(backlinks in Motion Web) MotionCenter < Motion

Backlinks to MotionCenter in Motion Web (Search all webs)

Results from Motion web retrieved at 21:19 (GMT)

Area Detect Feature Description of Patch This patch adds the ability to detect motion in predefined areas and execute an event immediately upon detection. The ev...

r11 - 09 Oct 2017 - 19:02 by RaC

BugReport2005x07x14x172735

BUG: I have my camera pointed at a busy street. I am seeing motion pictures posted in reverse order. For example, car enters scene is 02 20050714095026 00.jpg, c...

r13 - 29 Aug 2005 - 19:30 by KennethLavrsen

BugReport2006x08x07x052014

BUG: I am testing out motion 3.2.6 and I have encountered the following errors. On changing the width and height settings from 352 and 288 respectively to 640 an...

r4 - 03 Oct 2006 - 00:47 by AngelCarpintero

BugReport2006x09x07x113734

BUG: I've followed the recommendations of the Bug report and the fix, and my netcam capture is working much,much better (it can run for days), but still when it ...

r12 - 02 Mar 2009 - 16:25 by AngelCarpintero

BugReport2009x11x26x213556

BUG: I have a genius web cam that works fine with applications like cheese and xawtv bat it does not work in motion 3.2.11.1, am currently using ubuntu karmic wi...

r3 - 03 Jun 2012 - 01:53 by AngelCarpintero

BugReport2010x07x06x233747

BUG: motion does not seem able to read this which should be very similar to bktr0. cxm0 serves as both the tuner0 and the video0. cxm0 comes from the pvrxxx port...

NEW - 06 Jul 2010 - 23:55 by DarrenJohnston

BugReport2013x01x17x193723

BUG: When I configure Motion to run as a daemon, it dies soon after starting. I am running a headless Ubuntu server which is being used to transfer images to a...

r3 - 29 Jan 2013 - 22:09 by DazzConway

BugReport2014x04x30x234839

BUG: I ran valgrind on motion 3.2.12 using my config file (see below) and a foscam IR IP camera. There were several instances of memory leaks reported by valgrin...

NEW - 01 May 2014 - 00:32 by NicoleBruck

BugReport2014x09x12x111528

BUG: Hi, i have problem, dont work stream in motion from ip camera sip1601w (http://10.144.40.200). In run motion debug write "netcam_output_message: Invalid SO...

NEW - 12 Sep 2014 - 12:09 by AndrianAndrian

BugReport2015x11x05x002634

BUG: I have installed Motion on a new Raspberry Pi 2 with the latest "Jessie". I have never had any issues but now things are not working as they should be. With...

r2 - 22 Nov 2015 - 17:38 by MrDave

ConfigOptionAreaDetect

Areas are numbered like that: 1 2 3 4 5 6 7 8 9 One or more areas can be specified with this option. Example: You want to mon...

r8 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionFfmpegFilename

Default value is equivalent to legacy 'oldlayout' option For Motion 3.0 compatible mode (directories based on date and time) choose: %Y/%m/%d/%H%M%S File extensio...

r7 - 06 Aug 2016 - 21:43 by KennethLavrsen

ConfigOptionJpegFilename

Default value is equivalent to legacy 'oldlayout' option. For Motion 3.0 compatible mode (directories based on date and time) choose: %Y/%m/%d/%H/%M/%S %q This op...

r7 - 06 Aug 2016 - 22:35 by KennethLavrsen

ConfigOptionMovieFilename

File extension .mpg or .avi is automatically added so do not include this. This option uses conversion specifiers which are codes that start by % and then a lette...

r4 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionOnMovieEnd

Full path name of the program/script. This can be any type of program or script. Remember to set the execution bit in the ACL and if it is a script type program s...

r10 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionOnMovieStart

Full path name of the program/script. This can be any type of program or script. Remember to set the execution bit in the ACL and if it is a script type program s...

