Motion - Web Changes

You are here: Foswiki>Motion Web>WebChanges (27 Oct 2010, KennethLavrsen)Edit Attach

100 recent changes in Motion Web retrieved at 20:00 (GMT)

SupportQuestion2015x10x12x201219

Question I am running an external command on the on_movie_end event. This external command may take some time to run, and I don't want motion to be paused waiting...

r2 - 22 Nov 2015 - 18:40 by MrDave

SupportQuestion2015x10x14x024210

Question I have a LaView LV CDP6014 network camera and I cannot find a way to add it to Motion. Specifically I am using MotionEye but I don't think that is releva...

r2 - 22 Nov 2015 - 18:37 by MrDave

FeatureRequest2015x10x25x140343

Feature Request: Description Open Network Video Interface Format is supported by an increasing number of IP surveillance cameras. That makes ONVIF an obvious st...

r2 - 22 Nov 2015 - 17:51 by MrDave

BugReport2015x11x05x002634

BUG: I have installed Motion on a new Raspberry Pi 2 with the latest "Jessie". I have never had any issues but now things are not working as they should be. With...

r2 - 22 Nov 2015 - 17:38 by MrDave

SupportQuestion2015x11x05x020025

Question Is there any way to make an installer for Mac OS? Forgive me but I'm not big into Linux/Unix or keen on how to compile source code properly. I see ther...

r2 - 22 Nov 2015 - 17:31 by MrDave

SupportQuestion2015x11x09x125704

Question what is method that use in this aplication to detecting the motion Environment Motion version: 3.2.12 ffmpeg version: Libraries: ffm...

r2 - 22 Nov 2015 - 17:26 by MrDave

SupportQuestion2015x11x01x100440

Question I have a IPC model LS IPK 15 camera from China that I can configure with NVSIP applicaiton (available for Android or iPhone). I can also acess to the s...

r2 - 22 Nov 2015 - 17:15 by MrDave

Logitech

Logitech 3000 and 4000 Both work very well. Driver: pwc/pwcx. Main.KennethLavrsen 15 Sep 2004 The new pwc only driver works well with my 4000 at 640x480. A gr...

r14 - 15 Nov 2015 - 05:09 by RaspI

MotionViewAndControll

An android App and Widget to view and control your Motion server from your phone Introduction Modified version of Simple Mjpeg streaming viewer for android ( htt...

r2 - 10 Nov 2015 - 14:47 by RatMole

PatchworkForNewRelease

A set of patches for "3.4" release Attached are a set of files for the creation of a new release. Installation of Patch Two variants of the same patches are subm...

r5 - 01 Nov 2015 - 16:28 by MrDave

BugReport2015x10x24x203225

BUG: If the capture device returns single jpeg pictures with size more 1mb then image will be truncated. The cause of this behaviour is the value of inline const...

NEW - 24 Oct 2015 - 20:38 by KonstantinSokolov

BugReport2015x10x23x194416

BUG: Crash With Logrotate I was having issues with the rpmfusion version of motion with Fedora 20 crashing late at night. I figured out that it was crashing when ...

NEW - 23 Oct 2015 - 20:01 by HarlanDaneker

SupportQuestion2015x10x16x151208

Question Hi All, I'm running Motion on a Raspberry Pi2. Everything seems to work OK as long as the target directory is set to the default /var/lib/motion. but whe...

NEW - 16 Oct 2015 - 16:00 by PuckeyP

SupportQuestion2015x10x12x121452

Question Hello everyone, I'm using Intel Edison mini breakout board which runs Yocto Linux operating system. I need help in 2 issues: 1) I'm trying to install Mot...

NEW - 12 Oct 2015 - 12:32 by FalakDesai

ACTi

To get ACTi cameras working you need the latest firmware for the camera. Use the value in motion.conf: netcam_url http://192.168.1.100/cgi bin/cmd/system?GET_STRE...

r5 - 06 Oct 2015 - 10:06 by DmitryTsarev

SupportQuestion2015x10x02x185939

Question Hi all, I'm trying to configure my Raspberry Pi as a DVR using the Pi Cam Module and several network IP cams (just one IP cam for now). I have Raspbian ...

r2 - 04 Oct 2015 - 17:23 by DouglasHurd

BugReport2015x09x30x203633

BUG: It seems that during init, pthread_getspecific( tls_key_threadnr ); is being called before the call to pthread_key_create(). On glibc I think getspecific i...

