50 recent changes in Motion Web retrieved at 09:07 (GMT)
BugReport2008x01x27x155414
BUG: d link dcs 900 connection lost after a short time. Everything works just fine then: exitus (s below). I read about the bug, but not about any solution. Is...
r7 - 18 May 2008 - 23:35 by AngelCarpintero
BugReport2007x10x23x093651
BUG: Compiling motion with mjpegtools support breaks motion compilation for AMD64. ******************** * Configure status * ******************** OS...
r3 - 18 May 2008 - 23:34 by AngelCarpintero
BugReport2007x06x27x163751
BUG: I've had problems with motion getting 'stuck' if the mysql server dies or gets restarted. My expectation is that motion would try to reconnect to it. What i...
r6 - 18 May 2008 - 23:34 by AngelCarpintero
BugReport2007x07x07x182605
BUG: Have one card with 4chips and 16 inputs (SAA7134) and noticed that chips that only used 2 inputs needed more skip frames than chips used 4 inputs. Trying a ...
r7 - 18 May 2008 - 23:33 by AngelCarpintero
BugReport2007x07x11x211429
BUG: My camera claims to support 640x480, but it is downsized to 176x144 It's a QuickCam Pro5000. I'm using V4l v2, and the uvcvideo driver. works great, just to...
r7 - 18 May 2008 - 23:33 by AngelCarpintero
BugReport2007x10x27x150419
BUG: Hello. I use a motion more than one year. All works excellently on a computer with 32 bit operational system FreeBSD 6.2. Now I wish to force to work a moti...
r6 - 18 May 2008 - 23:32 by AngelCarpintero
BugReport2008x01x21x043812
When choosing a palette I had the problem that the selected palette wasn't chosen, but instead a 'higher' supported palette. My camera supports V4L2 _PIX_FMT_MJPE...
r3 - 18 May 2008 - 23:30 by AngelCarpintero
BugReport2007x11x26x010755
BUG: vid_tuner struct is not initialized in v4l_set_input which leads to random problems on some cards using the tuner. (see patch included) video.c.dist ...
r4 - 18 May 2008 - 23:30 by AngelCarpintero
BugReport2007x11x28x093122
BUG: It seems the httpd remote control is falling apart. Since SVN 253 I have not been able to use the remote control interface with user name and password. And ...
r3 - 18 May 2008 - 23:29 by AngelCarpintero
BugReport2007x11x25x102808
BUG: The HTML output on motion control isn't valid HTML to some extent. Sample: Thread 1 text_left = Kamera 1 help The Element is only valid within an El...
r3 - 18 May 2008 - 23:29 by AngelCarpintero
BugReport2007x10x05x220640
BUG: Motion build exists with error when ffmpeg.c is compiled. Even latest motion snapshot has this problem. Is my version of ffmpeg too new? For info my ffmpeg ...
r4 - 18 May 2008 - 23:29 by AngelCarpintero
BugReport2007x09x22x180244
BUG: I am somewhat of a newbie but I think there is a problem with %f. I tried the command "on_movie_end echo %f" and I got this: %f /var/lib/motion/snapshots/03...
r3 - 18 May 2008 - 23:28 by AngelCarpintero
BugReport2008x02x25x013419
BUG: Describe the bug in plain text here. Paste in error messages and other text where new lines must be preserved in the field below angel and i found that when...
r3 - 18 May 2008 - 23:27 by AngelCarpintero
FeatureRequest2008x05x15x160542
Feature Request: Description It would be great if a motion jpeg can be outputted for first, best or center like for output_normal. Main.RomanGaufman 15 May...
NEW - 15 May 2008 - 16:12 by RomanGaufman
SupportQuestion2007x04x03x000305
Question Hello everyone, i got a new Logitech QuickCam Sphere MP and after hours of compiling and testing i finally got some pictures. But only at a size of 176x1...
r3 - 10 May 2008 - 23:35 by AngelCarpintero
SupportQuestion2006x01x27x123418
Question Hello! I ran into problems getting motion running on my freebsd box... i read through wiki and faq and would be very pleased if someone could give me som...
r3 - 10 May 2008 - 23:33 by AngelCarpintero
BugReport2006x09x04x155737
BUG: floating point error Motion is dead after some changes of width and height parameters by my PHP application. Now server can't restart, there is a floating p...