r7 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionOnPictureSave

Full path name of the program/script. This can be any type of program or script. Remember to set the execution bit in the file access control list (chmod) and if ...

r12 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionPictureFilename

This option uses conversion specifiers which are codes that start by % and then a letter. The conversion specifiers used has the same function as for the C functi...

r2 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionSnapshotFilename

Default value is equivalent to legacy 'oldlayout' option. For Motion 3.0 compatible mode (directories based on date and time) choose: %Y/%m/%d/%H/%M/%S snapshot F...

r6 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionSqlQuery

Most common conversion specifiers * %Y = year, %m = month, %d = date * %H = hour, %M = minute, %S = second * %v = event * %q = frame number * %t =...

r5 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTextLeft

text_left is displayed in the lower left corner of the pictures. If the option is not defined no text is displayed at this position. You can place the text in quo...

r11 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTextRight

text_right is displayed in the lower right corner of the pictures. If the option is not defined no text is displayed at this position. You can place the text in q...

r11 - 07 Aug 2016 - 20:19 by KennethLavrsen

ConfigOptionTimelapseFilename

Default value is equivalent to legacy 'oldlayout' option. File extension .mpg is automatically added so do not include this. This option uses conversion specifier...

r6 - 07 Aug 2016 - 20:19 by KennethLavrsen

FeatureRequest2010x01x04x212539

Feature Request: Description With Text Features from motion.conf we can show : ================= %v = event %q = frame number %t = thread (camera) number %D...

r2 - 07 Jan 2010 - 10:31 by AngelCarpintero

GenericTrackingPatch

Generic Tracking Patch Introduction Create a standard output from Motion which is easy to interface to for a program that controls a PTZ type camera. Descriptio...

r11 - 12 Nov 2008 - 14:58 by JonZeeff

MotionConfigSpanish

Spanish Version of motion dist.conf This topic is still in preparation # Renombrar este ejemplo a motion.conf # # Este archivo de configuración fué generado por m...

r8 - 05 Jun 2009 - 09:55 by DavidLosada

MotionPluginConfigFileSpecification

The Master Example Motion Config File The config file requirements * Format is plain text. Options are loaded with "option value". One option per line. ...

r6 - 09 Oct 2005 - 17:15 by KennethLavrsen

MotionRelease3x2x1snap17

Motion Snapshot Release 3.2.1_snap17 Release Notes 3.2.1 snap17 16 May 2005 Development Release not recommended for normal use The netcam code is still under...

r5 - 25 May 2005 - 01:44 by AngelCarpintero

ReleaseNoteMotion3x2x1

Release Note Motion 3.2.1 Main.KennethLavrsen 26 May 2005 Summary of changes since 3.1.19 Features * Control Interface: XMLRPC replaced by http interfa...

r6 - 26 May 2005 - 00:34 by KennethLavrsen

SupportQuestion2005x08x18x152208

Question I have a stock Fedora core 4 system, all packages are installed with yum. I installed motion 3.2.3 from the rpm available. I had everything working just ...

r4 - 19 Aug 2005 - 13:59 by KennethLavrsen

SupportQuestion2006x06x29x123708

Question I have six network cameras with a lot of custom written scripts (bash, php, awk) which build various http display pages showing motion events and snapsho...

r6 - 03 Jul 2006 - 14:59 by GregSwift

SupportQuestion2006x09x12x083959

Question I have a Logitech Quickam Express with driver spca5xx, because the pwc driver is not commpatible (I think). The webcam works correctly with camorama and ...

r4 - 07 May 2008 - 04:44 by AngelCarpintero

SupportQuestion2006x10x19x195002

Question I have a Logitech Sphere and a Pro4000, connect via USB as /dev/video1 and /dev/video2 When i only use one of them via motion.conf, everything works fine...

r3 - 05 Nov 2006 - 22:13 by KennethLavrsen

SupportQuestion2006x11x15x102522

Question I previously asked a question about 'getting all motion in one file' without using gap=0. I intend to make one file a day, and need the event numbers to ...