NEW - 30 Sep 2015 - 20:42 by DaveFlogeras

SupportQuestion2015x09x24x193945

Question Hi, first, thanks so much for providing this really useful piece of software! Here my question: Because of using an ethernet expander to bride about 20 ...

NEW - 24 Sep 2015 - 20:04 by DieterB

SupportQuestion2015x09x15x095956

Question Hi! I am referencing a motion stream on http://localhost:8081 but got a security error (the stream is displayed in a WebGL context). Do you know if there...

NEW - 15 Sep 2015 - 11:53 by FranceTittu

FeatureRequest2007x02x16x195401

Feature Request: Description I am looking for a way to automatically create a Edit Decision List (EDL) from video captured by multiple cameras. To do this I ne...

r7 - 11 Sep 2015 - 05:26 by GregBrandeau

SupportQuestion2015x09x04x201900

Question My motion server is a tiny Raspberry Pi with a USB camera. I don't know what frame rate it can maintain when recording, but I see the resulting .flv file...

NEW - 04 Sep 2015 - 21:02 by MarkusK

SupportQuestion2015x07x30x150540

Question I am tracking streams from two cameras and the resolution is relatively big, providing good quality videos but putting the CPU under heavy load. The came...

r2 - 04 Sep 2015 - 20:59 by MarkusK

SupportQuestion2015x06x25x083511

Question I am using motion with raspberry pi camera module, i want the output of motion to be only jpeg image and donot require video file to be saved . Currently...

r4 - 04 Sep 2015 - 20:51 by MarkusK

FeatureRequest2015x08x23x001605

Feature Request: Description alg_labeling give diffs feedback even when not over the threshold This is especially useful when picking a threshold to see how clo...

NEW - 23 Aug 2015 - 00:18 by DavidFries

SupportQuestion2015x08x21x032200

Question Is there a way to have motion run a script on detection instead of recording video? I've got an all in one with a webcam as a photo frame and I'd like t...

NEW - 21 Aug 2015 - 03:29 by DvrHax

SupportQuestion2015x08x20x095211

Question can you help me , when i use other resolution other than 352x288, always appear error log " main: Thread 1 Watchdog timeout, trying to do a graceful re...

NEW - 20 Aug 2015 - 10:00 by JonathanRahardjo

BugReport2013x10x29x172526

BUG: It's not really a bug, but I'm not sure where else to put it. Chrome now required MJPEG streams to be on html pages inside img tags. Can you please make thi...

r4 - 19 Aug 2015 - 17:16 by MiKn

MjpgStreamer

Convert v4l2 to mjpeg stream Introduction mjpg_streamer takes input from a v4l2 device and streams it in a format compatible with motion Detailed Description Ru...

r2 - 16 Aug 2015 - 17:55 by AibakiT

LoggingAgainstMotionStreamAuthPatch

Enable IP and Auth login attempts against Live Stream Description of Patch With the MotionStreamAuthPatch added to snapshot, we can expose the Live Stream Server...

r3 - 16 Aug 2015 - 15:37 by StevePowers

BugReport2015x07x30x234443

BUG: I have installed motion on several linux distros to see if this was distro dependant but it is not. Motion's all working well apart from the event_on_start...

NEW - 30 Jul 2015 - 23:51 by StephenCook

SupportQuestion2015x07x27x184223

Question I am trying to connect a Foscam FI9803P V2 to motion. The cam only supports RTSP with authentication. I tried 2 different settings in motion.conf which b...

NEW - 27 Jul 2015 - 18:56 by DanielLettau

A4Tech

A4Tech PK 900H (vimicro z star 0ac8:3500) 5960717.163368 usb 1 1: new high speed USB device number 9 using ehci pci 5960717.437133 usb 1 1: New USB device foun...

NEW - 23 Jul 2015 - 09:37 by TosiaraT

SupportQuestion2015x07x20x213901

Question Thank you for this free software and the support! I have installed motion 3.2.12 on my Raspberry Pi 2 on Ubuntu Mate 1.8.2 and I am using a USB webcam wi...

NEW - 20 Jul 2015 - 21:57 by RuGla

SupportQuestion2015x07x19x165037

Question Hi, I have a Philips SPC220NC USB webcam. The kernel driver is pac207. I can grab pictures from the camera e.g. with vgrabbj, but motion returns a "Error...