r4 - 10 May 2008 - 23:13 by AngelCarpintero
SupportQuestion2006x09x12x083959
Question I have a Logitech Quickam Express with driver spca5xx, because the pwc driver is not commpatible (I think). The webcam works correctly with camorama and ...
r4 - 07 May 2008 - 04:44 by AngelCarpintero
SupportQuestion2007x01x02x093247
Question Hi, first, i want to use this message to say a big THANKS for such a great solution to detect motion and store it. Never used a programm that can do so m...
r3 - 07 May 2008 - 04:43 by AngelCarpintero
SupportQuestion2007x01x11x193352
Question Hi I finally got Motion working, and have started capturing images from my Logitech QuickCam Pro 5000 (which I think uses v4l2). This webcam features "Ri...
r3 - 07 May 2008 - 04:42 by AngelCarpintero
SupportQuestion2007x02x02x110629
Question gentoo linux kernel 2.6.19. motion 3.2.7 chickcam / # motion n 0 Processing thread 0 config file /etc/motion.conf 0 Thread 1 is from /etc/motion.c...
r5 - 07 May 2008 - 04:41 by AngelCarpintero
SupportQuestion2007x05x27x131953
Question Most of the time I run motion I start it from the start a program menu in KDE. First its output is a black screen in port 8081. Then I restart it in port...
r9 - 07 May 2008 - 04:39 by AngelCarpintero
SupportQuestion2007x07x11x215104
Question Dear motion keepers. I opened a new request, because I downloaded, and compiled version 3.2.8. The important result, is the same as before, to work, moti...
r3 - 07 May 2008 - 04:39 by AngelCarpintero
SupportQuestion2008x02x13x034551
Question Hello. I am a newbie to the world of linux, and i have never compiled and installed a program like this before....so, please bear with me. :) I have inst...
r3 - 07 May 2008 - 04:38 by AngelCarpintero
SupportQuestion2008x03x06x102257
Question I am using Motion for my project. Motion is definitely an excellent program with motion detection. I installed the Motion in the Buffalo Linkstation with...
r4 - 07 May 2008 - 04:37 by AngelCarpintero
SupportQuestion2008x04x16x222438
Question I'm compiling without linux threads and dont need support for BKTR because i'm using a philips webcam "Vesta Pro". i just can't seem to get Motion to run...
r6 - 07 May 2008 - 04:34 by AngelCarpintero
SupportQuestion2008x03x08x165728
Question How to add motion to start motion in run level 2 ? Environment Motion version: 3.2.9 ffmpeg version: Libraries: ffmpeg Server...
r3 - 07 May 2008 - 04:33 by AngelCarpintero
SupportQuestion2007x05x10x212739
Question The first frame that motion takes is always mostly green. I'm using motion 3.2.7 source running in daemon mode. I'm using a philips SPC 9000NC with pwc d...
r2 - 07 May 2008 - 04:32 by AngelCarpintero
SupportQuestion2006x10x09x013157
Question When I run motion in setup mode and watch the output, the threshold value never changes. I can set the initial value, but it will never auto tune it self...
r3 - 07 May 2008 - 04:31 by AngelCarpintero
NetcamFileURLPatch
New feature on netcam_url option and enabling file:///... urls Description of Patch I developed a patch for motion project on svn trunk branch (next 3.2.8 releas...
r6 - 07 May 2008 - 04:27 by AngelCarpintero
PreviewCenter
Preview image based center of image Description of Patch PreviewCenter selects the preview image based on how far center of motion is from center of the image. T...
r9 - 07 May 2008 - 04:26 by AngelCarpintero
WatchdogAndThreadPatch
Watchdog and thread video device patch Description of Patch Motion isn't able to start if a video device isn't there at startup, Motion even exits if it can't ca...
r10 - 07 May 2008 - 04:25 by AngelCarpintero
RemoveLowCpuFeature
Remove 'low_cpu' Feature Description of Patch Since the introduction of the 'pre_capture' feature, 'low_cpu' doesn't work very well anymore. The pre_capture buff...
r9 - 07 May 2008 - 04:25 by AngelCarpintero
RemoveNightCompensate
Remove night_compensate feature Description of Patch I would like to entirely remove the night_compensate feature. It tries to lower the noise level by a fixed v...
r6 - 07 May 2008 - 04:25 by AngelCarpintero
ConfigureScript
Configure Script Configure is script that you run to setup the build environment for the C compiler. It generates the "Makefile" which the program "make" uses t...