r4 - 24 Nov 2006 - 06:55 by KennethLavrsen

SupportQuestion2007x03x08x073048

Question Hello, We want to save a picture every five seconds, thus we put "snapshot_interval 5", but that does works, the webcam save pictures only when it detect...

r3 - 26 Jul 2007 - 06:41 by KennethLavrsen

SupportQuestion2007x05x27x131953

Question Most of the time I run motion I start it from the start a program menu in KDE. First its output is a black screen in port 8081. Then I restart it in port...

r9 - 07 May 2008 - 04:39 by AngelCarpintero

SupportQuestion2007x08x06x141715

Question Dear, we use motion with two independant card (device0, device1) wich have 4 canal (input0, 1, 2 3). When i plug all the camera, all on the second card ...

r3 - 16 Jun 2008 - 00:23 by AngelCarpintero

SupportQuestion2007x08x07x212845

Question Hi, I am trying to run motion with the following settings: "ffmpeg_cap_new on" "ffmpeg_video_codec msmpeg4" However I get the error listed below: 0 Pro...

r7 - 02 Feb 2008 - 06:23 by AngelCarpintero

SupportQuestion2007x12x29x175530

Question I have 3 IP camera axis,whit a opensuse 10.3 distribution i have configured motion with 3 thread files in daemon mode the 3 ip camera address is 192.16...

r9 - 06 Jan 2008 - 19:04 by AngelCarpintero

SupportQuestion2008x01x15x160852

Question Hi, i want to store pictures only. The Motion detect works perfectly. and the Jpg Files from motion detecting stored correctly. But the option Snapshot d...

r2 - 16 Jan 2008 - 13:30 by AngelCarpintero

SupportQuestion2008x06x11x183727

Question I'm having a problem encoding video from an Axis 211M at 1280 x 1024. The jpg's don't show any corruption but when it's encoded, green and block blocks s...

r5 - 13 Jun 2008 - 07:56 by AngelCarpintero

SupportQuestion2008x09x06x185013

Question I setup motion on a Slackware 10.2 system (kernel 2.4 with v4l). I installed from sources. I am using a flyvideo LR38 card. This card does not have a tun...

r3 - 09 Aug 2009 - 23:58 by AngelCarpintero

SupportQuestion2008x10x21x165451

Question We have configured motion to have ffmpeg encode video on the fly. When we encode to flv the motion of the videos is really fast. It looks like all the fr...

r6 - 28 Jan 2011 - 21:15 by FlorinAnton

SupportQuestion2008x11x09x151456

Question Hello, I've got quite a story regarding my problem. It started when i updated my distribution from Ubuntu 8.04 to Ubuntu 8.10 The ffmpeg version was upda...

r12 - 17 Nov 2008 - 10:11 by AngelCarpintero

SupportQuestion2008x11x29x173230

Question Hello, I currently have motion set up to not detect motion, but to save a snapshot from the webcam every 60 seconds... and my problem is that this webcam...

r2 - 29 Nov 2008 - 20:12 by AngelCarpintero

SupportQuestion2009x04x30x053208

Question I installed 9.04 on a desktop (clean install on a different Hard Drive) that had been running motion quite nicely. The webcam worked and I had it set up ...

r3 - 12 Jul 2009 - 09:56 by AngelCarpintero

SupportQuestion2009x06x13x161505

Question When I try to start motion with a custom config file, I always get the following output. The webcam is a Sepia model, lsusb identifies it as "ID 093a:260...

r3 - 09 Jul 2009 - 07:46 by AngelCarpintero

SupportQuestion2009x08x04x191406

Question I have two cameras "Sirius USB2.0 Camera" and don't work together, when I run 'Motion' only works once, and the other I get a gray image. I compile the l...

r9 - 05 Aug 2009 - 18:35 by AngelCarpintero

SupportQuestion2009x09x17x155331

Question hello ! Motion work fine ! The pictures captured in my directory are in right color , my avi too ! but on myIp:8081, the pictures are in black, blue and ...