NEW - 19 Jul 2015 - 17:08 by KlingC

SupportQuestion2015x07x15x112754

Question I have a problem connecting motion to a rtsp camera stream, if i try a connection throug vlc it connect at once but when i try the same rtsp string in mo...

NEW - 15 Jul 2015 - 12:17 by KarstenDarre

SupportQuestion2015x07x13x031637

Question I've been using motion for a while now to display a web cam. I don't really utilize the motion detection but I do want to produce a daily time lapse vid...

NEW - 13 Jul 2015 - 03:40 by PaulMcCarthy

SupportQuestion2015x07x10x110304

Question Everything works fine until I updated to ubuntu 14.04. I am having problems with movie creation when I select mov as codec in ffmpeg_video_codec option. ...

r2 - 10 Jul 2015 - 13:05 by CarloOrecchia

SupportQuestion2015x06x28x233702

Question Hi I'm trying to get my motion run a script once the video file has been created. I installed motion according to this: http://elinux.org/RPi Cam Web Int...

NEW - 28 Jun 2015 - 23:48 by FlyingPersian

SupportQuestion2015x06x21x075421

Question Hi I have 3 IP cameras. 1 and 2 work flawlessly with motion as thread1 and thread2 and run at 720p. I'm using an up to date RPi2. The third camera is giv...

NEW - 21 Jun 2015 - 08:16 by DonAitken

UserFeedback

User Feedback You want to give feedback about Motion? This is the place. If you have support questions then please use the SupportRequests page to ask your su...

r81 - 16 Jun 2015 - 08:59 by VisitorWiki42

SupportQuestion2015x05x06x013406

Question I've compiled motion against my ffmpeg and it segfaults on detecting motion. I'm not quite sure it's motion's fault, but mpv plays videos fine. (gdb) run...

r2 - 15 Jun 2015 - 19:51 by MarcinJurkowski

SupportQuestion2015x06x15x095905

Question Is there any way to record from 4 cameras on any motion (on any of them) to one mpeg file that would have split screen to 4? Environment Motion versi...

NEW - 15 Jun 2015 - 10:25 by FlashT

LogitechSphereControl

Controlling a Logitech Sphere pan/tilt with Motion. To be able to control the Logitech Sphere you need one of the latest versions of the pwc driver. And you also ...

r21 - 12 Jun 2015 - 11:45 by SgtBlack

SupportQuestion2015x06x11x154355

Question I am having major problems getting my camera to connect. I have tried every option under the sun inside of motion.conf and I can't find the right netcam...

NEW - 11 Jun 2015 - 15:59 by XybotSmith

SupportQuestion2015x06x08x172246

Question My logitech C270 webcam will only work with the default width=320, height=240. When I change to 640x480, I get a segmentation fault. I have tried multipl...

NEW - 08 Jun 2015 - 17:43 by LinuxLearner

FeatureRequest2015x05x29x221057

Feature Request: Description You guys are doing a brilliant job with the motion software. First of all, I would like to thank you for that. I am using the http ...

NEW - 29 May 2015 - 22:14 by EnthusiasticMotionUser

SupportQuestion2015x05x17x163746

Question I have been using motion for a few days. It works fine, except when I attempt to add a command to the on_event_end parameter in the motion.conf script, ...

NEW - 17 May 2015 - 17:08 by GilbertWilliams

SupportQuestion2015x05x15x192612

Question i want to add "motion" in my c program. In detail is there any way to catch the event if motion is found by camera. Or any lib to integrate this with pro...

r2 - 15 May 2015 - 19:52 by SetuGupta

Axis

Axis 2100, 210 series net cameras (and quite possibly most Axis models) .. work very well with motion. Use this link in your motion.conf: * Axis 210: netcam_ur...

r6 - 15 May 2015 - 14:06 by AndersLarsson

SupportQuestion2015x05x07x014058

Question Calls to ffmpeg 2.2.14 are segfaulting again. 2.2.12 worked fine. If there any way to configure app to use ffmpeg externally (ie. piping the data into it...

NEW - 07 May 2015 - 01:51 by ChrisConner

SupportQuestion2015x05x05x175317

Question The system packages Debian 8 jessie no package ffmpeg only libav. Motion output has many jpg files. What should be done to rectify the situation? Paste i...

