Motion - Web Changes

You are here: Foswiki>Motion Web>WebChanges (27 Oct 2010, KennethLavrsen)Edit Attach

500 recent changes in Motion Web retrieved at 02:47 (GMT)

FeatureRequest2005x12x24x200321

Feature Request: Description Is it possible to make motion recognize an external signal (similar to SIGUSR1) that will make it capture a configurable number of ...

r3 - 30 May 2006 - 09:55 by MikeMullins

SupportQuestion2006x05x27x123932

Question Thanks for your reply to question 2006x05x23x092215. Sorry to bother you again, I can't get the nph mjprox to work. In your applet snippet, you state cam...

r2 - 27 May 2006 - 16:43 by KennethLavrsen

CreateBugReport

#SubmitNewBug Submit New Bug Report This form starts a new topic for each bug. * Consider filing a Support Request unless you are very sure you have found a...

r12 - 26 May 2006 - 13:53 by KennethLavrsen

ExecProxyPatch

exec_proxy Description of Patch A hack to allow you to specify an external program that will function as the source for a MJPEG video stream. This is useful for ...

r10 - 25 May 2006 - 10:12 by KennethLavrsen

BugReport2006x05x24x003214

BUG: Using motion with a Creative Video Blaster WebCam II on parport (cpia driver) takes 50/90% of cpu on smp bi 1.6GHz. Same config works fine with qc usb drive...

r3 - 24 May 2006 - 09:16 by JeromeV

FeatureRequest2005x12x11x010729

Feature Request: Description consider support of as a replacement for current motion detection scheme: Gandalf Library http://gandalf library.sourceforge.net/ G...

r4 - 24 May 2006 - 06:25 by KennethLavrsen

BugReport2006x05x23x092100

BUG: I've also observed that autobrightness blinks. But when autobrightness is off and I change bright, saturation or hue, screen goes white too. Then, if I cha...

r3 - 24 May 2006 - 06:20 by KennethLavrsen

BugReport2006x03x04x110846

BUG: Recently, i posted bug that threads crash one after the other. I have resolved the problem by running separaly motion instance for each camera without any p...

r3 - 24 May 2006 - 06:13 by KennethLavrsen

SupportQuestion2006x05x23x092215

Question I use motion with three simultaneous bttv cams with three threads. I'd like to stream one of them at any one time on the same port, say 8080. Initial web...

r2 - 23 May 2006 - 23:15 by KennethLavrsen

SupportQuestion2006x05x23x081859

Question Currently there are two types of masks in motion. A "fixed mask" and an internal "smart mask". In the sections "smart_mask_speed" and "mask_file" in the ...

r2 - 23 May 2006 - 23:00 by KennethLavrsen

BugReport2005x11x22x172816

BUG: im running motion on kernel 2.4 debian box. the old version worked ok. with the new version the webcam interface disappears after 24 48 hours usually after ...

r11 - 22 May 2006 - 18:31 by PeterS

BugReport2006x05x16x085444

BUG: Hello I'm using motion 3.2.6 with an Axis 240Q video server and 4 analog cameras over a Wireless link. Everything seems to work fine, but after some hours (...

r2 - 16 May 2006 - 21:54 by AngelCarpintero

SupportEditTemplate

%NOP{ * Note: Do not edit this topic, ask a question in WebHome * Set ALLOWTOPICCHANGE = Main.TWikiAdminGroup }% Question Environment Motion version: ...

r8 - 13 May 2006 - 23:28 by KennethLavrsen

SupportQuestion2006x05x13x092955

Question when i started motion ,, following error appeared fyc@fyc:/dev$ motion 0 Processing thread 0 config file /usr/local/etc/motion.conf 0 Motion runnin...

r2 - 13 May 2006 - 10:29 by KennethLavrsen

LoggingFfmpegFix

Logging Ffmpeg Fix Description of Patch This patch will fix some erroneous log messages which may be emitted by the Ffmpeg handling code. There are some log ent...

r2 - 10 May 2006 - 00:56 by KennethLavrsen

MotionRss

MotionRss Introduction Creates RSS feed of the contents of your movies directory. Detailed Description Whenever a new movie is recorded, the RSS feed will be up...

NEW - 09 May 2006 - 09:48 by FlorianBeer

KedMotionTools

KED's Motion Tools Introduction A few tools made for my own motion usage but maybe other can make use of it or get some inspiration. I'll start with three tools...

r3 - 01 May 2006 - 11:23 by TheOtherBug

MotionClient

Software that allows you to view the motion Web streams (live video) from the cameras connected to your motion server using the MS windows platform Introduction ...

r4 - 01 May 2006 - 06:21 by KennethLavrsen

FeatureRequest2006x04x30x214936

Feature Request: Description Change Log? It would be nice to be able to see the changelog here on the wiki, a link to CVS would be fine. It takes a lot of effor...

r2 - 01 May 2006 - 06:20 by KennethLavrsen

FeatureRequest2006x04x23x101111

Feature Request: Description hej : ) motion is a suuper great program : ) but i'm searching a tool to locate a motion and get the coordinations of this detected...

r3 - 27 Apr 2006 - 06:12 by AngelCarpintero

FeatureRequest2006x04x19x082734

Feature Request: Description The present autobrightness function (in v4l_picture_controls) merely changes the device brightness to ensure that the average pixel...

r3 - 25 Apr 2006 - 15:50 by MikeScott

FeatureRequest2006x04x20x104836

Feature Request: Description I'm running a Logitech 4000 at 640x480 on a PII 450. Works really well at 5fps until night time, when I need to use despeckle to ge...

NEW - 20 Apr 2006 - 10:53 by MarkTranchant

SupportQuestion2006x04x10x163136

Question I have an Axis network camera monitoring a small street. However, there is a small piece of a busy street visible, which I want to mask out. I made a mas...

r7 - 17 Apr 2006 - 19:53 by AngelCarpintero

BugReport2006x03x19x124345

BUG: I havent't modified a single element of my system in the last hours days(updated the wxwidget two days ago) and running motion for 11 days straight uninterr...

r2 - 16 Apr 2006 - 07:50 by KennethLavrsen

SupportQuestion2006x04x14x233058

Question I have experimented with the control_localhost (on/off) settings with the following results: CASE 1 (all other motion.conf settings remain at default val...

r2 - 15 Apr 2006 - 08:41 by KennethLavrsen

BugReport2006x04x14x093732

BUG: I am using 2 cameras connected to 1 Video Capture Device with 4 inputs (/dev/video0). I have 2 thread.conf files and 1 motion.conf. They are configured corr...

r2 - 14 Apr 2006 - 12:58 by KennethLavrsen

MpegFilmsFFmpeg

Generating MPEG films with ffmpeg The ffmpeg option can generate mpeg films very fast and "on the fly". This means that the mpeg film is growing each time motion ...

r7 - 14 Apr 2006 - 03:51 by PeterKim

FeatureRequest2006x04x08x080625

Feature Request: Description I would like to have the option of starting motion with a detection delay so i can leave home without getting myself detected like ...

r4 - 12 Apr 2006 - 19:51 by KennethLavrsen

FeatureRequest2005x03x31x225825

Feature Request: Description See my answer on SupportQuestion2005x01x03x114817 See also discussion topic MotionWatchdog. Main.KennethLavrsen 31 Mar 2005 Fo...

r5 - 05 Apr 2006 - 20:41 by MichaelHarris

BugReport2006x04x02x150440

BUG: Having both noise_level and noise_tune set, motion will not try to record jpeg images to disk. Test case Following settings are used as an example. noise_t...

r3 - 05 Apr 2006 - 14:32 by AngelCarpintero

FeatureRequest2006x04x03x223638

Feature Request: Description If you have somewhat unimportant stuff happening in a far away area but close up (like near a window) you want to capture more info...

NEW - 03 Apr 2006 - 23:13 by TWikiGuest

FeatureRequest2005x04x21x052017

Feature Request: was titled: "no motion detectet since xy sec" but since the main feature was rejected I decided to change the title for the part that has been a...

r5 - 03 Apr 2006 - 22:48 by TWikiGuest

FeatureRequest2006x04x03x122941

Feature Request: Description In addition to an event, an event frame parameter could be implemented. This will function similiarly to %q which uniquely identifi...