r2 - 21 Sep 2009 - 09:49 by AngelCarpintero

SupportQuestion2009x09x22x212331

Question My camera puts out about 3 4 fps with this enabled. With it off I get around 10fps. How can I disable it, or get more fps out of my camera? # Rename this...

r3 - 29 Jul 2010 - 16:00 by YannickDrolet

SupportQuestion2009x10x15x234431

Question Ever since netcam_tolerant_check was added to motion, I have had trouble with partial frames showing up in the movies that motion creates. Prior to the r...

r3 - 24 Mar 2010 - 16:41 by AngelCarpintero

SupportQuestion2009x12x08x213254

Question I NEED HELP, xawtv working and zoneminder fault! :( zmu d /dev/video3 q v Uadmin Ppassword Error, failed to query video capabilities /dev/video3: I...

r3 - 09 Dec 2009 - 21:37 by DarkPhoinix

SupportQuestion2010x04x27x214314

Question Hi, I get "Unable to open video device." I am using few IP cameras Aviosys 9060AK http://www.aviosys.com/ip9060akplus.htm i tried: trunk version 511 ...

r5 - 18 Jan 2011 - 20:39 by PavelM345

SupportQuestion2010x05x30x102540

Question I am trying motion on beagleboard. For that, I am using rootfs built on Ubuntu Lucid. All the drivers, libraries and motion is properly installed there. ...

r4 - 02 Jun 2010 - 19:30 by AngelCarpintero

SupportQuestion2010x06x24x214932

Question When starting motion the resolution is being dropped from VGA to 176x144. I've read some other bug reports/mailing list entries where this problem is usu...

r4 - 21 Jan 2013 - 21:13 by DazzConway

SupportQuestion2010x07x13x180133

Question Hello, I have problem with motion. In my videos moving objects are transparent. # Rename this distribution example file to motion.conf## This config file...

r3 - 27 Jul 2010 - 19:57 by JokubasJokubas

SupportQuestion2010x09x04x075459

Question I have a Logitech Quickcam Express ID 0870 (an older but common model). The auto exposure feature does not work with motion. It does work with Cheese and...

r2 - 05 Sep 2010 - 08:14 by DazzConway

SupportQuestion2010x11x28x080111

Question Hi, I'm searching the requests and answers, the FAQ and the online documentation but somehow I could use some help achieving my goal. I'm running Motion ...

r3 - 01 Dec 2010 - 20:12 by BenZandstra

SupportQuestion2010x12x13x120535

Question Hallo, i have read the manuals and i have seen in the supportet devicelist that the DLInk DCS 5230 worked how the DCS 2102. netcam_url http://xx.xx.xx.xx...

NEW - 13 Dec 2010 - 12:18 by UweHeidrich

SupportQuestion2011x02x22x214119

Question Hi, I'm getting this error every time I try to start motion: ioctl(VIDIOCGMBUF) Error device does not support memory map Could someone help me? Please,...

r2 - 23 Feb 2011 - 21:24 by AngelCarpintero

SupportQuestion2011x08x31x180315

Question Hello, I'm fairly new to Linux and I have been trying to figure this problem out for the past 8 hours but it seems to me that there's no solution availab...

NEW - 31 Aug 2011 - 18:14 by ChesterLou

SupportQuestion2011x09x28x221731

Question HI, I have a problem with Grandtech ip cam, motion report this write fededz@ZETASERVER:~$ motion 0 Processing thread 0 config file /etc/motion/motion...

NEW - 28 Sep 2011 - 22:34 by FedericoDalZotto

SupportQuestion2011x11x18x090943

Question Hi, I get this error after a few seconds (30s) of running motion: uvcvideo: Failed to resubmit video URB ( 27) I have another problem.. the videos only h...

r2 - 22 Nov 2011 - 09:12 by AngelCarpintero

SupportQuestion2012x02x03x194234

Question Hi, except the non detected USB Webcam related here below the double line (because I just discovered the Backfire 10.03.1 OpenWRT router firmware does no...

r6 - 23 Apr 2014 - 10:23 by DavidWales

SupportQuestion2012x04x03x081730

Question Ask your question. If you want to paste error output text or similar text where new lines must be preserved, paste it in the field below. Hello, how to c...