NEW - 05 May 2015 - 18:05 by IgorLimonov

SupportQuestion2015x05x02x074200

Question Hi all, i was trying out motion on my pi with a Logitech QuickCam. When i try to connect to the ip i just see a grey screen with 'unable to open video d...

NEW - 02 May 2015 - 07:45 by BartChaltin

SupportQuestion2015x04x28x143147

Question Is it possible to use an external script to show text on the screen? I would like to pull data from an external script and have it display in the event_...

NEW - 28 Apr 2015 - 14:48 by KeithSchmitt

SupportQuestion2015x04x22x174829

Question How to solve green only image? Camera is a Wanscam a foscam clone I believe. First camera thread working fine. Second green image. 2 End of camera conn...

NEW - 22 Apr 2015 - 18:51 by JamesRoots

SupportQuestion2015x04x22x121417

Question Motion was running fine for quite a long time built against ffmpeg 1.2.6 and with these patches: https://github.com/mapmot/moverlay/tree/master/media vid...

NEW - 22 Apr 2015 - 12:27 by StefanBruda

SupportQuestion2015x04x20x154721

Question Hi to all ! I have read this post http://www.lavrsen.dk/foswiki/bin/view/Motion/FeatureRequest2009x06x23x045436 and I have tried to download the motion G...

r3 - 22 Apr 2015 - 09:56 by EmilioDefranco

SupportQuestion2013x11x05x183558

Question After installing motion trunk I noticed that images were no longer being saved as before. That is, previously if I set post_capure to 25 and the gap to s...

r4 - 22 Apr 2015 - 08:50 by DavidRobb

SupportQuestion2015x04x13x222017

Question hello, i am getting an error while starting motion on a rpi. /etc/init.d/motion: 2: /etc/default/motion: logfile: not found motion file start_motion_daem...

r4 - 21 Apr 2015 - 21:02 by ArnaudCognard

SupportQuestion2014x05x06x220454

Question Hello, I installed the Motion package on my RPi (v2, with Debian) with a RPi camera using the instructions given at http://www.codeproject.com/Articles/6...

r4 - 12 Apr 2015 - 09:42 by TosiaraT

SupportQuestion2011x10x06x163706

Question My Motion runs for a while, generally around an hour then stops. The cameras are analog connected to an easycap device. I've just upgraded to 3.2.12 Any ...

r3 - 12 Apr 2015 - 09:23 by TosiaraT

SupportQuestion2014x10x12x155245

Question Hello, I try to install Motion on Slackware, and i have a lot of mistakes. Can you help me to instal Motion? Paste in your error messages, config setting...

r2 - 12 Apr 2015 - 09:21 by TosiaraT

SupportQuestion2014x12x02x171122

Question Afternoon there. I am using the latest version of mr dave's motion from git, running on Ubuntu 14.10, which initally runs pretty much successfully. Aft...

r2 - 12 Apr 2015 - 09:14 by TosiaraT

SupportQuestion2014x12x13x040558

Question Hi there, thanks for your work. Motion worked fine with F20. After the update to F21, with the same config file, when run it gives the error message belo...

r2 - 12 Apr 2015 - 09:09 by TosiaraT

SupportQuestion2015x01x09x181454

Question Hi there, it would be nice to have a stable release at some point, motion is great piece of software without equivalent on linux; and it is actively main...

r2 - 12 Apr 2015 - 09:07 by TosiaraT

SupportQuestion2015x01x23x222142

Question I try to use the following procedure in order to installa Motion on Centos: "RPM for Fedora on x86/x86 64 Available on RPM Fusion, build without DB sup...

r2 - 12 Apr 2015 - 09:00 by TosiaraT

SupportQuestion2015x01x29x172936

Question Hi, i've a smartphone android with ip webcam app installed and a debian pc with motion and ffmpeg installed. the smartphone in a url http://myip:8080/pho...

r3 - 12 Apr 2015 - 08:54 by TosiaraT

SupportQuestion2015x01x20x164957

Question Every image collected is spoiled by a number of blocky image artifacts that appear to be where regions of the image have been swapped or currupted. I am ...

r3 - 12 Apr 2015 - 08:51 by TosiaraT

SupportQuestion2015x02x26x122951

Question Hi all , excuse me but I am total noob in unix system so I follow a tutorial for installing motion . this one http://www.instructables.com/id/Raspberry P...