NEW - 03 Apr 2006 - 14:27 by JoeBush

PwcConfiguration

Small patch adding pwc configuration options Description of Patch The patch adds 3 configuration options to control the behavior of the pwc tracking code. Our Lo...

r7 - 02 Apr 2006 - 17:39 by JoeBush

FeatureRequest2006x03x16x095713

Feature Request: Description Another little thing: I would like to see some indiction on the cam picture of detection being in pause state. My first suggestio...

r2 - 16 Mar 2006 - 17:54 by KennethLavrsen

VIAEzraC3Patch

Fix for VIA Ezra C3 CPUs Description of Patch Neither Motion 3.2.4 nor the daily build would run on my VIA Ezra 10000 CPU. It killed as as soon as it attempted ...

r6 - 15 Mar 2006 - 00:43 by KennethLavrsen

MotionffmpegDeinterlace

Deinterlace video input Description of Patch Motion will deinterlace frame before put them to file Installation of Patch Download the patch file. If it is packe...

r8 - 15 Mar 2006 - 00:43 by KennethLavrsen

FixTypoInComments

FixTypos Description of Patch This patch fix many typos in comments ( i ran aspell against the code ). Also there's a fix to free cnt eventtime_tm when motion e...

r4 - 15 Mar 2006 - 00:42 by KennethLavrsen

FixStringsAndDisableLabeling

disable labeling and fix strings from http Description of Patch The patch fix the management of strings from http remote control , setting to NULL when they are...

r3 - 15 Mar 2006 - 00:42 by KennethLavrsen

ReleaseNoteMotion3x2x5

Motion Release Release Notes Motion release 07 Mar 2005 Summary of changes since 3.2.4 3.2.5.1 is the exact same code as 3.2.5 but with manpage and Motion...

r5 - 14 Mar 2006 - 17:39 by TheOtherBug

BugReport2006x03x11x162137

BUG: I tried your 3.2.5.1 and still have problem of the timing of the snapshots. Comparing the "fix" you inserted to motion.c with the "proposed" fix I gave in o...

r3 - 12 Mar 2006 - 18:12 by GregSwift

SupportQuestion2006x03x11x212019

Question I know this is the wrong place to post this question, but I was not sure of where the correct place was. Many people, including Kenneth Lavrsen, have suc...

r2 - 12 Mar 2006 - 00:39 by KennethLavrsen

SupportQuestion2006x03x11x141352

Question when trying to compile i've got this message, could someone point me ? TIA Compiling Motion object files... gcc g O2 DHAVE_MYSQL I /usr/include/mysq...

r2 - 12 Mar 2006 - 00:24 by KennethLavrsen

BugReport2006x02x07x162149

BUG: I have six network cameras (DCS 900) with the snapshot interval set to 60 seconds. That should therefore be 360 snapshots per hour. Motion fails to take a s...

r4 - 12 Mar 2006 - 00:23 by KennethLavrsen

SupportQuestion2006x03x02x152208

Question Hi I have the same problem that was seen in http://www.lavrsen.dk/twiki/bin/view/Motion/BugReport2005x08x02x070017 and i have been taking a look in the m...

r8 - 05 Mar 2006 - 20:30 by AngelCarpintero

SupportQuestion2006x01x30x191510

Question Small and cheap netcam market intellinet or edimax ic 1000 in compatibility. I found a small piece of tcl code (http://gem.win.co.nz/mb/misc/edicam/) whi...

r3 - 02 Mar 2006 - 07:24 by AngelCarpintero

SupportQuestion2006x01x03x071110

Question Hello, I would like to adapt Motion's motion tracking features for a stepper motor project I'm working on. I would appreciate clarification on some of t...

r2 - 02 Mar 2006 - 07:22 by AngelCarpintero

SupportQuestion2005x12x09x000832

Question I'm using a Quickcam VC as well as a Quickcam Messenger. The VC, which is black and white, works fine in gqcam through the v4l interface, but in motion t...

r3 - 02 Mar 2006 - 06:53 by AngelCarpintero

SupportQuestion2005x09x27x201828

Question Hello Kenneth I tried 3.2.4.snap2 as you recommended but the problem still remains. With switchfilter on no one motion is detected. motion version moti...

r8 - 02 Mar 2006 - 06:52 by AngelCarpintero

BugReport2006x02x23x163414

BUG: when get diskfull and motion try to save image os mpeg motion crash and exit without messages, maybe insert syslog messages and stop write, when diskspace g...

r2 - 28 Feb 2006 - 23:29 by AngelCarpintero

BugReport2006x02x28x192111

BUG: See support question SupportQuestion2006x02x24x095024 webcam_localhost setting in config file is ignored. Seen to be set to "off" in web interface even whe...

r2 - 28 Feb 2006 - 23:08 by AngelCarpintero

FeatureRequest2006x02x24x101604

Feature Request: Description I have the notion that it would be useful if the web server was able to multiplex the pictures from several cams for say 1 or 2 s...

r2 - 27 Feb 2006 - 19:55 by AngelCarpintero

SupportQuestion2006x02x24x113246

Question The %t (thread number) conversion specifier doesn't work in text_left or text_right. Was this introduced in 3.2.4 or have I discovered something earth s...

r2 - 27 Feb 2006 - 19:52 by AngelCarpintero

SupportQuestion2006x02x24x095024

Question I've got 3 cams webcam_localhost is specifically set to 'off' in 2 of the 3 threads and specifically set to 'on' in the third. It is not set at all in m...

r2 - 27 Feb 2006 - 19:49 by AngelCarpintero

BugReport2006x02x23x185553

BUG: Hi! I work with motion 3.2.3. According to the motion guide, the option %f specifies the full path name. Unfortunately, it does not replace it but only uses...

r2 - 24 Feb 2006 - 08:15 by KennethLavrsen

MotionHttpControl

HTTP Interface for Motion Introduction This document is a first proposal and not at all complete for a http interface to control motion , it will replace xmlrpc...

r91 - 22 Feb 2006 - 09:06 by KennethLavrsen

BugReport2005x12x21x110709

BUG: When using pan/tilt on web control port (directly or via control204pt.php script) motion crashes with no output generated Test case 3.2.4 1 installed from ...

r3 - 21 Feb 2006 - 08:44 by KennethLavrsen

BugReport2006x01x26x153153

BUG: I use a BT878 Card with 4 Composite. The Card is running and i can use every channel in motion.conf. If i use thread1.conf and thread2.conf for two Cameras,...

r3 - 21 Feb 2006 - 01:52 by KennethLavrsen

SupportQuestion2006x02x13x145236

Question I have six network cameras with the global config option set: snapshot_interval 60 I currently control which ones are doing motion detection using the we...

r2 - 14 Feb 2006 - 03:46 by AngelCarpintero

SupportQuestion2006x02x07x165228

Question Hello. I'm using the Ubuntu Breezy standard version of motion, which is 3.2.3. Everything appears to work fine with the default config (which does not sa...

r3 - 10 Feb 2006 - 18:04 by KennethLavrsen

SimpleSunriseSunsetScript

Quite simply, starts and stops motion based on sunrise and sunset Introduction This is a simple script using Sunwait (Dan Risacher) What does it do? Starts moti...

NEW - 10 Feb 2006 - 15:19 by JimLimmer

FeatureRequest2006x01x09x142543

Feature Request: Description There's a nice program for win32 called Dorgem (dorgem.sf.net) which has a nice feature to serve JPEG on dedicated port, not multip...

r2 - 10 Feb 2006 - 14:15 by AngelCarpintero

MotionCamViewerToy

(Motion Cam Viewer for Windows) /motioncamviewertoy.jpg What is it ? A piece of software that allows you to view the mjpeg streams (live video) from the c...

r17 - 10 Feb 2006 - 09:56 by NikoMsj

BugReport2004x12x20x085650

BUG: The file motion_guide.html contains picture with a link to the motion web site. In this case to see the pictures if is necessary to have an internet connect...

r5 - 05 Feb 2006 - 16:38 by KennethLavrsen

MotionGuide3x1x17

Legacy Motion Guide for Motion version 3.1.17 This is the version of the Motion Guide that matches release 3.1.17 of Motion. It is a snapshot of how the Guide loo...

r2 - 04 Feb 2006 - 17:27 by KennethLavrsen

FeatureRequest2006x02x03x145349

Feature Request: Description Hi all, I'd like to know if it is possible to implement motion detection that compare a static jpeg image instead of the previous c...

NEW - 03 Feb 2006 - 14:56 by AlfredoMarchini

VideoPaletteConfigOptionPatch

VideoPaletteConfigOptionPatch Introduction I receieved this patch via email from a Russian user. Description of Patch From original email. I have ivc 200 captur...

r7 - 03 Feb 2006 - 14:15 by TWikiGuest

FeatureRequest2006x01x12x192350

Feature Request: Description Hi, Im using your software for monitoring our parking place and according to the count of people, who always cause start of saving ...

r3 - 03 Feb 2006 - 00:44 by KennethLavrsen

SupportQuestion2006x01x25x155240

Question I just upgraded to 3.2.4, because for some reason my old version wasn't loading more than 2 thread files, and I had just added a 2nd Axis 210 camera. Now...

r6 - 01 Feb 2006 - 20:12 by RossReed

ShowCgiShellScript

show cgi Author: Main.JeroenVreeken Submitted by. Main.KennethLavrsen A simple web interface for showing captured images. Depends on the chosen filename format in...

r2 - 31 Jan 2006 - 20:58 by JimLimmer

FeatureRequest2006x01x14x111053

Feature Request: Description I've never contributed to an open source project before and would like to add to this one. I've added a feature that allows you to...

r2 - 29 Jan 2006 - 05:45 by KennethLavrsen

BugReport2006x01x26x180056

BUG: I have 6 DCS 900 network cameras. Several times per day, a few of them (not all at the same time) decide to return a completely black image (unknown why, ca...

r5 - 29 Jan 2006 - 05:39 by KennethLavrsen

SupportQuestion2006x01x09x202952

Question I have 6 DCS 900 network cameras. Several times per day, a few of them (not all at the same time) decide to return a completely black image (unknown why...

r2 - 26 Jan 2006 - 21:21 by KennethLavrsen

SupportQuestion2006x01x10x075037

Question hello, I want change the square of detection (in screen) in other form for example : a cross is it possible? Thanks for your answer Environment Motio...

