.i586 #1 SMP Wed May 27 17:14:37 EDT 2009 i686 i686 i386 GNU/Linux Fedora Core 11 (Leonidas) Name : motion Arch : i586 Ver...

r5 - 16 Jul 2009 - 18:57 by AngelCarpintero

SmarterReferenceFramePatch

A smarter Reference Frame Description of Patch As dicussed a while ago, Motion needs a redesign of the reference frame implementation in order to properly be abl...

r11 - 15 Jul 2009 - 21:20 by FlorinAnton

SupportQuestion2009x07x10x173859

Question First of all let me say thanks to this very powerfull program and all the time you've probably spent to realise it ! I'am not sure if it is a bug and b...

r8 - 12 Jul 2009 - 22:29 by AngelCarpintero

SupportQuestion2009x04x30x053208

Question I installed 9.04 on a desktop (clean install on a different Hard Drive) that had been running motion quite nicely. The webcam worked and I had it set up ...

r3 - 12 Jul 2009 - 09:56 by AngelCarpintero

ReleaseNoteMotion3x2x11

Motion Release Release Notes Motion release 21 Sep 2008 Summary of changes since 3.2.10.1 Features * Added support for ffmpeg 2008 04 09 port version of...

r6 - 12 Jul 2009 - 05:52 by AngelCarpintero

SupportQuestion2009x07x11x185107

Question I just setup motion on a new Ubuntu install. When I goto the webcam port with Firefox I only get the ghost image or the difference from the last frame. W...

r3 - 11 Jul 2009 - 21:55 by AngelCarpintero

BugReport2009x04x25x020128

BUG: When starting normally, Motion fails to open the camera because it can't find a valid palette format. If you use LD_PRELOAD to load v4l2convert.so when runn...

r2 - 09 Jul 2009 - 09:19 by AngelCarpintero

SupportQuestion2009x04x12x141907

Question When I start motion executable , how can I list to stdout only the current config options that it is read from configuration file motion.conf ???... I ha...

r3 - 09 Jul 2009 - 09:00 by AngelCarpintero

SupportQuestion2009x04x16x092113

Question Using Motion 3.2.10.1 on OpenWRT KAMIKAZE (8.09, r14511) (Linux OpenWrt 2.6.25.17) with USV driver and Logitech Quickcam Sphere AF I get "Error capturing...

r2 - 09 Jul 2009 - 08:59 by AngelCarpintero

SupportQuestion2009x04x13x194312

Question Hi, 1001 thanks for a good product, it works wonderful on my nslu2/debian5/Logitech quickcam E3500. You have the option "control_authentication" for the...

r2 - 09 Jul 2009 - 08:57 by AngelCarpintero

BugReport2009x03x29x202528

BUG: when i have options: framerate 15 ffmpeg_video_codec mpeg4 I get correct movie file my.avi with FPS=15 when I try to use: ffmpeg_video_codec flv i'll get mo...

r3 - 09 Jul 2009 - 08:47 by AngelCarpintero

BugReport2009x03x28x144231

BUG: Hi, I'm using area_detect to have motion events only from predefined areas. Suppose I set area_detect to 123. If a motion is detected in area 4 an event is ...

r2 - 09 Jul 2009 - 08:38 by AngelCarpintero

SupportQuestion2009x03x19x222302

Question When I connect my webcam by a USB 1.1 port to my notebook and start motion, I get the message, that only the palette MJPG (MJPEG) is supported. When I co...

r2 - 09 Jul 2009 - 08:27 by AngelCarpintero

SupportQuestion2009x05x13x160223

Question ok im, having to be quick as im off to work 5 minutes ago how do i get it to email the pictures that motion saves to my email address? im guessing i woul...

r5 - 09 Jul 2009 - 07:56 by AngelCarpintero

SupportQuestion2009x06x19x005116

Question how to find Motion when installed through synaptic manager? Hello sorry to bother u, i am fairly new to linux and am trying my darnest to install moti...

r3 - 09 Jul 2009 - 07:55 by AngelCarpintero

SupportQuestion2009x06x13x161505

Question When I try to start motion with a custom config file, I always get the following output. The webcam is a Sepia model, lsusb identifies it as "ID 093a:260...

r3 - 09 Jul 2009 - 07:46 by AngelCarpintero

SupportQuestion2009x05x28x183617

Question Hi. Motion is great. I am using latest version on Ubuntu 9.04 with two identical Logitech Notebook Deluxe USB webcams. They're a few years old and are US...

r5 - 09 Jul 2009 - 07:42 by AngelCarpintero

FeatureRequest2006x04x08x061905

Feature Request: Description I think it would be nice with a handler to external commands on errors, that could be used to send a mail, call thru asterisk or w...

r5 - 08 Jul 2009 - 08:13 by AngelCarpintero

FeatureRequest2009x05x30x214239

Feature Request: Description The location I've got my camera in results in some dead space at the top of the frame. This would be an ideal place to put the dat...

r3 - 08 Jul 2009 - 07:57 by AngelCarpintero

SupportQuestion2009x05x21x074601

Question Hi, Last night, my webcam stopped recording; everything was working well. If I have a look via port 8081 I see a grey image with the text "Unable to open...

r3 - 08 Jul 2009 - 07:54 by AngelCarpintero

SupportQuestion2009x05x26x191824

Question 2 webcams on same webpage possible? I have two webcams, one logitek quickcam pro 9000 and one rocketfish 2mp wich both work really well! I would like to ...

r3 - 08 Jul 2009 - 07:53 by AngelCarpintero

SupportQuestion2009x05x18x133556

Question Motion stuck in the 352x288 resolution. Even if I set higher resolutions, it starts with this one. thread.conf: (...) # Image width (pixels). Valid range...

r2 - 08 Jul 2009 - 07:52 by AngelCarpintero

SupportQuestion2009x06x29x002334

Question I am a total beginner. I installed it but I don't know where. Where do I go from here? The guide does not help any. How do I get the commands to work? Ho...

r5 - 08 Jul 2009 - 07:41 by AngelCarpintero

SupportQuestion2009x05x17x000024

Question Hi, I'm attempting to get motion working on Debian 5.0.2 with a Hauppauge ImpactVCB capture card. I get the following error messages (full output appears...

r5 - 08 Jul 2009 - 07:37 by AngelCarpintero

SupportQuestion2009x05x10x165040

Question I am running motion on ubuntu 8.10 Linux and using Logitech QuickCam (640x480) USB Camera. Also using motion with default motion.conf settings. Motion ap...

r3 - 08 Jul 2009 - 07:31 by AngelCarpintero

Number of topics: 50

< Previous Page 21 of 41 Next >

See also:

RSS feed, recent changes with 50, 100, 200, 500, 1000 topics, all changes

Topic revision: r2 - 27 Oct 2010, KennethLavrsen

Motion

Welcome

Motion Web
Motion Home

Copyright © 1999-2025 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Please do not email Kenneth for support questions (read why). Use the Support Requests page or join the Mailing List.
This website only use harmless session cookies. See Cookie Policy for details. By using this website you accept the use of these cookies.