50 recent changes in Motion Web retrieved at 23:40 (GMT)

MotionRelease3x2x1snap3

Motion Snapshot Release 3.2.1_snap3 Release Notes 3.2.1 snap3 1 Mar 2005 Development Release not recommended for normal use Changes since 3.1.19_snap3 snap1 ...

r2 - 02 Mar 2005 - 00:38 by AngelCarpintero

BugReport2005x02x24x135548

BUG: To reduce the bandwidth consumed while monitoring my cam using motion's mini http server, I tried setting webcam_maxrate 0.1 in the config file. As soon as ...

r5 - 28 Feb 2005 - 15:40 by RaphaelAssenat

MotionRelease3x2x1snap2

Motion Snapshot Release 3.2.1_snap2 Release Notes 3.2.1 snap2 26 Feb 2005 Development Release not recommended for normal use Changes since 3.1.19_snap3 snap1...

NEW - 26 Feb 2005 - 09:35 by KennethLavrsen

MotionRelease3x2x1snap1

Motion Snapshot Release 3.2.1_snap1 Release Notes 3.2.1 snap1 16 Feb 2005 Development Release not recommended for normal use Changes since 3.1.19_snap3 snap1...

r7 - 26 Feb 2005 - 09:24 by KennethLavrsen

SupportQuestion2005x02x25x122038

Question Hi folks, I am looking for a Live CD that incorporates Motion? This is for a simple single webcam monitoring application. Does anyone have any experienc...

r2 - 26 Feb 2005 - 00:37 by KennethLavrsen

SupportQuestion2005x02x21x213030

Question Running motion 3.1.18 on FC3 HP TC2120 server with Hauppage WinTV Express card. Kernel is 2.6.10 1.766_FC3 #1 USB camera works just fine. However when ...

r7 - 26 Feb 2005 - 00:30 by KennethLavrsen

SupportQuestion2005x02x24x125815

Question I am trying to use motion for timelapse recordings to replace a timelapse VCR we have so we can file the videos on DVD. I would like to use Motion but th...

r4 - 26 Feb 2005 - 00:01 by KennethLavrsen

MotionRelease3x1x19snap4

Motion Snapshot Release 3.1.19_snap4 Release Notes 3.1.19 snap4 25 Feb 2005 Development Release not recommended for normal use Changes since 3.1.18 snap1 ...

r2 - 25 Feb 2005 - 22:17 by KennethLavrsen

BugReport2005x02x07x100303

BUG: i get this error during configure "configure: error: cannot compute sizeof (short int),77" it was reported in snap8 but the solution put ther (installing li...

r10 - 25 Feb 2005 - 19:43 by AngelCarpintero

BugReport2005x01x30x190907

BUG: Starting motion 3.1.18 it writes out Thread0 device: /dev/video0 input: 8 Illegal instruction and steps out. Test case EPIA 5000 mainboard, spca50x camera ...

r8 - 25 Feb 2005 - 19:42 by AngelCarpintero

MotionRelease3x1x19snap3

Motion Snapshot Release 3.1.19_snap3 Release Notes 3.1.19 snap3 16 Feb 2005 Development Release not recommended for normal use Changes since 3.1.18 snap1 ...

r3 - 17 Feb 2005 - 21:06 by AngelCarpintero

MotionRelease3x1x19snap2

Motion Snapshot Release 3.1.19_snap2 Release Notes 3.1.19 snap2 15 Feb 2005 Development Release not recommended for normal use Changes since 3.1.18 snap1 ...

r2 - 15 Feb 2005 - 14:51 by AngelCarpintero

SupportQuestion2005x02x14x143258

Question Hi there I want to truncate the motion detected video at say 5 seconds, then not produce any more video for say 2 minutes. I tried setting gap 120 ma...

r2 - 15 Feb 2005 - 07:24 by KennethLavrsen

BugReport2005x02x11x150802

BUG: Building an RPM from the makefile included with the source fails to use the DESTDIR environment variable. This results in modifications to the primary file...

r4 - 14 Feb 2005 - 05:22 by AngelCarpintero

MotionRelease3x1x19snap1

Motion Snapshot Release 3.1.19_snap1 Release Notes 3.1.19 snap1 09 Feb 2005 Development Release not recommended for normal use Changes since 3.1.18 snap1 ...

r4 - 14 Feb 2005 - 05:02 by AngelCarpintero

BugReport2005x02x11x170019

BUG: %makeinstall section of motion.spec (line 33) included with source attempts to mv motion dist.conf from %{_sysconfdir} directory to %{_sysconfdir}/%{name} d...