r3 - 16 Jan 2006 - 00:23 by KennethLavrsen

FeatureRequest2006x01x14x174924

Feature Request: Description If I watch a complete dir of movies with mplayer, there's no hint on what date/time the actual movie was shot. It would be nice, if...

r3 - 15 Jan 2006 - 11:47 by KennethLavrsen

MotionEventMailer

Motion Event Mailer in PHP Introduction Simple Php which compresses and mails event pictures at the end of an event Tired of logging onto your website to see wha...

r6 - 14 Jan 2006 - 08:50 by AngelCarpintero

BugReport2005x12x19x213255

BUG: Running Motion 3.2.4 with a single camera, an Axis 206M, with its maximum view size of 1280x1024. I think this is a reincarnation of my older, rejected bug ...

r13 - 02 Jan 2006 - 17:34 by PeterS

MotionSourceTree

Motion Source Tree Take a sneak preview of the current Motion sources. What is Kenneth up to? Beware this code is often incomplete or broken.

r2 - 30 Dec 2005 - 17:17 by KennethLavrsen

SupportQuestion2005x01x03x114817

Question motion 3.1.17 on kernel 2.4.21 243 I'm using a logitech quickcam, using the module quickcam, however this can be applied to any video devices i'm using (...

r6 - 29 Dec 2005 - 15:17 by KennethLavrsen

RemoteControlHttp

Remote Control with http Motion can be remote controlled via a simple http interface. http is the language a normal web browser talks when it requests a web page....

r7 - 21 Dec 2005 - 22:46 by KennethLavrsen

UsbvisionDriverPatchFourInputs

usbvision driver patch for 4 inputs USB 1.x capture device Introduction Using this patch for the usbvision driver provides the full functionality in motion for t...

r3 - 21 Dec 2005 - 22:14 by KennethLavrsen

DailyFileStoreScript

Daily File Store Shell Script Introduction Simple shell scripts that store pictures into folders every day and clean it up later on if you wish. Detailed Descr...

r2 - 21 Dec 2005 - 22:14 by KennethLavrsen

ShellKeepAliveScript

Shell Keep Alive Script Introduction Simple shell script called from cron that checks and keeps motion running. Detailed Description In my setup I call this scr...

r2 - 21 Dec 2005 - 22:13 by KennethLavrsen

ConversionSpecifiers

Conversion Specifiers for Advanced Filename and Text Features The table below shows all the supported Conversion Specifiers you can use in the options text_event,...

r10 - 21 Dec 2005 - 22:05 by KennethLavrsen

SupportQuestion2005x12x21x014647

Question I'd like to know if it is possible to use the parallel port rather than using the serial one, to control a stepper motor. The circuit is simple, just a p...

r2 - 21 Dec 2005 - 22:04 by KennethLavrsen

WebhttpEnhancements

Patches to enhance webhttpd Description of Patch boolselect.diff I wanted to have a selectbox instead of a textfield for changing boolean configs Installation o...

r12 - 20 Dec 2005 - 22:12 by KennethLavrsen

ThreadNrTlsPatch

Threadnr in TLS patch Introduction The last days or so, we discussed TLS on IRC (sorry, logger was down so no reference to the discussion). Basically, TLS (threa...

r9 - 20 Dec 2005 - 22:12 by KennethLavrsen

ThreadConversionSpecifierPatch

Implements the %t as conv spec for thread number Description of Patch See %t in ExtendReplaceConversionSpecifiersDiscussion added by Main.KennethLavrsen for Ange...

r4 - 20 Dec 2005 - 22:11 by KennethLavrsen

SQLEventLogging

SQL Event Logging Introduction This patch adds an extra field to the SQL database when entries added. The field is called 'event_time_stamp' and is the time stam...

r7 - 20 Dec 2005 - 22:11 by KennethLavrsen

RotateSimplificationPatch

Simplication of the Rotate Feature Description of Patch As of Motion 3.2.4 snap1, there is a check that the input image dimensions (both width and height) are ev...

r4 - 20 Dec 2005 - 22:11 by KennethLavrsen

ReduceWarningsPatch

A patch for lesser warnings when compiled with with developer flags Description of Patch This patch is a follow up to the new with developer flags option for c...

r9 - 20 Dec 2005 - 22:10 by KennethLavrsen

NetcamWithFtpEnhancements

Netcam With Ftp Enhancements Asbjørn Pettersen sent to mailing list some comments about the NetcamWithFTP patch. Descripton of Patch Here there's a patch tha...

r4 - 20 Dec 2005 - 22:10 by KennethLavrsen

NetcamWithFTP

Add capability to connect to FTP server as well as HTTP server Description of Patch At least one netcam (the Dlink 2000) does not allow fetching an image with th...

r8 - 20 Dec 2005 - 22:10 by KennethLavrsen

NetcamFixPthreadInit

Fix Initialisation of Pthread Structures Description of Patch The released Netcam code should do some of it's initialisation at an earlier point within the code....

r6 - 20 Dec 2005 - 22:09 by KennethLavrsen

NetcamFixPixordBug

Enhancement to Netcam Code for Connection to Pixord Cameras Description of Patch This patch fixes a bug in the netcam code, which can cause a segfault, when a Pi...

r6 - 20 Dec 2005 - 22:09 by KennethLavrsen

DrawTextspeedup

improvement of draw_textn Description of Patch I played a little bit with draw_textn and optimized it. Now instead of array's, with many calculation inside, i'm ...

r6 - 20 Dec 2005 - 22:09 by KennethLavrsen

BetterFFmpegDetection

enhanced ffmpeg detection Description of Patch This patch tries to enhance the detection of ffmpeg libraries and headers in configure.in . Installation of Patch...

r5 - 20 Dec 2005 - 22:08 by KennethLavrsen

FeatureRequest2005x12x01x130934

Feature Request: Description Hi I know that this have nothing to do with the main use of motion but as it is close to have the feature anyway i wish for this: I...

r3 - 20 Dec 2005 - 02:26 by TWikiGuest

MacOSXPatch

MacOSX Port ( Already included in motion 3.2.4 ) Introduction MacOSX is based in FreeBSD 5.0 , so it's not hard to do a port of motion using the existing FreeBSD...

r8 - 19 Dec 2005 - 08:42 by AngelCarpintero

FeatureRequest2005x10x21x025159

Feature Request: Description Either through the "HTTP Based Control" or via a read only named pipe on the filesystem which is running Motion, it would be very u...

r7 - 18 Dec 2005 - 11:09 by KennethLavrsen

FeatureRequest2005x10x21x024904

Feature Request: Description I've done a minor bit of digital forensics work and I know that keys, signatures, and checksums are big in that world. Perhaps we ...

r2 - 18 Dec 2005 - 11:02 by KennethLavrsen

FeatureRequest2005x11x05x192736

Feature Request: Description Hello, I'm not really sure if I'm on the right place to post that, but it is about a new camera that Motion does not support with ...

r3 - 18 Dec 2005 - 11:00 by KennethLavrsen

BugReport2005x09x15x185558

BUG: LDFLAGS is always lost when using configure. i.e. line 2721,2856,3145,5439 reliably take care you loose all the LDFLAGS from the environment, CFLAGS has sim...

r7 - 18 Dec 2005 - 10:30 by KennethLavrsen

BugReport2005x10x05x212444

BUG: Many have reported that the switchfilter option disables the motion detection completely Test case Activate feature and try and detect motion Environment ...

r8 - 18 Dec 2005 - 10:30 by KennethLavrsen

BugReport2005x09x28x031852

BUG: The motion netcam code is pretty good at recovering from errors, but it appears to be designed to quit all threads if there are problems retrieving images f...

r5 - 18 Dec 2005 - 10:30 by KennethLavrsen

BugReport2005x11x13x115016

BUG: As reported on the mailing list by Joe the on_xxxx commands can again cause Zombie processes. The problem was not there in Motion 3.2.2_snap8 and was reintr...

r3 - 18 Dec 2005 - 10:29 by KennethLavrsen

BugReport2005x12x02x082809

BUG: Motion compiled from sources 3.2.3 along with ffmpeg devel 0.4.9 0.lvn.0.18.20050801.3 ffmpeg 0.4.9 0.lvn.0.18.20050801.3 causes it to Seg Fault when moti...

r3 - 18 Dec 2005 - 10:26 by KennethLavrsen

BugReport2005x10x29x072220

BUG: I have a script processing saved images and using the SECURITY SQL table as a queue. Once in a while , the images on disk are inconsistent (e.g. have 0 fil...

r2 - 18 Dec 2005 - 10:25 by KennethLavrsen

BugReport2005x12x08x161936

BUG: Getting a segfault after a time using Motion 3.2.4 snap 5 accessing a new Axis 206M Megapixel webcam, pic size is 1280x1024. Standard RH AS kernel version 2...

r7 - 18 Dec 2005 - 09:59 by KennethLavrsen

ReleaseNoteMotion3x2x4

Motion Release Release Notes Motion release 18 Dec 2005 Summary of changes since 3.2.3 Features * New text option text_event and new conversion specifi...

r4 - 18 Dec 2005 - 09:20 by KennethLavrsen

BugReport2005x12x15x022643

BUG: I did a database at mySQL. I did the configurations at motion.conf to login mySQL and open that database. But what tables i need to creat inside that datab...

