50 recent changes in Motion Web retrieved at 16:03 (GMT)
FeatureRequest2005x12x24x200321
Feature Request: Description Is it possible to make motion recognize an external signal (similar to SIGUSR1) that will make it capture a configurable number of ...
r3 - 30 May 2006 - 09:55 by MikeMullins
SupportQuestion2006x05x27x123932
Question Thanks for your reply to question 2006x05x23x092215. Sorry to bother you again, I can't get the nph mjprox to work. In your applet snippet, you state cam...
r2 - 27 May 2006 - 16:43 by KennethLavrsen
CreateBugReport
#SubmitNewBug Submit New Bug Report This form starts a new topic for each bug. * Consider filing a Support Request unless you are very sure you have found a...
r12 - 26 May 2006 - 13:53 by KennethLavrsen
ExecProxyPatch
exec_proxy Description of Patch A hack to allow you to specify an external program that will function as the source for a MJPEG video stream. This is useful for ...
r10 - 25 May 2006 - 10:12 by KennethLavrsen
BugReport2006x05x24x003214
BUG: Using motion with a Creative Video Blaster WebCam II on parport (cpia driver) takes 50/90% of cpu on smp bi 1.6GHz. Same config works fine with qc usb drive...
r3 - 24 May 2006 - 09:16 by JeromeV
FeatureRequest2005x12x11x010729
Feature Request: Description consider support of as a replacement for current motion detection scheme: Gandalf Library http://gandalf library.sourceforge.net/ G...
r4 - 24 May 2006 - 06:25 by KennethLavrsen
BugReport2006x05x23x092100
BUG: I've also observed that autobrightness blinks. But when autobrightness is off and I change bright, saturation or hue, screen goes white too. Then, if I cha...
r3 - 24 May 2006 - 06:20 by KennethLavrsen
BugReport2006x03x04x110846
BUG: Recently, i posted bug that threads crash one after the other. I have resolved the problem by running separaly motion instance for each camera without any p...
r3 - 24 May 2006 - 06:13 by KennethLavrsen
SupportQuestion2006x05x23x092215
Question I use motion with three simultaneous bttv cams with three threads. I'd like to stream one of them at any one time on the same port, say 8080. Initial web...
r2 - 23 May 2006 - 23:15 by KennethLavrsen
SupportQuestion2006x05x23x081859
Question Currently there are two types of masks in motion. A "fixed mask" and an internal "smart mask". In the sections "smart_mask_speed" and "mask_file" in the ...
r2 - 23 May 2006 - 23:00 by KennethLavrsen
BugReport2005x11x22x172816
BUG: im running motion on kernel 2.4 debian box. the old version worked ok. with the new version the webcam interface disappears after 24 48 hours usually after ...
r11 - 22 May 2006 - 18:31 by PeterS
BugReport2006x05x16x085444
BUG: Hello I'm using motion 3.2.6 with an Axis 240Q video server and 4 analog cameras over a Wireless link. Everything seems to work fine, but after some hours (...
r2 - 16 May 2006 - 21:54 by AngelCarpintero
SupportEditTemplate
%NOP{ * Note: Do not edit this topic, ask a question in WebHome * Set ALLOWTOPICCHANGE = Main.TWikiAdminGroup }% Question Environment Motion version: ...
r8 - 13 May 2006 - 23:28 by KennethLavrsen
SupportQuestion2006x05x13x092955
Question when i started motion ,, following error appeared fyc@fyc:/dev$ motion 0 Processing thread 0 config file /usr/local/etc/motion.conf 0 Motion runnin...
r2 - 13 May 2006 - 10:29 by KennethLavrsen
LoggingFfmpegFix
Logging Ffmpeg Fix Description of Patch This patch will fix some erroneous log messages which may be emitted by the Ffmpeg handling code. There are some log ent...
r2 - 10 May 2006 - 00:56 by KennethLavrsen
MotionRss
MotionRss Introduction Creates RSS feed of the contents of your movies directory. Detailed Description Whenever a new movie is recorded, the RSS feed will be up...
