50 recent changes in Motion Web retrieved at 14:56 (GMT)

BugReport2005x03x30x011107
BUG: I have (up to 5) Firewire cameras driving 5 vloopback devices into Motion. My program that drives the Firewire cameras converts all frames to rgb24 format. ...
r4 - 27 May 2005 - 04:04 by KennethLavrsen
BugReport2005x02x28x170109
Bug: This was originally raised as a support question but after BugReport2005x03x30x011107 was resolved I am 99% sure it will also have resolved this one because...
r7 - 27 May 2005 - 04:04 by KennethLavrsen
BugReport2005x02x12x172946
BUG: When i run Motion with 2 NetCams, one Cam ist stopping after a short time. My NetCam from Thread1 is a D Link dcs 900, the Cam for Thread2 is an Axis 205. B...
r13 - 27 May 2005 - 04:03 by KennethLavrsen
BugReport2005x04x24x205933
BUG: Main.KennethLavrsen has entered this bug on behalf of Main.WillCooke because the bug is so nasty that it is worth having proper traceability on. Originally ...
r2 - 27 May 2005 - 04:02 by KennethLavrsen
BugReport2005x02x26x195358
BUG: I am using a P2 450 running kernel 2.6.5 on a smp machine. The capture card is a generic Videologic card using the Brooktree 848 capture chip and a single b...
r7 - 27 May 2005 - 04:02 by KennethLavrsen
BugReport2005x05x02x205307
BUG: HTTP Protocol not compatible some clients like pclient (palantir) can't read header i changed the code, it's on http://www.roberto.spadim.com.br/webcam.c no...
r7 - 27 May 2005 - 04:02 by KennethLavrsen
BugReport2005x05x07x042849
BUG: we are getting there! files are attached Test case Environment Motion version: 3.2.1 snap16a ffmpeg version: Shared libraries: ...
r4 - 27 May 2005 - 04:01 by KennethLavrsen
BugReport2005x05x22x213229
BUG: Jeff A. Volckaert reported on the Motion mailing list To: Subject: Motion user mpeg4 @ 0x377a10 only YUV420 is supported I have a fresh install of snap ...
r2 - 27 May 2005 - 04:00 by KennethLavrsen
BugReport2005x05x06x174416
BUG: This is a megapixel lumenera camera. When connecting to the mjpeg stream, motion says: unknown Content Type It looks like this to me. I don't know if the...
r7 - 27 May 2005 - 04:00 by KennethLavrsen
BugReport2005x05x21x105335
BUG: Posted by Main.KennethLavrsen from mailing list posting from Main.ChristopheGRENIER Sometimes motion try to free an invalid memory area for (j=0; config_par...
r5 - 27 May 2005 - 03:59 by KennethLavrsen
BugReport2005x04x13x214912
BUG: Motion 3.2.1 memory leaks mejorly when restarted through http control. Test case * Start motion * Run top * Connect to the control port with a bro...
r4 - 27 May 2005 - 03:58 by KennethLavrsen
FeatureRequest2005x05x24x183713
Feature Request: Description It would be nice to produce xvid videos directly instead of converting them from msmpeg4 / mpeg4 through ffmpeg. Main.WolfgangAnd...
r3 - 27 May 2005 - 01:26 by AngelCarpintero
ReleaseNoteMotion3x1x20
Release Note Motion 3.1.20 Main.KennethLavrsen 26 May 2005 Note: We recommend upgrading to Motion 3.2.1. Motion 3.1.X will not be maintained much longer. Mo...
r3 - 26 May 2005 - 00:34 by KennethLavrsen
ReleaseNoteMotion3x2x1
Release Note Motion 3.2.1 Main.KennethLavrsen 26 May 2005 Summary of changes since 3.1.19 Features * Control Interface: XMLRPC replaced by http interfa...
r6 - 26 May 2005 - 00:34 by KennethLavrsen
SupportQuestion2005x05x25x084501
Question I did setup motion on my Debian system now and it works fine so far after some development of a driver for my camera. I did search in all options and did...
r2 - 25 May 2005 - 14:32 by AngelCarpintero
MotionRelease3x2x1snap17
Motion Snapshot Release 3.2.1_snap17 Release Notes 3.2.1 snap17 16 May 2005 Development Release not recommended for normal use The netcam code is still under...
r5 - 25 May 2005 - 01:44 by AngelCarpintero
MotionRelease3x1x20snap7
Motion Snapshot Release 3.1.20_snap7 Release Notes 3.1.20 snap7 26 Apr 2005 Bugfix Development Release not recommended for production use The netcam code is ...