r3 - 15 Dec 2005 - 21:41 by KennethLavrsen

MakeInstall

Make When you run make, all the C source files are automatically compiled and linked. Just look out for error messages. Make uses a file called "Makefile" which i...

r8 - 13 Dec 2005 - 07:10 by KennethLavrsen

MacOSX

MacOSX Motion now also supports MacOSX with similar feature set as FreeBSD but only supports network cameras at the moment. Requirements * autoconf 2.57 or ab...

r2 - 13 Dec 2005 - 00:16 by AngelCarpintero

AdvancedFilenames

Advanced Filenames Motion has a very advanced and flexible automated filenaming feature. By using conversion specifiers (codes that consist of a '%' followed by...

r7 - 12 Dec 2005 - 23:53 by KennethLavrsen

TextFeatures

Text Features Text features are highly flexible. You can taylor the text displayed on the images and films to your taste and you can add your own user defined t...

r3 - 12 Dec 2005 - 23:32 by KennethLavrsen

SupportQuestion2005x12x09x233702

Question I have installed kernel 2.6.14.3 and compiled it to also support my SAA7134 (FlyVideo3000) card. I'm also fairly sure that the modprobe that was passed ...

r4 - 12 Dec 2005 - 23:30 by AngelCarpintero

SupportQuestion2005x12x02x153609

Question still points to 3.2.3 1 Environment Motion version: 3.2.3 2 ffmpeg version: Libraries: ffmpeg, mysql, postgresql ...

r2 - 02 Dec 2005 - 16:09 by KennethLavrsen

SupportQuestion2005x11x04x064358

Question This is the error msg i try to start motion Failed to open video loopback I have this in my thread config file #camera 1 videodevice /dev/video0 target_d...

r8 - 01 Dec 2005 - 18:47 by KennethLavrsen

FeatureRequest2005x09x21x094025

Feature Request: Description should be fairly stright forward as Darwin is a (Free)BSD derivate. I am only looking for netcam support, as that is what e.g. the ...

r9 - 30 Nov 2005 - 07:51 by AngelCarpintero

BugReport2005x10x08x192350

BUG: I am running Motion 3.2.3 on an x86 64 Gentoo machine: Linux version 2.6.13 rc5 mm1 (root@localhost) (gcc version 4.0.1 (Gentoo 4.0.1, pie 8.7.8)) #11 Wed S...

r3 - 14 Nov 2005 - 00:22 by KennethLavrsen

BugReport2005x11x08x140111

BUG: When building motion 3.2.4_snap4 and motion 3.2.3 I encounter errors during the make on FC4, it happens when linksing motion. Any Ideas? Test case ... *...

r3 - 14 Nov 2005 - 00:19 by KennethLavrsen

FeatureRequest2005x10x20x210336

Feature Request: Description There are Modifiers for THREAD numbers, but I consider that threads are numbered not in the order they appear in motion.conf. Betwe...

r3 - 14 Nov 2005 - 00:15 by KennethLavrsen

FeatureRequest2005x10x05x195353

Feature Request: Description Logging of startups and captured events should go to syslog service. Even capturing logs on another machine makes sense in a headle...

r3 - 14 Nov 2005 - 00:12 by KennethLavrsen

MotionRelease3x2x4snap5

Motion Snapshot Release Release Notes 13 Nov 2005 Development Release Changes since 3.2.3 snap1 * Removed all warnings originating from the motion sourc...

NEW - 13 Nov 2005 - 18:25 by KennethLavrsen

SupportGuidelines

Motion Support Guidelines Motion support is provided by users and developers in their spare time nobody is paid to do this. So it's important that you provide ...

r4 - 07 Nov 2005 - 23:24 by KennethLavrsen

FeatureRequest2005x11x06x102138

Feature Request: Description It would be nice if motion also includes a sample thread config file showing what has to be a thread config file and what's not. Th...

r2 - 07 Nov 2005 - 23:00 by KennethLavrsen

SupportQuestion2005x11x06x141113

Question I made a script to send pictures captured by motion to another machine through ftp. Normally the command line argument is called $1 in the script. When I...

r4 - 07 Nov 2005 - 08:30 by KennethLavrsen

SupportQuestion2005x11x03x104436

Question when i start motion, i get this error msg Unkown config option: "ffmpeg_cap_new" Unkown config option: "ffmpeg_timelaps" config_thread thread config file...

r3 - 03 Nov 2005 - 17:25 by KennethLavrsen

FeatureRequest2005x09x26x003103

Feature Request: Description I got a problem using motion which I could not work around it. There is a camera at the second level watching a front gateway at th...

r4 - 30 Oct 2005 - 12:44 by KennethLavrsen

MotionRelease3x2x4snap4

Motion Snapshot Release Release Notes 30 Oct 2005 Development Release Changes since 3.2.3 snap1 * Removed all warnings originating from the motion sourc...

NEW - 30 Oct 2005 - 12:38 by KennethLavrsen

SupportQuestion2005x10x26x182813

Question I have a freshly built motion (3.2.3), on a Mandrake 10.1 machine (a Via Mini ITX). When launched, I get output that ends with: " 0 Motion going to da...

r7 - 30 Oct 2005 - 12:31 by AngelCarpintero

ExtendReplaceConversionSpecifiersDiscussion

Extend and Replace Conversion Specifiers Discussion Note: The original proposal is now implemented in Motion 3.2.1. This topic is now used to track new specifiers...

r15 - 29 Oct 2005 - 03:38 by KennethLavrsen

SupportQuestion2005x10x20x202142

Question I have a BT878 Decoder, two cams attached and third cam via Network, controlled by motion. All running on Linux SuSE 9.2, no probs so far, except with in...

r3 - 28 Oct 2005 - 05:18 by KennethLavrsen

SupportQuestion2005x10x27x202540

Question Hello, I've got some trouble using a WIFI ipcam with "netcam_url" using "http://xxx.xxx.x.x/picture.jpg" (not able to use "http://xxx.xxx.x.x/video.cgi"...

r3 - 28 Oct 2005 - 05:13 by KennethLavrsen

FeatureRequest2005x10x25x093244

Feature Request: Description Usually the first frame in a motion capture is not very descriptive of the actual movie made. The possibility to specify either a l...

r3 - 26 Oct 2005 - 09:10 by MadsenWikholm

SupportQuestion2005x10x26x001815

Question I would know if this version of Motion record sound from sound card. Best reguards. Francesco Capolupo (Italy) Environment Motion version: 3.2.3 ...

r2 - 26 Oct 2005 - 07:42 by KennethLavrsen

SupportQuestion2005x06x26x073118

Question Has anyone created any init.d scripts for starting and stopping a daemonized motion? Environment Motion version: 3.1.9 ffmpeg version: ...

r3 - 23 Oct 2005 - 22:43 by AxelAmthor

BugReport2005x10x22x113641

BUG: Hi Kenneth, I have a memory problem with Motion (both versions motion 3.2.1 motion 3.2.3) When I start it it uses about 8k of memory but after 10 hours of...

r4 - 22 Oct 2005 - 17:52 by TWikiGuest

SupportQuestion2005x09x20x190455

Question I have a problem where the webcam keeps flickering periodically to set off the motion mechanism. I don't want this to happen. This is not a hardware prob...

r4 - 20 Oct 2005 - 20:50 by KennethLavrsen

PatchEditTemplate

Description of Patch Installation of Patch Download the patch file. If it is packed as a gz or tar.gz unpack it first. Then copy it to the motion source director...

r5 - 20 Oct 2005 - 06:12 by KennethLavrsen

SupportQuestion2005x10x18x185340

Question Do you know what gives the best results for captured jpg on motion? 1. USB camera with decent 640x480 CCD such as Toucam Pro? or 2. PAL CCTV connected to...

r2 - 18 Oct 2005 - 22:31 by KennethLavrsen

SupportQuestion2005x10x18x184832

Question Just wondered if Motion/pwc can support this or if you know of another true 1.3M camera? With thanks Ian Environment Motion version: 3.2.3 ...

r2 - 18 Oct 2005 - 22:25 by KennethLavrsen

MotionPluginConfigFileSpecification

The Master Example Motion Config File The config file requirements * Format is plain text. Options are loaded with "option value". One option per line. ...

r6 - 09 Oct 2005 - 17:15 by KennethLavrsen

MotionPluginAPI

Motion Plugin API This is the Application Programming Interface for plugins used in Motion 4 This topic is not complete at all. Introduction Conceptually, ther...

r6 - 09 Oct 2005 - 00:35 by BillBrack

MotionPluginConfigFileDiscussion

Motion Plugin Config File Discussion Motion 4.X will have a plugin interface. Plugins will handle input devices, make movies, etc etc. With the new plugin inter...

r17 - 08 Oct 2005 - 13:31 by KennethLavrsen

MotionRelease3x2x4snap3

Motion Snapshot Release Release Notes 08 Oct 2005 Development Release Changes since 3.2.3 snap1 * Removed all warnings originating from the motion sourc...

NEW - 08 Oct 2005 - 03:33 by KennethLavrsen

MotionPluginConfigFileDiscussionPluginOption

Motion Plugin Config File Discussion Plugin Option Refactored from MotionPluginConfigFileDiscussion The Loading of Plugins How do we load the plugins? Here we ...