r4 - 12 Apr 2015 - 08:47 by TosiaraT

SupportQuestion2015x03x03x090955

Question Hello ! * I've configured "on_picture_save" to send me email with picture attached when motion detects movement = it works great ! :) * I've confi...

r3 - 12 Apr 2015 - 08:43 by TosiaraT

SupportQuestion2015x03x11x105920

Question Hello Motion support With a little tributaries, has managed to set up the Motion on the new Raspberry Pi 2, which have more resources to deal with than t...

r3 - 12 Apr 2015 - 08:37 by TosiaraT

SupportQuestion2015x03x23x002537

Question I am totally new to RasPi . I have to do this with my NOIR camera module on the B board: Enable the motion detect by sending a signal to an input p...

r2 - 12 Apr 2015 - 08:31 by TosiaraT

SupportQuestion2014x11x15x115926

Question I installed motion on asuswrt router through optware but when I start with "motion n" I get this error 1 ioctl (VIDIOCGCAP): Invalid argument Paste in...

r2 - 12 Apr 2015 - 08:27 by TosiaraT

SupportQuestion2011x01x09x193606

Question Hi, I am running into trouble with this camera in mjpeg mode: v4l2_palette 2 although YUYV works fine but the framerate is too low for the later (10 fps ...

r2 - 12 Apr 2015 - 08:20 by TosiaraT

BugReport2015x03x17x181334

BUG: After a while, some threads die. Actually, I still can access the web server of the cameras and see their picture, just motion lost the connection. Re start...

NEW - 17 Mar 2015 - 18:23 by HolgerJakobs

LinksToMotionWebcams

Links to Working Webcams driven by Motion You are very welcome to add a link and short description of your webcam below. Kenneth Lavrsen's Webcam Kenneth Lavrsen...

r71 - 15 Mar 2015 - 11:07 by JuanPabloDiaz

SupportQuestion2014x10x21x102158

Question I have the current trunk which supports RTSP, but I haven't been able to interface with my RSTP IP Cam. In motion.conf I'm using netcam_url rtsp://192.1...

r3 - 14 Mar 2015 - 06:39 by TosiaraT

FeatureRequest2014x04x10x134646

Feature Request: Description Raspberry Pi is gpu powerful devices but the cpu is equievalent to pentium 2 CPU is the bottleneck So motion software need improvem...

r5 - 13 Mar 2015 - 08:25 by JuergenHausladen

FeatureRequest2015x03x03x212850

Feature Request: Description I hope i didn #39;t overlooked some related suggestion. It would be great, for performance issues, to set a resolution for the moti...

NEW - 03 Mar 2015 - 22:16 by HansMLler

FeatureRequest2015x03x02x153909

Feature Request: Description Hi, nice piece of code, and stable to say first. My idea if one could use in on_picture_save something like ./mycode #37;x...

NEW - 02 Mar 2015 - 16:03 by JohnSmithCZ

MotionHttpAPI

API for HTTP Interface for Motion Output Modes The HTTP Interface have two output modes : * HTML : To use it from a web browser. * RAW : To easily be parse...

r34 - 28 Feb 2015 - 18:01 by AlAl

UmaskGroupPermission

Respect umask and allow group write permission on directories Description of Patch motion was not respecting umask (umask 0002) and allowing group write permissi...

NEW - 25 Feb 2015 - 17:52 by KennethBurgener

SupportQuestion2015x02x03x013740

Question I have been running Motion with a TrendNet IP100 and 2 Foscam 8910W cameras. Everything has been great, my only issue is that I end up with 10 20 images...

r2 - 17 Feb 2015 - 00:49 by AlanFord

SupportQuestion2015x02x09x042621

Question I would like see if my understanding about the sysconfdir configure script parameter is correct. According to http://www.lavrsen.dk/foswiki/bin/view/Mot...

NEW - 09 Feb 2015 - 05:57 by AlanFord

TCPFastOpen

Enable "TCP Fast Open" especially for listening HTTP sockets Description of Patch TCP Fast Open can greatly reduce the latency of TCP connection setup. This espe...