r3 - 25 May 2005 - 00:55 by AngelCarpintero
FeatureRequest2005x05x12x041648
Feature Request: Description we could put webcam server and http control server running on the same port? if client connect to example: http://myhost:myport/web...
r2 - 24 May 2005 - 20:33 by KennethLavrsen
SupportQuestion2005x05x16x073620
Question does anybody know a eletronic circuit to talk with servos throw rs232 or rs485??? a servo to pan and another to tilt (maybe more one to zoom :P) but just...
r2 - 23 May 2005 - 21:46 by KennethLavrsen
SupportQuestion2005x05x20x164007
Question I have 3 cameras set up 2 v4l and 1 netcam. The seem to work fine (ie they detect motion and start recording and stop when the motion is done) but when ...
r4 - 23 May 2005 - 20:24 by KennethLavrsen
SupportQuestion2005x04x24x073352
Question Receiving the following messages when using Motion with an iCamView network webcam: Starting motion detection : motion Processing thread 0 config file ...
r4 - 21 May 2005 - 07:57 by KennethLavrsen
SupportQuestion2005x05x11x161256
Question root@fedora3 r # ./mostart Processing thread 0 config file /etc/motion/motion.conf Thread0 device: /dev/video0 input: 8 mpeg4 @ 0x37ee330 only YUV420...
r7 - 21 May 2005 - 07:52 by KennethLavrsen
GMotionLive
gmotionlive Introduction gmotionlive is a gtk based webcam viewer Detailed Description gmotionlive is a multipart/x mixed replace viewer. It uses gnomevfs to op...
r3 - 19 May 2005 - 04:56 by KennethLavrsen
SupportQuestion2005x05x15x002651
Question I have a Geovision GV250 card with 2 cameras. I really want to switch the PC to linux, all my other 4 are, but I need the cameras running. Is this possib...
r2 - 15 May 2005 - 07:10 by AngelCarpintero
FeatureRequest2005x05x02x210851
Feature Request: Description Optimize capture with mmap read and writes this can make capture from 10 fps to 30 fps!!! like in palantir http://www.fastpath.it/p...
r10 - 13 May 2005 - 06:16 by KennethLavrsen
BugReport2005x05x09x003527
BUG: when i changed height 288, width 352 to height 360, width 440 (*1.25) i get a green screen in webcam server i'm using round robin (4 threads channel: 0,1,...
r2 - 09 May 2005 - 05:21 by KennethLavrsen
MotionRelease3x2x1snap16
Motion Snapshot Release 3.2.1_snap16 Release Notes 3.2.1 snap16 08 May 2005 Development Release not recommended for normal use The netcam code is still under...
NEW - 08 May 2005 - 23:11 by KennethLavrsen
BugReport2005x05x06x122523
BUG: mmap may not be working, or working wrong the fps is too loo, 10 fps using the palantir server i can get 30 fps Test case Environment Motion version...
r2 - 06 May 2005 - 14:52 by AngelCarpintero
MotionRelease3x2x1snap15
Motion Snapshot Release 3.2.1_snap15 Release Notes 3.2.1 snap15 26 Apr 2005 Development Release not recommended for normal use The netcam code is still under...
NEW - 26 Apr 2005 - 05:15 by KennethLavrsen
SupportQuestion2005x04x24x145153
Question Buon giorno :D in the first place, sorry for my bad english :\ I have this problem.. After compile this versions of motion (i try on 4 different computer...
r2 - 24 Apr 2005 - 16:12 by KennethLavrsen
PatchSmartMask
Smartmask Patch Introduction Today motion provides a static mask to turn off sensitivity in certain areas. This is very usefull to mask a street with cars passin...
r29 - 23 Apr 2005 - 07:09 by KennethLavrsen
MotionRelease3x1x20snap6
Motion Snapshot Release 3.1.20_snap6 Release Notes 3.1.20 snap6 22 Apr 2005 Bugfix Development Release not recommended for production use The netcam code is ...
NEW - 22 Apr 2005 - 16:14 by KennethLavrsen
MotionRelease3x2x1snap14
Motion Snapshot Release 3.2.1_snap14 Release Notes 3.2.1 snap14 22 Apr 2005 Development Release not recommended for normal use The netcam code is still under...