NEW - 08 Oct 2005 - 01:05 by KennethLavrsen

MotionPluginConfigFileDiscussionXML

Motion Plugin Config File Discussion XML Refactored from MotionPluginConfigFileDiscussion Main.KennethLavrsen has already decided that XML will NOT be used so th...

NEW - 08 Oct 2005 - 00:57 by KennethLavrsen

MotionPluginConfigFileDiscussionNamingAndSections

Motion Plugin Config File Discussion Naming And Sections Refactored from MotionPluginConfigFileDiscussion Plugins So what about plugins. What if two plugins de...

NEW - 08 Oct 2005 - 00:51 by KennethLavrsen

MotionPluginConfigFileDiscussionCameraThreads

Motion Plugin Config File Discussion Camera Threads Refactored from MotionPluginConfigFileDiscussion Camera threads. Today the camera threads are defined by an o...

NEW - 08 Oct 2005 - 00:48 by KennethLavrsen

BugReport2004x10x24x140610

BUG: I'm still getting a lot of zombie processes from onsave and onmpeg when I run motion 3.1.17 in daemon ( D) mode. Here are a few examples from my 'ps ef' br...

r15 - 06 Oct 2005 - 15:21 by FredericLOIRETTE

MotionPluginRequirements

Motion Plugin Requirements This topic describes the basic requirements for the Motion plugin interface This topic is not finished yet. It is work in progress. An...

r4 - 04 Oct 2005 - 06:17 by KennethLavrsen

MotionPluginIndex

Motion Plugin Index This page is an index to the subjects that describes the new Motion plugin design. * PluginArchitectureDiscussion * MotionPluginRequirem...

r3 - 03 Oct 2005 - 02:22 by VincenzoDiMassa

MotionLibrary

Motion compiled as a Library * It would be nice to have makefiles and sources that can compile both a motion library and a motion executable (maybe the executa...

r2 - 03 Oct 2005 - 02:18 by VincenzoDiMassa

PluginArchitectureDiscussion

Plugin Architecture Discussion Introduction This topic discusses a possible future plugin interface/architecture of Motion. MotionRearchitectureDiscussion contai...

r13 - 02 Oct 2005 - 14:51 by KennethLavrsen

MotionPluginDesign

Motion Plugin Design The design of the plugin interface should be described here. Make subtopics as needed. Graphics are a good thing. Main.KennethLavrsen 02 ...

NEW - 02 Oct 2005 - 13:54 by KennethLavrsen

MotionCurrentDesign

Motion Current Design Description In order to discuss a "new" design for the Motion architecture, I think it is useful to start with a diagram of the existing ar...

r5 - 02 Oct 2005 - 13:34 by KennethLavrsen

FeatureRequest2005x05x13x065852

Feature Request: Description Some netcams do not use HTTP handshaking (Linksys's WVC54G /img/mjpeg.cgi), a clear/easy place to plug in a function would make it...

r7 - 30 Sep 2005 - 10:39 by GerardSoldevila

SupportQuestion2005x09x27x073342

Question I have installed the motion 3.2.3 and found that switchfilter on (or 1 or yes) does not detect any motion though the CHANGELOG file shows that this bug w...

r2 - 27 Sep 2005 - 19:30 by KennethLavrsen

SupportQuestion2005x09x20x215403

Question I seem to have come across another problem when I place the camera out in day light, I am getting washed out images. How do I fix this problem? Environm...

r3 - 22 Sep 2005 - 20:05 by KennethLavrsen

SupportQuestion2005x09x21x081542

Question i want to use motion as a webserver to stream live video from my web camera to my LAN, i don't know what paramters to setup, although having read manual...

r2 - 21 Sep 2005 - 17:35 by AngelCarpintero

SupportQuestion2005x09x13x190822

Question I work with the version 3.17 already a longer time. Motion works perfectly. I am very content. My video map is a Hauppauge video map with 2 entrances. N...

r2 - 13 Sep 2005 - 21:30 by KennethLavrsen

SupportQuestion2005x09x10x212129

Question Hi, I'm having a problem with Motion 3.2.3 that when it detects motion, it reports 'Segmentation Fault' and crashes: root@Kylie etc # /usr/local/bin/mot...

r3 - 11 Sep 2005 - 19:56 by ChrisHarris

EventConvertionSpecifierDiscussion

Event Convertion Specifier Discussion I have in recent times received different requests and even patches related to how events are numbered. Here are some of the...

r10 - 07 Sep 2005 - 01:37 by TimWegener

SupportQuestion2005x09x05x181729

Question Hi, I am currently running motion exclusively on an Athlon 1200 box with 384Mb RAM and all is very good thanks to your superb coding I don't use the ff...

r2 - 06 Sep 2005 - 06:26 by KennethLavrsen

CompileWithDeveloperFlags

Compile With Developer Flags This topic tries to describes what the flags mean, what to do to avoid compiler warnings for each flag. From 3.2.2_snap12 a new confi...

r3 - 05 Sep 2005 - 07:08 by KennethLavrsen

MotionRelease3x2x4snap2

Motion Snapshot Release Release Notes 04 Sep 2005 Development Release Changes since 3.2.3 snap1 * Removed all warnings originating from the motion sourc...

r2 - 05 Sep 2005 - 05:46 by KennethLavrsen

FeatureRequest2005x04x21x054916

Feature Request: Description It would be good if an event id field was added to the SQL logging. The event id for a given event would be assigned to each image ...

r10 - 04 Sep 2005 - 16:51 by KennethLavrsen

FeatureRequest2005x06x30x014556

Feature Request: Description I would like to be able to set up motion to store still images from an event in a directory named by the time the event started. I...

r3 - 04 Sep 2005 - 16:43 by KennethLavrsen

FeatureRequest2005x05x26x234147

Feature Request: Description It would be nice to sample netcams at much lower rates when motion is not detected. I was looking to low_cpu to do this, but it's o...

r4 - 30 Aug 2005 - 15:45 by EijiOgata

FeatureRequest2005x07x17x062823

Feature Request: Description a camera/image source option to specify a sub process that feeds jpeg images via stdout, this will make it simple to add alternativ...

r2 - 29 Aug 2005 - 19:40 by KennethLavrsen

FeatureRequest2005x08x24x094843

Feature Request: Description It would be really great if there will be a built in cropping function in motion... I don't know the time when motion will support ...

r3 - 29 Aug 2005 - 19:40 by KennethLavrsen

FeatureRequest2005x08x19x192733

Feature Request: Description what about a time and date stamp on the image Main.StephenColes 19 Aug 2005 Follow up Comments There are time and date stamps...

r3 - 29 Aug 2005 - 19:37 by KennethLavrsen

BugReport2005x07x14x172735

BUG: I have my camera pointed at a busy street. I am seeing motion pictures posted in reverse order. For example, car enters scene is 02 20050714095026 00.jpg, c...

r13 - 29 Aug 2005 - 19:30 by KennethLavrsen

MotionRelease3x2x4snap1

Motion Snapshot Release Release Notes 28 Aug 2005 Development Release Changes since 3.2.3 snap1 * Removed all warnings originating from the motion sourc...

NEW - 28 Aug 2005 - 20:24 by KennethLavrsen

OverviewOfThreadsInMotion

Overview Of Threads In Motion Motion is a complex program with many features. One of the difficult things to understand are the many threads that runs when you st...

r2 - 27 Aug 2005 - 12:53 by KennethLavrsen

SupportQuestion2005x08x24x000656

Question I am trying to stream the image from my camera plugged in to a pixelview playtv pro tv card, using bttv drivers. The .jpg images are coming out perfectly...

r2 - 24 Aug 2005 - 02:15 by AngelCarpintero

NTP

NTP server Introduction ntp syncs your computer to a GPS, DCF77 receiver or internethost giving the correct time. Detailed Description Attached Files Installa...

r2 - 21 Aug 2005 - 21:14 by AngelCarpintero

WaitForDevice

Wait For Device Introduction w4d is a small command line program which waits for a device to be available and then exits The idea is that you run this in your fo...

