Motion - Web Index

Detailed topic list for Motion Web

Results from Motion web retrieved at 22:53 (GMT)

BugReport2005x01x16x030209
BUG: The streaming netcam feature used with a Panasonic KX HCM280 produces errors and terminates motion. Security is enabled on the camera. netcam_userpass motio...
BugReport2005x01x23x133554
BUG: From IRC #Motion 23 Jan 2005 13:53 I am (happily!) using motion 3.1.17. the timelapse mpegs sometimes do not rotate at midnight each day, but keep going...
BugReport2005x01x30x073616
BUG: In the documentation for the gap setting, it indicates that the timer for gap is supposed to start after the post_capture has finished its last frame, but ...
BugReport2005x01x30x190907
BUG: Starting motion 3.1.18 it writes out Thread0 device: /dev/video0 input: 8 Illegal instruction and steps out. Test case EPIA 5000 mainboard, spca50x camera ...
BugReport2005x01x31x211756
BUG: Someone kindly reported that Motion 3.1.18 fails to save timelapse mpegs when setting ffmpeg_timelapse = 1. Test case Set ffmpeg_timelapse = 1 and no mpeg ...
BugReport2005x02x01x071546
BUG: When you start Motion and have a netcam even with single jpegs Motion often stops right away. Test case I have used your URL and I can for sure say tha...
BugReport2005x02x03x035918
BUG: I run motion with multiple network cameras. At startup, if one of my cameras refuses a network connection then motion quits. This behavior is not good for ...
BugReport2005x02x07x100303
BUG: i get this error during configure "configure: error: cannot compute sizeof (short int),77" it was reported in snap8 but the solution put ther (installing li...
BugReport2005x02x11x150802
BUG: Building an RPM from the makefile included with the source fails to use the DESTDIR environment variable. This results in modifications to the primary file...
BugReport2005x02x11x170019
BUG: %makeinstall section of motion.spec (line 33) included with source attempts to mv motion dist.conf from %{_sysconfdir} directory to %{_sysconfdir}/%{name} d...
BugReport2005x02x12x013830
BUG: i have a recording which stopped in the middle of motion. nothing in the messages file. but the sequence is clearly truncated. the config is set for 5 pr...
BugReport2005x02x12x172946
BUG: When i run Motion with 2 NetCams, one Cam ist stopping after a short time. My NetCam from Thread1 is a D Link dcs 900, the Cam for Thread2 is an Axis 205. B...
BugReport2005x02x19x175939
BUG: motion has been running fine. got a segmentation fault this am. discovered it some hours later. re ran motion. almost instant seg fault. and again, sim...
BugReport2005x02x23x095334
BUG: Suse have not provided much in their personal CD not geven gcc! As a result motion will not compile once gcc and ffmpeg (either 0.4.8 or 0.4.9.1pre1) is i...
BugReport2005x02x24x135548
BUG: To reduce the bandwidth consumed while monitoring my cam using motion's mini http server, I tried setting webcam_maxrate 0.1 in the config file. As soon as ...
BugReport2005x02x26x195358
BUG: I am using a P2 450 running kernel 2.6.5 on a smp machine. The capture card is a generic Videologic card using the Brooktree 848 capture chip and a single b...
BugReport2005x02x28x170109
Bug: This was originally raised as a support question but after BugReport2005x03x30x011107 was resolved I am 99% sure it will also have resolved this one because...
BugReport2005x03x01x195957
BUG: I can't set a track/set with a value higher then 9 and a negative value. I use a Logitech Sphere with pwc version 10.0.6 /2/track/set?pan=20 tilt=20 also do...
BugReport2005x03x03x141014
BUG: /tmp is growing since the use of tmpfile. Test case using motion with some netcam (axis) with threads. Environment Motion version: 3.1.19 snap4 ...
BugReport2005x03x03x232615
BUG: my configure was as follows: ./configure without pgsql However when I try to run motion, I get. motion: error while loading shared libraries: libpq.so.3: c...
BugReport2005x03x06x023010
BUG: I can run motion with 4 network cameras on 3.1.17 with no problems (other than a buildup defunct processes). My camera models are the Panasonic KX HCM280 Pa...
BugReport2005x03x21x070534
BUG: while working with onmpeg parameter, I have found that some file descriptors were leak to sub process. It can have several effects: * a good subprocess c...
BugReport2005x03x23x203016
BUG: Motion.BugReport2005x01x30x190907 did not fix the compilation issue on certain VIA processors. When compiling for VIA Samuel 2, Ezra, Ezra T architectures ...
BugReport2005x03x27x112843
BUG: Reported by Main.KennethLavrsen for Philip Marien I've come across a problem, and I'm not sure it qualifies as a bug, patch or whatever... Here it goes: if ...
BugReport2005x03x30x011107
BUG: I have (up to 5) Firewire cameras driving 5 vloopback devices into Motion. My program that drives the Firewire cameras converts all frames to rgb24 format. ...
BugReport2005x03x30x095935
BUG: When curl was ditched, so was the support for proxies. I can no longer connect to netcams outside my intranet! Test case Environment Motion version:...