NEW - 03 Apr 2012 - 08:23 by AppoloAppolosov

SupportQuestion2012x05x06x200246

Question I have 6 cameras that each send their files to a specific folder on the PC running Linux and Motion created for each individual webcam (thread). The file...

NEW - 06 May 2012 - 20:30 by RockyCJC

SupportQuestion2012x05x12x131356

Question i have motion setup and running. i can view the live stream from browser at localhost:8081. I don't know how to view from a remote computer i.e. my nokia...

r3 - 02 Jun 2012 - 02:50 by AngelCarpintero

SupportQuestion2012x07x20x193051

Question Hello, I have problem with images when is set resolution greater then 352x288 i get images like: https://docs.google.com/open?id=0BwbG 9oHMHNFNXZ5Yi0weDJ...

r2 - 21 Jul 2012 - 07:37 by VaclavKeberdle

SupportQuestion2012x08x02x222631

Question Greetings How can I get the HTTP server to serve at more than 1 frame per second? I am trying to use Motion only as a streaming webcam server on my LAN. ...

NEW - 02 Aug 2012 - 22:58 by JoelLieberman

SupportQuestion2012x08x15x141341

Question motion is spawning multiple instances of it's self to point that system runs out of memory. # /etc/motion/motion.conf # # This config file was generated ...

NEW - 15 Aug 2012 - 14:22 by DaleWilcox

SupportQuestion2012x09x15x165730

Question Hi, I just setup motion. Everything is alright; all live image can be saved. However, when I open the link http://myserver:8081, I can only see the mask ...

NEW - 15 Sep 2012 - 17:07 by GaryNg

SupportQuestion2012x11x10x192608

Question Hi, I successfully installed Motion on my OpenWRT (last version named Attitude Adjustment linux OS) router. I still did not installed ffmpeg due to a l...

NEW - 10 Nov 2012 - 19:42 by MiguiPda

SupportQuestion2013x01x13x215153

Question When enabling mini http server and tuning in to the webcam, I am only able to see the moving objects. As when output_motion is enabled for pictures. I ma...

NEW - 13 Jan 2013 - 22:07 by MichaelAndersen

SupportQuestion2013x01x20x102311

Question Dear Sir, I have installed motion on Ubuntu 12.10 workstation from the ubuntu repository which resulted in motion version 3.2.12. I want to use this in c...

r4 - 21 Jan 2013 - 19:22 by AadSlingerland

SupportQuestion2013x02x14x002647

Question Hello I am having trouble applying a mask image to my network camera feeds. I have created for simplicity a simple mask file (all white) in 640x480 (both...

r3 - 25 Jan 2014 - 06:08 by MontyAu

SupportQuestion2013x03x20x193058

Question Hi, If I am viewin timelapse movies from this 1280 * 720 IP camera with Avidemux they moslty give an error: "Could not open the file". Error is: Mpeg f...

NEW - 20 Mar 2013 - 20:05 by BenZandstra

SupportQuestion2013x04x28x135157

Question I have notice that the video recording start 1 min after motion has detected. I wanted it to start recording right after motion has detected. I couldn't ...

NEW - 28 Apr 2013 - 14:04 by YimengNiu

SupportQuestion2013x07x04x143337

Question I'm trying to run a script that will execute a bash script when motion is detected. This is the default code: #Command to be executed when a motion frame...