NEW - 21 Aug 2005 - 16:08 by KennethLavrsen

FeatureRequest2005x08x19x192356

Feature Request: Description for a cctv system would be good to be able to perform an action if there is no video signal i.e the camera has been messed with or ...

r2 - 19 Aug 2005 - 21:06 by KennethLavrsen

SupportQuestion2005x08x18x152208

Question I have a stock Fedora core 4 system, all packages are installed with yum. I installed motion 3.2.3 from the rpm available. I had everything working just ...

r4 - 19 Aug 2005 - 13:59 by KennethLavrsen

BugReport2005x08x15x160208

BUG: I'm trying to uso motion outdoor with a Creative NX Ultra webcam. I've activated autobrightness but the image can't reach a stable state and oscillates betw...

r4 - 17 Aug 2005 - 19:10 by KennethLavrsen

BugReport2005x08x15x140701

BUG: It seems that the text added is detected as motion. I have set in motion.conf: locate off text_right "%Y %m %d\n%T %q %v" text_changes on I first noticed it...

r3 - 17 Aug 2005 - 14:37 by TWikiGuest

BugReport2005x08x15x150416

BUG: after changing to 3.2.2 i noticed that motion simply stops working when i enable the netcam no error messages or any other hints the netcam is a wcs2003 f...

r4 - 16 Aug 2005 - 22:04 by KennethLavrsen

ReleaseNoteMotion3x2x3

Motion Release Release Notes Motion release 16 Aug 2005 Summary of changes since 3.2.2 Features Bugfix release only. No new features. Bugfixes * Fixed...

r2 - 16 Aug 2005 - 21:18 by KennethLavrsen

BugReport2005x08x04x220823

BUG: With this version, motion can no longer find my ffmpeg shared object libavformat.so Test case 1. Ensure that ffmpeg is not installed in the standard dir...

r5 - 16 Aug 2005 - 16:32 by BruceDurham

PatchForVersion

Patch for Motion Version The version of Motion for which this patch is made. It may work on earlier or later versions but this is the release that the patch was g...

r38 - 16 Aug 2005 - 16:22 by KennethLavrsen

PatchForm

Form Definition Patch Topics Name:* *Type: Size: Values: Tooltip message: PatchStatus select 1 PlannedPatch, PatchInProgress, PatchTesting, Rel...

r9 - 16 Aug 2005 - 16:21 by KennethLavrsen

BugReport2005x08x14x202757

BUG: Thread debugging using libthread_db enabled New Thread 1080705760 (LWP 21038) 0 Processing thread 0 config file /etc/motion 3.2.2/motion.conf 0 Pr...

r5 - 15 Aug 2005 - 16:37 by KennethLavrsen

FeatureRequest2005x08x07x134844

Feature Request: Description A new conversion specifier to indicate which camera has detected motion in a multi cam setup would be useful for defining per camer...

r3 - 14 Aug 2005 - 11:09 by KennethLavrsen

WebcamShortWriteHandlingPatch

Webcam Short Write Handling Patch Introduction The patch re implements the handling of so called "short writes" in the webcam code. This was broken in the implem...

r9 - 13 Aug 2005 - 21:00 by KennethLavrsen

TextScalingPatch

Text Scaling Patch Introduction This patch allows the text drawn on Motion images to be normal or double size. Description of Patch Based upon the previous patc...

r11 - 13 Aug 2005 - 20:59 by KennethLavrsen

RotateBswapFix

Rotate Bswap32 Fix Introduction This patch updates the rotate module (rotate.c) slighly. The most important fix is that the __bswap_32 macro has been remained to...

r6 - 13 Aug 2005 - 20:58 by KennethLavrsen

NetcamProxyServerPatch

Implementation of optional Proxy Server for Network Cameras Introduction It is rumoured that, when the netcam code was using Curl, it was possible to specify a p...

r10 - 13 Aug 2005 - 20:58 by KennethLavrsen

NetcamFirstHeader

NetcamFirstHeader Introduction I use motion 3.2.1 (only as streaming webserver) on an old Pentium with 2 cams. Then a second motion is running from my working d...

r4 - 13 Aug 2005 - 20:53 by KennethLavrsen

NetcamCodeRewritePatch

Netcam Code Rewrite Patch Introduction A complete rewrite of the Motion Netcam code. Patch topic created by Kenneth Lavrsen on behalf of Bill Brack. Description...

r3 - 13 Aug 2005 - 20:52 by KennethLavrsen

LibJpegMmx

libjpeg mmx patch Introduction I use motion for a webcam streaming server only with 3 cam's on an old Pentium 233 MMX with 3 frames per second (one usb pwc and...

r11 - 13 Aug 2005 - 20:52 by KennethLavrsen

ImprovedLabellingPatch

Improved Labelling Patch Introduction Experiments making labeling find all labels larger than threshold instead of only the largest. Description of Patch Today,...

r6 - 13 Aug 2005 - 20:52 by KennethLavrsen

ImproveAlgDrawLocation

Improve alg_draw_location() Introduction Avoid to calculate same values each time inside loops. Description of Patch This patch just does a little improvem...

r5 - 13 Aug 2005 - 20:51 by KennethLavrsen

FramerateAdjust

Frame Rate Improvement Introduction I think the time to take a picture has to be included in the framerate calculation. Description of Patch I changed the momen...

r5 - 13 Aug 2005 - 20:51 by KennethLavrsen

FfmpegFrameRatePatch

FFMpeg Frame Rate Patch Introduction As of build 4754 of FFMpeg, the fields frame_rate and frame_rate_base have been removed from struct AVCodecContext. They hav...

r5 - 13 Aug 2005 - 20:50 by KennethLavrsen

ErrorLoggingEnhancementPatch

Enhanced error / information / debug message logging Introduction Throughout the different source modules, the logging of messages has quite a lot of different i...

r10 - 13 Aug 2005 - 20:50 by KennethLavrsen

DrawTextnImprovement

draw_textn Improvement Introduction This patch should give a small speed boost to the function draw_textn. Description of Patch Since draw_textn is a heavily ca...

r8 - 13 Aug 2005 - 20:50 by KennethLavrsen

ConvertSignalToSigaction

Convert signal to sigaction Introduction Replace use of signal function by sigaction. Description of Patch Currently, motion is using signal() function. There i...

r12 - 13 Aug 2005 - 20:49 by KennethLavrsen

AvoidCleanupSegfault

Avoid Cleanup Segfault Introduction There're some variable that are not allocated so when motion exits the cleanup process segfaults , also it's not safe to chan...

r4 - 13 Aug 2005 - 20:49 by KennethLavrsen

NetcamErrorImprovementPatch

Changes to the "new" netcam code to improve error handling Introduction Discussion and ideas for improving the error handling in the netcam module are continuing...

r10 - 13 Aug 2005 - 20:48 by KennethLavrsen

MotionCMaintenancePatch

Motion.c Maintenance and Bugfix Patch Introduction This patch does not add any functionality to Motion. It simply cleans up motion.c by adding function documenta...

r3 - 13 Aug 2005 - 20:48 by KennethLavrsen

FixStandardFunctionsParameters

Fix Standard Function Parameters Introduction Rigth now no all functions in motion follow the same standard in parameter order , i.ex most of functions that us...

r5 - 13 Aug 2005 - 20:47 by KennethLavrsen

FfmpegCodecPatch

FFMpeg Codec Compilation Patch Introduction First, see the following bug report: BugReport2005x08x05x210647 The problem is that the codec field in struct AVStrea...

r5 - 13 Aug 2005 - 20:47 by KennethLavrsen

ReleaseNoteMotion3x2x2

Motion Release Release Notes Motion release 13 Aug 2005 Summary of changes since 3.2.1 Features * New completely rewritten netcam code. * Proxy serv...

r4 - 13 Aug 2005 - 20:13 by KennethLavrsen

BugReport2005x02x19x175939

BUG: motion has been running fine. got a segmentation fault this am. discovered it some hours later. re ran motion. almost instant seg fault. and again, sim...

r6 - 13 Aug 2005 - 19:56 by KennethLavrsen

BugReport2005x03x30x095935

BUG: When curl was ditched, so was the support for proxies. I can no longer connect to netcams outside my intranet! Test case Environment Motion version:...

r10 - 13 Aug 2005 - 19:53 by KennethLavrsen

BugReport2005x03x06x023010

BUG: I can run motion with 4 network cameras on 3.1.17 with no problems (other than a buildup defunct processes). My camera models are the Panasonic KX HCM280 Pa...

r10 - 13 Aug 2005 - 19:53 by KennethLavrsen

BugReport2005x08x05x210647

BUG: So the ffmpeg guys have AGAIN change the API email from ML When I try and compile Motion I get the following errors: ffmpeg.c:315: error: request for membe...

r5 - 13 Aug 2005 - 19:52 by KennethLavrsen

BugReport2005x08x05x173526

BUG: I have motion 3.2.2_snap9. The bug seems to happen when motion is killed, and what seems to happen is that motion will create a duplicate of the last image ...

r4 - 13 Aug 2005 - 17:34 by KennethLavrsen

SupportQuestion2005x07x01x074738

Question I have installed Motion on 3.2.1. on a Suse92 server. The webcam is logitich and works very well with PWC10. The only thing is that by default it sends o...

r5 - 13 Aug 2005 - 16:26 by KennethLavrsen

SupportQuestion2005x08x10x134348

Question I have 2 AXIS cameras setup, a 2100 and a 210, each with its own thread file. I am having a weird problem that sometimes I will get notified of motion ( ...

r3 - 13 Aug 2005 - 16:24 by KennethLavrsen

MotionRelease3x1x18snap10

Motion Snapshot Release 3.1.18_snap10 Release Notes 3.1.18 snap10 15 Jan 2005 Development Release not recommended for normal use We are very interested in ge...

r7 - 13 Aug 2005 - 16:08 by KennethLavrsen

MotionGuideInstallation

Motion Guide Installation This topic consists of the following subtopics: MotionOverview, KnownProblems, InstallOverview, PrepareInstall, ConfigureScript, MakeI...

r3 - 13 Aug 2005 - 14:58 by KennethLavrsen

NetcamWithoutLocking

NetcamWithoutLocking Introduction Current netcam uses locking (mutex) to protect buffers. I found now a way to eliminate this locks using an atomic function (xch...

r14 - 13 Aug 2005 - 08:25 by PeterHolik

MemoryLeaksInMotion

Find Memory Leaks in Motion Why that is important ? Any program that use dynamic allocation of memory ( malloc , calloc , etc ... ) , should free it when that m...