r4 - 14 Feb 2005 - 04:55 by AngelCarpintero

PreCaptureThrottleLoad

Feature Proposal Redesign pre_capture to throttle load when many frames have to be processed Feature proposal added by Main.JoergWeber 15 Sep 2004 Proposal 10...

r7 - 13 Feb 2005 - 16:09 by KennethLavrsen

BugReport2005x02x12x013830

BUG: i have a recording which stopped in the middle of motion. nothing in the messages file. but the sequence is clearly truncated. the config is set for 5 pr...

r3 - 13 Feb 2005 - 11:15 by KennethLavrsen

SupportQuestion2005x01x07x150123

Question motion coredumps on me everynight, it seems to run just fine all day long but dumps in the middle of the night. here are my logs: Jan 6 13:43:28 731CAM...

r4 - 12 Feb 2005 - 01:41 by AngelCarpintero

BugReport2004x10x25x084137

BUG: looks like this on FreeBSD 4.10 STABLE after motion has been running for ~32 hours = 77096 root /usr/local/bin/motion \ 77097 root /usr/local/bin...

r6 - 12 Feb 2005 - 01:34 by AngelCarpintero

SupportQuestion2005x02x04x091351

Question I have a capture card called GrandTek bt848 with 4 ports for 4 cammeras. I whanted to ask you how exactly cand i configure that all the 4 cameras conecte...

r2 - 04 Feb 2005 - 18:04 by KennethLavrsen

SupportQuestion2005x02x02x184321

Question This is a follow up question to SupportQuestion2005x01x28x222114 Thanks for your quick answer. Unfortunately this does not work for me. Computer: A 120MH...

r2 - 02 Feb 2005 - 21:43 by KennethLavrsen

SupportQuestion2005x02x02x070318

Question I m using Motion 3.1.17 with 3 D link DCS900 network cameras. It was working fine with 1 camera. Then I added two more and the problems started. Recordin...

r2 - 02 Feb 2005 - 07:48 by KennethLavrsen

RotatePatch

Updated Rotate Patch ( Speed Improvement ) Introduction The updated rotate patch was created for two reasons: 1. Possible bugs in the original rotate patch. ...

r21 - 30 Jan 2005 - 13:44 by KennethLavrsen

MakefileWithAutoDependencies

Makefile with Auto Dependencies Introduction Ok, so this isn't really a patch. It's a new Makefile.in that automatically calculates dependencies between source a...

r6 - 30 Jan 2005 - 13:43 by KennethLavrsen

LabelingSpeedPatch

Labeling Speed Improvement Patch Introduction This patch improves the speed of the alg_labeling function substantially. It also fixed a bug in said function. De...

r7 - 30 Jan 2005 - 13:43 by KennethLavrsen

DilateNineSpeedPatch

Dilate9 Speed Patch Introduction This patch was created to improve the speed of the dilate9 function in alg.c. As can be seen in the execution profile when motio...

r6 - 30 Jan 2005 - 13:42 by KennethLavrsen

DilateFiveSpeedPatch

Dilate5 Speed Patch Introduction This patch is similar to the DilateNineSpeedPatch, but improves the speed of the dilate5 function instead. As can be seen in the...

r3 - 30 Jan 2005 - 13:42 by KennethLavrsen

BrightnessContrastPatch

Patch Title Brightness, Contrast, Saturation, Hue Introduction This patch allows motion to set the brightness, contrast, saturation and hue for a video source. ...

r21 - 30 Jan 2005 - 13:41 by KennethLavrsen

BugReport2004x12x15x102245

BUG: Using last snapshot ( motion 3.1.18_snap8 ) with ffmpeg 0.4.8 compiled from source and with logitech Sphere ( pwc 10.0.5 ). modprobe pwc size=vga mbufs=3 ...

r3 - 30 Jan 2005 - 13:31 by KennethLavrsen

BugReport2005x01x05x174139

BUG: The end of output of motion h says Will read motion.conf from current directory, ~ and /opt/motion/motion 3.1.17/etc. Where "~" should apparently actually ...

r3 - 30 Jan 2005 - 13:31 by KennethLavrsen

BugReport2005x01x06x103939

BUG: Does that phrase in docs mean "enable only one of" or "don't confuse with"? Test case Environment Motion version: 3.1.17 Shared libraries: ...

r3 - 30 Jan 2005 - 13:30 by KennethLavrsen

BugReport2005x01x10x095715

BUG: The configuration is working with motion version 3.1.17 but the crash occurs in the version 3.1.18. The behaviour of motion is a little bit strange: if a se...