NEW - 09 May 2006 - 09:48 by FlorianBeer
KedMotionTools
KED's Motion Tools Introduction A few tools made for my own motion usage but maybe other can make use of it or get some inspiration. I'll start with three tools...
r3 - 01 May 2006 - 11:23 by TheOtherBug
MotionClient
Software that allows you to view the motion Web streams (live video) from the cameras connected to your motion server using the MS windows platform Introduction ...
r4 - 01 May 2006 - 06:21 by KennethLavrsen
FeatureRequest2006x04x30x214936
Feature Request: Description Change Log? It would be nice to be able to see the changelog here on the wiki, a link to CVS would be fine. It takes a lot of effor...
r2 - 01 May 2006 - 06:20 by KennethLavrsen
FeatureRequest2006x04x23x101111
Feature Request: Description hej : ) motion is a suuper great program : ) but i'm searching a tool to locate a motion and get the coordinations of this detected...
r3 - 27 Apr 2006 - 06:12 by AngelCarpintero
FeatureRequest2006x04x19x082734
Feature Request: Description The present autobrightness function (in v4l_picture_controls) merely changes the device brightness to ensure that the average pixel...
r3 - 25 Apr 2006 - 15:50 by MikeScott
FeatureRequest2006x04x20x104836
Feature Request: Description I'm running a Logitech 4000 at 640x480 on a PII 450. Works really well at 5fps until night time, when I need to use despeckle to ge...
NEW - 20 Apr 2006 - 10:53 by MarkTranchant
SupportQuestion2006x04x10x163136
Question I have an Axis network camera monitoring a small street. However, there is a small piece of a busy street visible, which I want to mask out. I made a mas...
r7 - 17 Apr 2006 - 19:53 by AngelCarpintero
BugReport2006x03x19x124345
BUG: I havent't modified a single element of my system in the last hours days(updated the wxwidget two days ago) and running motion for 11 days straight uninterr...
r2 - 16 Apr 2006 - 07:50 by KennethLavrsen
SupportQuestion2006x04x14x233058
Question I have experimented with the control_localhost (on/off) settings with the following results: CASE 1 (all other motion.conf settings remain at default val...
r2 - 15 Apr 2006 - 08:41 by KennethLavrsen
BugReport2006x04x14x093732
BUG: I am using 2 cameras connected to 1 Video Capture Device with 4 inputs (/dev/video0). I have 2 thread.conf files and 1 motion.conf. They are configured corr...
r2 - 14 Apr 2006 - 12:58 by KennethLavrsen
MpegFilmsFFmpeg
Generating MPEG films with ffmpeg The ffmpeg option can generate mpeg films very fast and "on the fly". This means that the mpeg film is growing each time motion ...
r7 - 14 Apr 2006 - 03:51 by PeterKim
FeatureRequest2006x04x08x080625
Feature Request: Description I would like to have the option of starting motion with a detection delay so i can leave home without getting myself detected like ...
r4 - 12 Apr 2006 - 19:51 by KennethLavrsen
FeatureRequest2005x03x31x225825
Feature Request: Description See my answer on SupportQuestion2005x01x03x114817 See also discussion topic MotionWatchdog. Main.KennethLavrsen 31 Mar 2005 Fo...
r5 - 05 Apr 2006 - 20:41 by MichaelHarris
BugReport2006x04x02x150440
BUG: Having both noise_level and noise_tune set, motion will not try to record jpeg images to disk. Test case Following settings are used as an example. noise_t...
r3 - 05 Apr 2006 - 14:32 by AngelCarpintero
FeatureRequest2006x04x03x223638
Feature Request: Description If you have somewhat unimportant stuff happening in a far away area but close up (like near a window) you want to capture more info...
NEW - 03 Apr 2006 - 23:13 by TWikiGuest
FeatureRequest2005x04x21x052017
Feature Request: was titled: "no motion detectet since xy sec" but since the main feature was rejected I decided to change the title for the part that has been a...
r5 - 03 Apr 2006 - 22:48 by TWikiGuest
FeatureRequest2006x04x03x122941
Feature Request: Description In addition to an event, an event frame parameter could be implemented. This will function similiarly to %q which uniquely identifi...
NEW - 03 Apr 2006 - 14:27 by JoeBush
PwcConfiguration
Small patch adding pwc configuration options Description of Patch The patch adds 3 configuration options to control the behavior of the pwc tracking code. Our Lo...
r7 - 02 Apr 2006 - 17:39 by JoeBush
FeatureRequest2006x03x16x095713
Feature Request: Description Another little thing: I would like to see some indiction on the cam picture of detection being in pause state. My first suggestio...
r2 - 16 Mar 2006 - 17:54 by KennethLavrsen
VIAEzraC3Patch
Fix for VIA Ezra C3 CPUs Description of Patch Neither Motion 3.2.4 nor the daily build would run on my VIA Ezra 10000 CPU. It killed as as soon as it attempted ...