r2 - 12 Aug 2005 - 23:21 by KennethLavrsen

MotionControl

MotionControl Description It is very similar to the motion control program that used the old XmlRpcApi. The difference is that it uses the new MotionHttpAPI. Th...

r6 - 11 Aug 2005 - 10:53 by EmilB

SupportQuestion2005x08x09x110945

Question I have installed my motion with the webcam port 8081 active. I am using the cambozola applet.My problem is that I think that is insecure to have opened t...

r3 - 11 Aug 2005 - 06:48 by KennethLavrsen

SupportQuestion2005x06x02x143352

Question I installed Fedora Core 3 with 2.6.11 1.27_FC3 kernel, installed all the various RPM associated including Motion 3.2.1. Using a WinTV PVR 150 with ivtv...

r3 - 11 Aug 2005 - 06:44 by KennethLavrsen

SupportQuestion2005x08x10x004803

Question I have a PTZ camera..and am looking to talk direct to it using Pelco D protocol. Does anyone know how I can do this? I'm just using a Presario PC Enviro...

r3 - 11 Aug 2005 - 06:42 by KennethLavrsen

FeatureRequest2005x07x25x143052

Feature Request: Description i have ivc 200 capture card. This card working incorrect with VIDEO_PALETTE_YUV420P, but working fine wich VIDEO_PALETTE_YUV422. Pl...

r2 - 10 Aug 2005 - 20:14 by KennethLavrsen

MotionRelease3x2x2snap11

Motion Snapshot Release This release is not a release candidate but a developers code baseline sync release. Netcam recovery is known to be broken! Release Not...

NEW - 10 Aug 2005 - 08:48 by KennethLavrsen

SupportQuestion2005x08x05x094340

Question Hey, I've got my camera set up (using ov51x driver) and I'm able to get motion to work, saving images, detecting motion and creating an mpeg. To do that ...

r5 - 09 Aug 2005 - 21:06 by TWikiGuest

NetcamRetryErrorDiscussion

Netcam and the Retry Scheme when having errors Discussion When should the netcam code give up? When should it retry? How often? How long? What messages should it ...

r16 - 09 Aug 2005 - 04:30 by BillBrack

SupportQuestion2005x08x08x033734

Question During compilation of 3.2.1 I kept getting a compilation error: ffmpeg.c line 426 __av_freep not defined... There were about ten of these errors on diffe...

r2 - 08 Aug 2005 - 07:47 by KennethLavrsen

MotionRelease3x2x2snap10

Motion Snapshot Release Release Notes 05 Aug 2005 Development Release Changes since 3.2.1 snap1 * Pthread deadlock in motion 3.2.1 fixed (Angel Carpinte...

NEW - 05 Aug 2005 - 07:54 by KennethLavrsen

BugReport2005x08x02x070017

BUG: From email on mailing list from Bill Maidment ./configure and ./configure with mysql=/usr/lib64 and ./configure with mysql=/usr/lib64/mysql all give me: c...

r3 - 04 Aug 2005 - 04:39 by KennethLavrsen

MotionRelease3x2x2snap9

Motion Snapshot Release Release Notes 03 Aug 2005 Development Release Changes since 3.2.1 snap1 * Pthread deadlock in motion 3.2.1 fixed (Angel Carpinte...

r2 - 02 Aug 2005 - 23:27 by AngelCarpintero

FeatureRequest2005x05x31x083439

Feature Request: Description add the line openlog("motion", LOG_PID LOG_NDELAY, LOG_DAEMON); ( works well in motion.c in function motion_loop(), right before...

r4 - 02 Aug 2005 - 23:18 by KennethLavrsen

FeatureRequest2005x06x30x020826

Feature Request: Description I like to use the text feature to put a timestamp on my videos and stills from motion. When capturing at 640x480, the text tends t...

r2 - 02 Aug 2005 - 23:16 by KennethLavrsen

BugReport2005x08x01x150922

BUG: Motion Restart Mon Aug 1 09:14:33 EDT 2005 Motion running as daemon process Thread 1 is from thread1.conf Thread 2 is from thread2.conf Thread 1 started Thr...

r7 - 02 Aug 2005 - 23:05 by KennethLavrsen

BugReport2005x07x14x212356

BUG: Bug BugReport2005x02x11x170019 included a patch to resolve the issue. This was included in motion 3.1.19_snap2. It appears this bug was reintroduced with ...

r7 - 02 Aug 2005 - 23:04 by KennethLavrsen

BugReport2005x05x26x125712

BUG: When running with 3 netcams, there are 7 threads/processus, main and 2 threads per netcam (1 3*2=7, no http control, no webcam). When hitting Ctrl C, most o...

r5 - 02 Aug 2005 - 23:04 by KennethLavrsen

NewDrawTextMethod

New Draw Text Method Introduction This patch is a new method for drawing characters on Motion frames. Description of Patch Previously, the function draw_textn h...

r3 - 02 Aug 2005 - 22:35 by KennethLavrsen

SupportQuestion2005x07x27x094302

Question hi to all, i'm working with motion version 3.0.4 and before I upgrade to latest version, i need work with that..... The problem is with mask... I have cr...

r2 - 02 Aug 2005 - 11:16 by KennethLavrsen

MotionRelease3x2x2snap8

Motion Snapshot Release Release Notes 01 Aug 2005 Development Release Changes since 3.2.1 snap1 * Pthread deadlock in motion 3.2.1 fixed (Angel Carpinte...

NEW - 01 Aug 2005 - 07:33 by KennethLavrsen

SupportQuestion2005x07x17x092359

Question I'm having a problem with frames being recorded out of sequence in both the ffmpeg generated video files and the jpeg snapshots. Timestamps go in order,...

r5 - 19 Jul 2005 - 15:28 by KennethLavrsen

BugReport2005x05x09x004056

BUG: if you set first thread to 640x480 and second to 320x240 server don't works and crash with * glibc detected * free(): invalid pointer: 0xb4658008 * device: ...

r3 - 19 Jul 2005 - 03:13 by KennethLavrsen

BugReport2005x03x23x203016

BUG: Motion.BugReport2005x01x30x190907 did not fix the compilation issue on certain VIA processors. When compiling for VIA Samuel 2, Ezra, Ezra T architectures ...

r5 - 19 Jul 2005 - 03:12 by KennethLavrsen

MotionRelease3x2x2snap7

Motion Snapshot Release Release Notes 17 Jul 2005 Development Release Changes since 3.2.1 snap1 * Pthread deadlock in motion 3.2.1 fixed (Angel Carpinte...

NEW - 17 Jul 2005 - 21:25 by KennethLavrsen

MotionConfAddition

Motion Conf Addition Patch Introduction adds conf options to bind to a single IP address, an another config option to create a PID file Description of Patch Fo...

r9 - 16 Jul 2005 - 13:34 by EvilPete

SupportQuestion2005x07x14x150232

Question i'm planning to get a computer that dedicates on capturing from video for a security system. I'm planning on 4 leadtek tv tuner cards and each of them ha...

r2 - 15 Jul 2005 - 14:09 by KennethLavrsen

SignedUnsignedCharsInMotion

Signed and Unsigned Chars in Motion Safe means that the function works with both signed and unsigned. This topic was created to figure out what needed to be chang...

r6 - 14 Jul 2005 - 20:20 by KennethLavrsen

MotionRelease3x2x2snap6

Motion Snapshot Release Release Notes 13 Jul 2005 Development Release Changes since 3.2.1 snap1 * Pthread deadlock in motion 3.2.1 fixed (Angel Carpinte...

NEW - 12 Jul 2005 - 23:38 by KennethLavrsen

WebcamCodeOverview

Webcam Code Overview Webcam Defined in webcam.h The webcam_buffer struct references the picture that gets streamed struct webcam_buffer ^ unsigned char ...

r4 - 12 Jul 2005 - 23:24 by KennethLavrsen

BugReport2005x06x23x065932

BUG: BUG: Motion will not run with ffmpeg 0.4.9pre1 CVS builds from at least 20050517 and on. The ffmpeg guys have changed the API again on the CVS version of ff...

r2 - 11 Jul 2005 - 18:05 by KennethLavrsen

MotionRelease3x2x2snap5

Motion Snapshot Release Release Notes 11 Jul 2005 Development Release Changes since 3.2.1 snap1 * Pthread deadlock in motion 3.2.1 fixed (Angel Carpinte...

NEW - 10 Jul 2005 - 23:26 by KennethLavrsen

ReleasedNextSnapshot

Patch Released in Next Snapshot This means that the patch has been integrated in the source code and ready for a snap shot release. Kenneth added this new state s...

NEW - 10 Jul 2005 - 12:18 by KennethLavrsen

PatchBounced

Patch Bounced This is for patches that needs more work. It can be a patch that simply does not work at all. It can be a patch where the feature is not accepted as...