NEW - 04 Jul 2013 - 14:52 by TyY

SupportQuestion2013x10x30x180816

Question I am able to successfully run Motion with a Phillips webcam and detect motion, capturing a series of event related JPEGs. However, when I set up Motion ...

r2 - 31 Oct 2013 - 02:48 by WillStewart

SupportQuestion2013x11x26x022954

Question how do i can delete file.avi and file.jpeg after a week record file? error message root@server:/etc/motion# motion 0 Processing thread 0 config file...

r2 - 28 Nov 2013 - 01:50 by AmriAm

SupportQuestion2014x02x02x084320

Question I have a NoIR camera board connected to a Raspberry pi, and am using it to 1) store video files and 2) provide a live feed to the web. It works well duri...

NEW - 02 Feb 2014 - 09:16 by ReggieNoo

SupportQuestion2014x02x04x155739

Question First of all I'd like to thank everyone who's even reading this. I've been working on a video monitoring/recording for my house for a while now, using a ...

NEW - 04 Feb 2014 - 19:27 by GustavoCampos

SupportQuestion2014x02x26x213359

Question I have setup motion with two types of video capture devices. One type are USB cameras and the second are old phones sitting on their own URL. Both device...

r2 - 28 Feb 2014 - 00:46 by AngelCarpintero

SupportQuestion2014x03x27x152142

Question Hello! I have a problem with taking snapshots from a webcam with motion. If I take a snapshot with an interval of less than 10s, the snapshot gets taken ...

NEW - 27 Mar 2014 - 15:38 by EnzoBrands

SupportQuestion2014x04x16x172912

Question This was resolved...I forgot the c option for the config and the default value was for pal and I am using NTSC This works great and I got it going quick...

NEW - 16 Apr 2014 - 18:59 by GlennTelleed

SupportQuestion2014x04x21x165916

Question Hello ! Is it possible do disable the movement detection but keep the other features like the streaming ? I'm using Motion on a Raspberry Pi PiCamera a...

r4 - 26 Sep 2014 - 18:56 by TosiaraT

SupportQuestion2014x09x14x141506

Question I've gone through a number of set up help sites, and no matter what I do, I can't get Motion to save any type of movie file. I'm trying to save to avi, b...

r2 - 26 Sep 2014 - 18:03 by TosiaraT

SupportQuestion2015x04x22x174829

Question How to solve green only image? Camera is a Wanscam a foscam clone I believe. First camera thread working fine. Second green image. 2 End of camera conn...

NEW - 22 Apr 2015 - 18:51 by JamesRoots

SupportQuestion2015x06x08x172246

Question My logitech C270 webcam will only work with the default width=320, height=240. When I change to 640x480, I get a segmentation fault. I have tried multipl...

NEW - 08 Jun 2015 - 17:43 by LinuxLearner

SupportQuestion2016x01x05x175049

Question My project is Automatic License Plate Recognition (OpenALPR) to open a gate. I've a Raspberry Pi 2 with integrated cam. So far I managed to install Raspi...

NEW - 06 Jan 2016 - 19:51 by RaymondWarichet

SupportQuestion2016x01x14x020240

Question I got the server running and everything seems well, but i've got some strange color problem with my webcam. At the beggining I had two problems: 1. I had...

r2 - 08 Feb 2016 - 10:27 by IaMalcolm

SupportQuestion2016x02x24x175519

Question My motion videos pause every second instead of playing smoothly. On a previous install of motion (3.2.12), I did not have this issue. My motion video cap...

NEW - 24 Feb 2016 - 18:09 by JewbixCube

SupportQuestion2016x10x01x180650

Question I have a problem to run motion with logitech c270. I've got 2 errors in logfile: mjpegtoyuv420p: Corrupt image ... continue and Device doesn't support VI...

NEW - 01 Oct 2016 - 18:22 by GenaBaklofen

SupportQuestion2017x01x25x185146

Question Hi, First thanks for your app, it's very performant and customizable! My problem is that the video produced after a motion detection is not "correct". I ...

NEW - 25 Jan 2017 - 19:07 by FloD

Number of topics: 94

Copyright © 1999-2025 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Please do not email Kenneth for support questions (read why). Use the Support Requests page or join the Mailing List.
This website only use harmless session cookies. See Cookie Policy for details. By using this website you accept the use of these cookies.