r6 - 15 Mar 2006 - 00:43 by KennethLavrsen
MotionffmpegDeinterlace
Deinterlace video input Description of Patch Motion will deinterlace frame before put them to file Installation of Patch Download the patch file. If it is packe...
r8 - 15 Mar 2006 - 00:43 by KennethLavrsen
FixTypoInComments
FixTypos Description of Patch This patch fix many typos in comments ( i ran aspell against the code ). Also there's a fix to free cnt eventtime_tm when motion e...
r4 - 15 Mar 2006 - 00:42 by KennethLavrsen
FixStringsAndDisableLabeling
disable labeling and fix strings from http Description of Patch The patch fix the management of strings from http remote control , setting to NULL when they are...
r3 - 15 Mar 2006 - 00:42 by KennethLavrsen
ReleaseNoteMotion3x2x5
Motion Release Release Notes Motion release 07 Mar 2005 Summary of changes since 3.2.4 3.2.5.1 is the exact same code as 3.2.5 but with manpage and Motion...
r5 - 14 Mar 2006 - 17:39 by TheOtherBug
BugReport2006x03x11x162137
BUG: I tried your 3.2.5.1 and still have problem of the timing of the snapshots. Comparing the "fix" you inserted to motion.c with the "proposed" fix I gave in o...
r3 - 12 Mar 2006 - 18:12 by GregSwift
SupportQuestion2006x03x11x212019
Question I know this is the wrong place to post this question, but I was not sure of where the correct place was. Many people, including Kenneth Lavrsen, have suc...
r2 - 12 Mar 2006 - 00:39 by KennethLavrsen
SupportQuestion2006x03x11x141352
Question when trying to compile i've got this message, could someone point me ? TIA Compiling Motion object files... gcc g O2 DHAVE_MYSQL I /usr/include/mysq...
r2 - 12 Mar 2006 - 00:24 by KennethLavrsen
BugReport2006x02x07x162149
BUG: I have six network cameras (DCS 900) with the snapshot interval set to 60 seconds. That should therefore be 360 snapshots per hour. Motion fails to take a s...
r4 - 12 Mar 2006 - 00:23 by KennethLavrsen
SupportQuestion2006x03x02x152208
Question Hi I have the same problem that was seen in http://www.lavrsen.dk/twiki/bin/view/Motion/BugReport2005x08x02x070017 and i have been taking a look in the m...
r8 - 05 Mar 2006 - 20:30 by AngelCarpintero
SupportQuestion2006x01x30x191510
Question Small and cheap netcam market intellinet or edimax ic 1000 in compatibility. I found a small piece of tcl code (http://gem.win.co.nz/mb/misc/edicam/) whi...
r3 - 02 Mar 2006 - 07:24 by AngelCarpintero
SupportQuestion2006x01x03x071110
Question Hello, I would like to adapt Motion's motion tracking features for a stepper motor project I'm working on. I would appreciate clarification on some of t...
r2 - 02 Mar 2006 - 07:22 by AngelCarpintero
SupportQuestion2005x12x09x000832
Question I'm using a Quickcam VC as well as a Quickcam Messenger. The VC, which is black and white, works fine in gqcam through the v4l interface, but in motion t...
r3 - 02 Mar 2006 - 06:53 by AngelCarpintero
SupportQuestion2005x09x27x201828
Question Hello Kenneth I tried 3.2.4.snap2 as you recommended but the problem still remains. With switchfilter on no one motion is detected. motion version moti...
r8 - 02 Mar 2006 - 06:52 by AngelCarpintero
BugReport2006x02x23x163414
BUG: when get diskfull and motion try to save image os mpeg motion crash and exit without messages, maybe insert syslog messages and stop write, when diskspace g...
r2 - 28 Feb 2006 - 23:29 by AngelCarpintero
Number of topics: 50
< Previous Page 31 of 41 Next >
See also:
RSS feed, recent changes with 50, 100, 200, 500, 1000 topics, all changesCopyright © 1999-2025 by the contributing authors.
All material on this collaboration platform is the property of the contributing authors.
Please do not email Kenneth for support questions (read why). Use the Support Requests page or join the Mailing List.
This website only use harmless session cookies. See Cookie Policy for details. By using this website you accept the use of these cookies.
Please do not email Kenneth for support questions (read why). Use the Support Requests page or join the Mailing List.
This website only use harmless session cookies. See Cookie Policy for details. By using this website you accept the use of these cookies.