BugReport2005x04x13x214912
BUG: Motion 3.2.1 memory leaks mejorly when restarted through http control. Test case * Start motion * Run top * Connect to the control port with a bro...
BugReport2005x04x24x205933
BUG: Main.KennethLavrsen has entered this bug on behalf of Main.WillCooke because the bug is so nasty that it is worth having proper traceability on. Originally ...
BugReport2005x05x02x180550
BUG: As described at http://dotnetjunkies.com/WebLog/afontes/archive/2004/10/15/28726.aspx motion headers cause HTTP protocol violation when using DOT.NET The is...
BugReport2005x05x02x205307
BUG: HTTP Protocol not compatible some clients like pclient (palantir) can't read header i changed the code, it's on http://www.roberto.spadim.com.br/webcam.c no...
BugReport2005x05x06x122523
BUG: mmap may not be working, or working wrong the fps is too loo, 10 fps using the palantir server i can get 30 fps Test case Environment Motion version...
BugReport2005x05x06x174416
BUG: This is a megapixel lumenera camera. When connecting to the mjpeg stream, motion says: unknown Content Type It looks like this to me. I don't know if the...
BugReport2005x05x07x042849
BUG: we are getting there! files are attached Test case Environment Motion version: 3.2.1 snap16a ffmpeg version: Shared libraries: ...
BugReport2005x05x09x003527
BUG: when i changed height 288, width 352 to height 360, width 440 (*1.25) i get a green screen in webcam server i'm using round robin (4 threads channel: 0,1,...
BugReport2005x05x09x004056
BUG: if you set first thread to 640x480 and second to 320x240 server don't works and crash with * glibc detected * free(): invalid pointer: 0xb4658008 * device: ...
BugReport2005x05x21x105335
BUG: Posted by Main.KennethLavrsen from mailing list posting from Main.ChristopheGRENIER Sometimes motion try to free an invalid memory area for (j=0; config_par...
BugReport2005x05x22x213229
BUG: Jeff A. Volckaert reported on the Motion mailing list To: Subject: Motion user mpeg4 @ 0x377a10 only YUV420 is supported I have a fresh install of snap ...
BugReport2005x05x26x125712
BUG: When running with 3 netcams, there are 7 threads/processus, main and 2 threads per netcam (1 3*2=7, no http control, no webcam). When hitting Ctrl C, most o...
BugReport2005x06x23x065932
BUG: BUG: Motion will not run with ffmpeg 0.4.9pre1 CVS builds from at least 20050517 and on. The ffmpeg guys have changed the API again on the CVS version of ff...
BugReport2005x07x14x172735
BUG: I have my camera pointed at a busy street. I am seeing motion pictures posted in reverse order. For example, car enters scene is 02 20050714095026 00.jpg, c...
BugReport2005x07x14x212356
BUG: Bug BugReport2005x02x11x170019 included a patch to resolve the issue. This was included in motion 3.1.19_snap2. It appears this bug was reintroduced with ...
BugReport2005x08x01x150922
BUG: Motion Restart Mon Aug 1 09:14:33 EDT 2005 Motion running as daemon process Thread 1 is from thread1.conf Thread 2 is from thread2.conf Thread 1 started Thr...
BugReport2005x08x02x070017
BUG: From email on mailing list from Bill Maidment ./configure and ./configure with mysql=/usr/lib64 and ./configure with mysql=/usr/lib64/mysql all give me: c...
BugReport2005x08x04x220823
BUG: With this version, motion can no longer find my ffmpeg shared object libavformat.so Test case 1. Ensure that ffmpeg is not installed in the standard dir...
BugReport2005x08x05x173526
BUG: I have motion 3.2.2_snap9. The bug seems to happen when motion is killed, and what seems to happen is that motion will create a duplicate of the last image ...
BugReport2005x08x05x210647
BUG: So the ffmpeg guys have AGAIN change the API email from ML When I try and compile Motion I get the following errors: ffmpeg.c:315: error: request for membe...
BugReport2005x08x07x182533
BUG: When generating msmpeg4 movies with motion the ffmpeg code produces this msmpeg4v2 @ 0xb44350 warning, clipping 1 dct coefficients to 127..127 msmpeg4v2 ...
BugReport2005x08x14x202757
BUG: Thread debugging using libthread_db enabled New Thread 1080705760 (LWP 21038) 0 Processing thread 0 config file /etc/motion 3.2.2/motion.conf 0 Pr...
BugReport2005x08x15x140701
BUG: It seems that the text added is detected as motion. I have set in motion.conf: locate off text_right "%Y %m %d\n%T %q %v" text_changes on I first noticed it...
BugReport2005x08x15x150416
BUG: after changing to 3.2.2 i noticed that motion simply stops working when i enable the netcam no error messages or any other hints the netcam is a wcs2003 f...
Number of topics: 50
< Previous Page 2 of 41 Next >

See also the faster WebTopicList
Topic revision: r4 - 19 Aug 2014, KennethLavrsen
Copyright © 1999-2017 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Please do not email Kenneth for support questions (read why). Use the Support Requests page or join the Mailing List.
This website only use harmless session cookies. See Cookie Policy for details. By using this website you accept the use of these cookies.