NEW - 22 Apr 2005 - 16:00 by KennethLavrsen
SecureWebcamFeeds
HowTo: Secure your WebCam feeds using Apache, Basic Auth and SSL on Debian This is a draft document detailing how to use Apache to lock down your webcam feeds us...
r13 - 20 Apr 2005 - 21:31 by WillCooke
TestForm
Form Definition Support Questions Name:* *Type: Size: Values: Tooltip message: TopicTitle text 70 The title is shown in the tables Suppor...
r2 - 20 Apr 2005 - 06:28 by DianeChayer
TestPage1
TestPage1 Test page Main.KennethLavrsen 20 Apr 2005
NEW - 20 Apr 2005 - 06:19 by KennethLavrsen
TuningMotion
Tuning Motion Motion 3.2 introduces a new feature Setup Mode. This is a great new feature with really make tuning all the settings of Motion much more easy and ...
r7 - 18 Apr 2005 - 21:12 by KennethLavrsen
MotionRelease3x2x1snap13
Motion Snapshot Release 3.2.1_snap13 Release Notes 3.2.1 snap13 15 Apr 2005 Development Release not recommended for normal use The netcam code is still under...
r4 - 17 Apr 2005 - 19:26 by KennethLavrsen
StreamingNetcamWithoutCurl
Streaming Netcam Without Curl Introduction This patch was originally submitted by Christopher Price on 14th of August 2004 on the Motion Mailing List Descriptio...
r74 - 17 Apr 2005 - 02:38 by AngelCarpintero
SupportQuestion2005x04x16x144132
Question If have configured motion so that it will save every hour a mpeg movie. (Like movie %He hour) That works fine. But the next day it appends the recording ...
r3 - 16 Apr 2005 - 16:19 by KennethLavrsen
MotionRelease3x1x20snap5
Motion Snapshot Release 3.1.20_snap5 Release Notes 3.1.20 snap5 13 Apr 2005 Bugfix Development Release not recommended for production use The netcam code is ...
r2 - 15 Apr 2005 - 23:30 by AngelCarpintero
MotionRelease3x2x1snap12
Motion Snapshot Release 3.2.1_snap12 Release Notes 3.2.1 snap12 13 Apr 2005 Development Release not recommended for normal use The netcam code is still under...
r2 - 15 Apr 2005 - 23:23 by AngelCarpintero
MotionGuideSpecialFeatures
Motion Guide Special Features This topic consists of the following subtopics: TrackingControl, UsingDatabases, LoopbackDevice. Main.KennethLavrsen 13 Apr 20...
NEW - 13 Apr 2005 - 06:37 by KennethLavrsen
ErrorLogging
Error Logging Motion reports errors to the console when it runs in non daemon mode. And it outputs even more information when run in setup mode. Error logging h...
r5 - 13 Apr 2005 - 06:24 by KennethLavrsen
TrackingControl
Tracking Control This is still at the experimental stage. Read more about it motion tracking page. Tracking Feature with Logitech Quickcam Sphere/Orbit Motion ...
r3 - 12 Apr 2005 - 21:58 by KennethLavrsen
BugReport2005x02x03x035918
BUG: I run motion with multiple network cameras. At startup, if one of my cameras refuses a network connection then motion quits. This behavior is not good for ...
r7 - 12 Apr 2005 - 05:26 by BruceDurham
SnapshotsWebCam
Snapshots The Traditional Periodic Web Camera Motion can also act like a traditional web camera. See the also snapshot_filename option in the section Advanced F...
r3 - 11 Apr 2005 - 22:45 by KennethLavrsen
MotionDetectionSettings
Motion Detection Settings These are the options that controls the detection of motion. Further details follows after. Main.KennethLavrsen 05 Apr 2005
r10 - 11 Apr 2005 - 22:39 by KennethLavrsen
MotionQuickStartGuide
Father Ted's Motion Quick Start Guide
NEW - 11 Apr 2005 - 21:50 by KennethLavrsen
ImageFileOutput
Image File Output The following options controls how Motion generates images when detection motion. Main.KennethLavrsen 11 Apr 2005
r4 - 11 Apr 2005 - 06:58 by KennethLavrsen
Number of topics: 50
< Previous Page 37 of 41 Next >

See also: rss-small RSS feed, recent changes with 50, 100, 200, 500, 1000 topics, all changes

This topic: Motion > WebHome > WebChanges
Topic revision: 27 Oct 2010, KennethLavrsen
Copyright © 1999-2025 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Please do not email Kenneth for support questions (read why). Use the Support Requests page or join the Mailing List.
This website only use harmless session cookies. See Cookie Policy for details. By using this website you accept the use of these cookies.