NEW - 27 Jan 2015 - 12:52 by FolkertvanHeusden

GenCam

GenCam Introduction Happy browsing of cam events, your personal utube Detailed Description Attached Files http://22.fi/~jyvae/gencam.tar.gz Installation requi...

r8 - 23 Jan 2015 - 17:38 by JavierMarcon

WebHttpManyThreads

webhttpd for more than 9 threads Introduction The distributed version of motion 3.2.4 fails to set camera status if the camera thread number is more than 9. This...

r6 - 10 Jan 2015 - 21:25 by DavidPowell

FeatureRequest2015x01x07x051255

Feature Request: Description Maybe im going about this all wrong but i have tied all sorts of things. What im trying to do is be able to delete the files create...

NEW - 07 Jan 2015 - 05:13 by DavidJeffery

AvoidNullDereferenceRTSPConnect

Avoid null dereference in rtsp_connect() Description of Patch Avoid a segfault when netcam_url to a rtsp netcam is wrong. Installation of Patch Download the pat...

NEW - 16 Dec 2014 - 11:15 by ChristopheGRENIER

FixMemLeakNetcamRtsp

Fix memor leak when using rtsp camera Description of Patch Fix various memory leak reported by valgrind. Installation of Patch Download the patch file. If it is...

NEW - 16 Dec 2014 - 10:42 by ChristopheGRENIER

FeatureRequest2014x12x13x223108

Feature Request: Description I have a son with epilepsy and I would like to use Motion to detect potential seizures. I have tested that with a raspberry pi came...

NEW - 13 Dec 2014 - 22:31 by MikeC

BugReport2014x12x10x212122

BUG: As mentioned above, motion uses every few seconds more Memory, until it gets killed because of a "out of memory" message in syslog. I can see the memory usa...

NEW - 10 Dec 2014 - 21:34 by ChristopherStein

BugReport2014x12x10x101759

BUG: There is a memory leak in the error path of read_rtsp_image(). It has triggered an Out of Memory. Patch included. diff rup motion/netcam_rtsp.c motion.cgr/...

NEW - 10 Dec 2014 - 10:31 by ChristopheGRENIER

BugReport2014x12x04x135313

BUG: Camera sending 1920 x 1080 fails with: netcam image height (1080) is not modulo 16 A) I tried changing netcam.c where the check occurs to be '% 8' instead o...

r4 - 05 Dec 2014 - 23:36 by GeneC

MotionDetector

dockmotion Introduction A surveillance solution base on Motion and Docker. Detailed Description It's easy and ready to use. Just plug in a webcam and run dockmo...

r2 - 03 Dec 2014 - 13:30 by KeFeiLin

NetcamModulo16Patch

Netcam Modulo 16 Patch Uploaded by Main.KennethLavrsen on behalf of Main.PeterHolik who posted it on the mailing list. Introduction Motion cannot handle image di...

r11 - 23 Nov 2014 - 02:11 by AngelVera

SupportQuestion2014x02x26x164339

Question I was running motion with 2 analog cameras connected to a standard 4 video in audio to usb adapter. (Bus 002 Device 002: ID 05e1:0408 Syntek Semiconduc...

r3 - 11 Nov 2014 - 01:58 by JulioReson

BugReport2014x09x02x113959

BUG: I use motion for my surveillance system and sometimes I get segfault when motion convert YUV420 to JPEG for streaming. I notice that this happens in some ci...

r3 - 10 Nov 2014 - 15:41 by GiovanniLicata

FeatureRequest2012x07x03x113916

Feature Request: Description At night or at a specific time span, lets say from 19:00 to 06:00, motion should automatic change its values threshold and noise_le...

r3 - 27 Oct 2014 - 13:16 by DirkBeer

BugReport2014x08x03x235204

BUG: I am not able to get motion to stream my network cameras. They are all wireless and I have already pre configured each one. I have the Foscam FI8910W and I ...

r2 - 26 Oct 2014 - 22:46 by MikeHoward

SupportQuestion2014x10x17x125508

Question Hello, I set up motion to capture a video if there is a motion within image of my door cam that works great. The main part of the image consists of the...

NEW - 17 Oct 2014 - 13:09 by RoBra81

Number of topics: 100

< Previous Page 4 of 21 Next >

See also:

RSS feed, recent changes with 50, 100, 200, 500, 1000 topics, all changes

Topic revision: r2 - 27 Oct 2010, KennethLavrsen

Motion

Welcome

Motion Web
Motion Home

Copyright © 1999-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Please do not email Kenneth for support questions (read why). Use the Support Requests page or join the Mailing List.
This website only use harmless session cookies. See Cookie Policy for details. By using this website you accept the use of these cookies.