r6 - 07 May 2008 - 03:59 by AngelCarpintero
FeatureRequest2008x03x18x094405
Feature Request: Description Hi. Rather than using serial ports and dedicated custom protocol for driving X Y steppers, it should be simpler to use parallel po...
r3 - 03 May 2008 - 17:49 by KennethLavrsen
FeatureRequest2008x04x17x001820
Feature Request: Description I am currently capturing 10fps (to try and get smooth video). I had a look at the output of motion that shows the changed pixels. ...
r5 - 30 Apr 2008 - 19:37 by DagErlandsson
FeatureRequest2007x01x22x231542
Feature Request: Description Hi, I use a lightweight server (Linksys NSLU2 running Openslug) which is all I can house in my 'server cupboard'. It only uses 10 ...
r31 - 25 Apr 2008 - 06:41 by SimonW
SupportQuestion2008x04x20x185055
Question Hi, is it possible to completely disable the motion detector and only use the webcam server to save some cpu time? TIA Environment Motion version: ...
r2 - 21 Apr 2008 - 12:27 by AngelCarpintero
SupportQuestion2008x04x16x205009
Question I have a project where I must use a USB video capture device. I will need only Composite Video (phono plug) type input. I will not need a TV tuner. I hav...
r2 - 17 Apr 2008 - 02:51 by AngelCarpintero
ConfigOptionNightCompensate
* Type: * Range / Valid values: * Default: * Option Topic It has normally been the advice not to use this with 'noise_tune' turned on. However the lat...
r8 - 14 Apr 2008 - 16:12 by KennethLavrsen
FeatureRequest2007x12x16x132522
Feature Request: Description This was discussed with sack, Lavr and joergw a couple of weeks ago on #motion so I figured I will add an actual feature request o...
r20 - 13 Apr 2008 - 23:33 by AngelCarpintero
SupportQuestion2008x04x03x114928
Question Paste in your error messages, config settings, terminal window output etc in this text field. Environment Motion version: 3.2.9 ffmpeg versio...
r3 - 07 Apr 2008 - 05:55 by RogerWyss
BugReport2008x04x06x121225
BUG: Unlike on_picture_save, %q always returns "00" when used on_movie_end :( I would really love if %q would equal the last frame number which would essential...
r3 - 06 Apr 2008 - 22:31 by BobSaggeth
ConvertTo3gp
Script that converts your avi files into 3gp files Introduction Ever wanted to connect with your mobile phone to motion and download the latest movies? This scri...
r10 - 06 Apr 2008 - 20:00 by JohnPowell
SupportQuestion2008x04x04x110137
Question I have tried the following two php commands but still cannot start the Motion though php. The motion can be started by typing the command line "motion" d...
r3 - 05 Apr 2008 - 10:43 by JackK
FeatureRequest2008x03x31x193142
Feature Request: Description I miss a option in motion.conf to disable storage of jpeg files. Or did I missed something? Main.AndreasLindner 31 Mar 2008 F...
r2 - 01 Apr 2008 - 02:21 by AngelCarpintero
FeatureRequest2006x01x27x205412
Feature Request: Description Hi, is it possible to have an user and password in the webcam http, like "control_authentication" ? for example "webcam_authentica...
r4 - 30 Mar 2008 - 08:16 by AngelCarpintero
FeatureRequest2007x02x06x231543
Feature Request: Hi! I am sorry for my english. I have changed function start() in /etc/rc.d/init.d/motion for run motion with non priviledged UID and special um...
r3 - 30 Mar 2008 - 08:09 by AngelCarpintero
SupportQuestion2007x03x19x120345
Question Hi, i try to setup some new cameras to work with motion, i got 5 terracam usb pro v2 from terratec and tried to get them to work for every cam i try i ...
r4 - 30 Mar 2008 - 07:21 by AngelCarpintero
Number of topics: 50
< Previous Page 25 of 41 Next >
See also:
RSS feed, recent changes with 50, 100, 200, 500, 1000 topics, all changesCopyright © 1999-2025 by the contributing authors.
All material on this collaboration platform is the property of the contributing authors.
Please do not email Kenneth for support questions (read why). Use the Support Requests page or join the Mailing List.
This website only use harmless session cookies. See Cookie Policy for details. By using this website you accept the use of these cookies.
Please do not email Kenneth for support questions (read why). Use the Support Requests page or join the Mailing List.
This website only use harmless session cookies. See Cookie Policy for details. By using this website you accept the use of these cookies.