r10 - 30 Jan 2005 - 13:30 by KennethLavrsen

BugReport2005x01x13x131304

BUG: My Labtec (HDCS 1020) camera is mounted upside down. Using rotate 180 gives some sort of interleaved corruption of the image. I have to use an external scri...

r4 - 30 Jan 2005 - 13:29 by KennethLavrsen

BugReport2005x01x06x181426

BUG: When mencoder (of the Mplayer package) is encoding and the user presses ^C, mencoder completes the file gracefully and exits only then, thus leaving behind ...

r6 - 30 Jan 2005 - 13:29 by KennethLavrsen

BugReport2004x12x02x115356

BUG: This program runs well straight from the debian package with the given config file. However, when I add the command "rotate 180" in the config file, motion ...

r7 - 30 Jan 2005 - 13:29 by KennethLavrsen

BugReport2004x10x26x134906

BUG: When running motion as daemon, I am getting application bug warnings emitted from SYSLOG an Redhat AS 3. The error is as follows. Oct 26 08:43:43 localhost...

r5 - 30 Jan 2005 - 13:28 by KennethLavrsen

BugReport2005x01x23x133554

BUG: From IRC #Motion 23 Jan 2005 13:53 I am (happily!) using motion 3.1.17. the timelapse mpegs sometimes do not rotate at midnight each day, but keep going...

r3 - 30 Jan 2005 - 13:28 by KennethLavrsen

GNUPublicLicense

r2 - 30 Jan 2005 - 13:08 by KennethLavrsen

PhilipsWebcamDriverDebate

Philips Webcam Driver Debate Background Subjective and biosed statement from Kenneth Lavrsen as a starting point for debate. This text was originally on the info...

r4 - 30 Jan 2005 - 13:06 by KennethLavrsen

RemoteControlXmlRpc

Controlling Motion via XML RPC Motion version 3.1.12 has got a new exciting feature which is the ability to control Motion while it is running. Motion now has a b...

r5 - 30 Jan 2005 - 00:36 by KennethLavrsen

ReleaseNoteMotion3x1x17

Release Note Motion 3.1.17 3.1.17 Bugfix release snap1 * Removed annoying debug syslog message (input: #) * Implemented Peter Ilin's patch for handling v...

NEW - 29 Jan 2005 - 17:53 by KennethLavrsen

GenHtmlShellScript

genhtml.sh Author: Main.JeroenVreeken Submitted by. Main.KennethLavrsen Generates output similar to show.cgi but without the header. Depends on the chosen filenam...

r2 - 29 Jan 2005 - 15:45 by KennethLavrsen

PerlParseMJPEGStream

Perl Parse MJPEG Stream Introduction This project is just for posting Perl code snippets for parsing an MJPEG Stream in real time. Detailed Description I don't ...

r5 - 29 Jan 2005 - 15:45 by KennethLavrsen

SupportQuestion2005x01x28x222114

Question Thanks for motion! What I am after is something like this: just as lastsnap.jpg is the last picture taken, it would be very useful to have something like...

r2 - 28 Jan 2005 - 23:10 by KennethLavrsen

SupportQuestion2005x01x24x005849

Question First off, let me say thank you. Motion is an excellent product and you can bet I'll be telling my friends about it. Now on to the questions: Is there an...

r2 - 24 Jan 2005 - 07:54 by KennethLavrsen

SupportQuestion2005x01x06x201636

Question I want to run motion as apache, to be able to use webdav for collecting data from the storage directory. The only way I know, is before running motion to...

r3 - 18 Jan 2005 - 01:34 by KennethLavrsen

WebCam

Main.SebastienFricker 16 Jan 2005

NEW - 16 Jan 2005 - 09:55 by SebastienFricker

SupportQuestion2005x01x14x215833

Question My camera is mounted upside down, and I use rotate 180 to correct it. Is the mask image applied before or after the rotation? Environment Motion versi...

r2 - 15 Jan 2005 - 07:43 by KennethLavrsen

SupportQuestion2005x01x14x012409

Question Sorry for the dumb question, but I reccently upgraded from an old version to 3.1.18 snap 8, in the older version jpeg_cleanup worked with ffmpeg. The do...

r2 - 14 Jan 2005 - 21:14 by KennethLavrsen

Number of topics: 50

< Previous Page 39 of 41 Next >

See also:

RSS feed, recent changes with 50, 100, 200, 500, 1000 topics, all changes

This topic: Motion > WebHome > WebChanges
Topic revision: 27 Oct 2010, KennethLavrsen

Copyright © 1999-2025 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Please do not email Kenneth for support questions (read why). Use the Support Requests page or join the Mailing List.
This website only use harmless session cookies. See Cookie Policy for details. By using this website you accept the use of these cookies.