NEW - 10 Jul 2005 - 12:18 by KennethLavrsen

SupportQuestion2005x07x06x143026

Question Jul 6 18:32:19 server motion: 0 ioctl (VIDIOCGCAP): Invalid argument Jul 6 18:32:19 server motion: 0 Capture error Invalid argument This does mean t...

r2 - 06 Jul 2005 - 15:43 by KennethLavrsen

FeatureRequest2005x05x27x140650

Feature Request: Description we could use ?var=value from HTTP protocol to set some interesting things like grab=1 could grab just one picture and cl...

r3 - 05 Jul 2005 - 06:17 by KennethLavrsen

FeatureRequest2005x05x05x150519

Feature Request: Description using a http://camera:server/?mode=single could return just one jpeg image from camera for grab images, with wget it could return l...

r8 - 05 Jul 2005 - 06:10 by KennethLavrsen

FeatureRequest2005x03x31x223032

Feature Request: Description We have an external command option when an event is started. Would be usefull to have the same when an event ends. Something like '...

r2 - 05 Jul 2005 - 06:05 by KennethLavrsen

MotionRelease3x2x2snap4

Motion Snapshot Release Release Notes 27 Jun 2005 Development Release Changes since 3.2.1 snap1 * Pthread deadlock in motion 3.2.1 fixed (Angel Carpinte...

r2 - 03 Jul 2005 - 22:52 by KennethLavrsen

SuSE92Prep

Compiling on SuSE 9.2 This topic is a bit our of date. It covers Motion 3.1.X. From Motion 3.2.1 you can ignore the libwww and xmlrpc part since these are no long...

r2 - 03 Jul 2005 - 16:32 by KennethLavrsen

FeatureRequest2005x03x31x231018

Feature Request: Description There is a serially controlled 4 port video switcher (called a VS 400) that was packaged with the iVista software that lets one vid...

r2 - 30 Jun 2005 - 01:58 by TWikiGuest

SupportQuestion2005x05x20x221500

Question I have an Axis 210 camera. I am using the following netcam url per the "Working Devices" Section of the site: netcam_url http://xxx.xxx.xxx.xxx/axis cgi/...

r5 - 27 Jun 2005 - 06:45 by KennethLavrsen

SupportQuestion2005x06x03x083931

Question The PHP script (control204pt.php) provided by Kenneth to control the Tilt/Pan of the webcam works fine for me as long as I dont press the submit buttons ...

r2 - 27 Jun 2005 - 06:40 by KennethLavrsen

SupportQuestion2005x06x08x131818

Question I have a GE EasyCamPro, Model H098064 which uses the ov51x module (availabe from: http://alpha.ovcam.org/ov511/ ..to get support for the ov519), and appa...

r2 - 27 Jun 2005 - 06:38 by KennethLavrsen

SupportQuestion2005x06x21x101559

Question Hello, I wanted to install motion server on 2 different server and with an ip virtual address share request between the 2 different server. Is here any p...

r6 - 27 Jun 2005 - 06:35 by KennethLavrsen

NetcamStabilityPatch

Netcam Stability Patch Introduction This is a new clean page to start working on getting the StreamingNetcamWithoutCurl stable. Description of Patch This is a m...

r51 - 27 Jun 2005 - 06:23 by KennethLavrsen

PatchStatus

Patch Status The status of the patch. * PlannedPatch Patch is planned but not yet coded * PatchInProgress Patch is being coded but no files released yet...

r2 - 27 Jun 2005 - 06:21 by KennethLavrsen

ReleasedSnapshot

Patch Released in Motion Snapshot Patch is complete and will be included in the next version of Motion. It is available for final testing in a Motion Snapshot Rel...

r2 - 27 Jun 2005 - 06:20 by KennethLavrsen

FfmpegPatch049

FFmpeg 0.4.9pre1 patch Introduction This patch enables Motion to be built with FFmpeg 0.4.9pre1 and also newer 0.4.8 builds (such as the ones available for Gento...

r33 - 27 Jun 2005 - 06:20 by KennethLavrsen

MotionRelease3x1x18snap11

Motion Snapshot Release 3.1.18_snap11 Note The formal release 3.1.18 is now available. You should not need to download this snap shot release. The formal 3.1.18...

r5 - 27 Jun 2005 - 06:20 by KennethLavrsen

MotionRelease3x1x18snap7

Motion Snapshot Release 3.1.18_snap7 Release Notes 3.1.18 snap7 17 Nov 2004 Development Release not recommended for normal use Released as snapshot for devel...

r6 - 27 Jun 2005 - 06:20 by KennethLavrsen

MotionRelease3x1x18snap8

Motion Snapshot Release 3.1.18_snap8 Release Notes 3.1.18 snap8 10 Dec 2004 Development Release not recommended for normal use Released as snapshot for devel...

r5 - 27 Jun 2005 - 06:20 by KennethLavrsen

MotionRelease3x1x18snap9

Motion Snapshot Release 3.1.18_snap9 Release Notes 3.1.18 snap9 03 Dec 2004 Development Release not recommended for normal use We are very interested in gett...

r4 - 27 Jun 2005 - 06:20 by KennethLavrsen

PreviewShotsPatch

Preview Shots Patch Introduction Some people have built nice frontends to present their images created by motion on a web site for easy access. I would actually ...

r10 - 27 Jun 2005 - 06:20 by KennethLavrsen

ReleaseNoteMotion3x1x18

Release Note Motion 3.1.18 3.1.18 Summary of changes since 3.1.17. * Removed the Berkeley mpeg feature * New brightness, contrast, hue and saturation o...

r3 - 27 Jun 2005 - 06:20 by KennethLavrsen

SignalLossDetectionPatch

SignalLossDetectionPatch Introduction This patch does work but it is NOT ready for general use yet for a number of reasons: * Updates to motion control not do...

r2 - 27 Jun 2005 - 00:21 by KennethLavrsen

NetcamCodeOverview

Netcam Code Overview The Camera Thread Side The netcam code is initiated from video.c function vid_start() by calling the function * netcam_start(cnt) Each vi...

r4 - 26 Jun 2005 - 23:47 by KennethLavrsen

FeatureRequest2005x06x01x171033

Feature Request: Description have forked child proccess indcate there status in ARGV 0 , thus a better view of the current the state of things can be monitored ...

r5 - 24 Jun 2005 - 22:12 by KennethLavrsen

FeatureRequest2005x03x31x230802

Feature Request: Description It would be nice if the inbuilt web server for webcam view could stream MPEG4 directly instead of multipart JPEG. that way you coul...

r2 - 24 Jun 2005 - 21:54 by KennethLavrsen

FeatureRequest2005x04x07x175613

Feature Request: Description It would be nice to be able to define a new virtual webcam in motion.conf containing the picture from all the available webcams in ...

r3 - 24 Jun 2005 - 21:52 by KennethLavrsen

PhilipsWebcamDriverInfo

Philips Webcam Driver Information. Some will have noticed that the pwc driver is no longer in the new kernels. This page provides information and resources to get...

r7 - 24 Jun 2005 - 00:26 by KennethLavrsen

MotionRelease3x2x2snap3

Motion Snapshot Release Release Notes 23 Jun 2005 Development Release Changes since 3.2.1 snap1 * Pthread deadlock in motion 3.2.1 fixed (Angel Carpinte...

r3 - 23 Jun 2005 - 23:10 by AngelCarpintero

MotionRelease3x2x2snap2

Motion Snapshot Release 3.2.2_snap2 Release Notes 3.2.2 snap2 22 Jun 2005 Development Release Changes since 3.2.1 snap1 * Pthread deadlock in motion 3.2.1 f...

r2 - 22 Jun 2005 - 23:06 by KennethLavrsen

ChdirNetCamWgetPatch

Chdir and Netcam wget Patches Posted by Main.KennethLavrsen based on emails from Main.ChristopheGRENIER Introduction Two patches from mailing list chdir Please ...

r4 - 08 Jun 2005 - 07:33 by EvilPete

SupportQuestion2005x05x10x075920

Question I have resently aquired one of these cammera's but find the firmware not up to par, it will only record for 5 seconds on motion detect so I am looking i...

r4 - 06 Jun 2005 - 19:21 by KennethLavrsen

MotionRelease3x2x2snap1

Motion Snapshot Release 3.2.2_snap1 Release Notes 3.2.2 snap1 03 Jun 2005 Development Release Changes since 3.2.1 snap1 * Pthread deadlock in motion 3.2.1 f...

r3 - 06 Jun 2005 - 19:21 by KennethLavrsen

FeatureRequest2005x05x30x143842

Feature Request: Description OK Here is my last angle on this request Embed in the Jpeg image Motion information as comments using the jpeg_write_marker funct...

r6 - 06 Jun 2005 - 19:19 by KennethLavrsen

FeatureRequest2005x06x01x102311

Feature Request: Description an option for cams not to record / take snapshots at set time frames / time periods would be useful. So to record only when one is ...

r2 - 01 Jun 2005 - 19:31 by KennethLavrsen

MotionCntStructureOverview

Motion's Cnt Structure Overview of all the fields List of all variable within the cnt structure. If the variable itself is a structure it should link to a table...

NEW - 30 May 2005 - 16:39 by KennethLavrsen

BugReport2005x05x02x180550

BUG: As described at http://dotnetjunkies.com/WebLog/afontes/archive/2004/10/15/28726.aspx motion headers cause HTTP protocol violation when using DOT.NET The is...

r9 - 29 May 2005 - 06:25 by KennethLavrsen

FeatureRequest2005x05x06x145420

Feature Request: Description I was wondering if it would be possible to add the pixel dif count in the mjpeg stream. Somewhere between the boundary and content_...

r5 - 29 May 2005 - 06:25 by KennethLavrsen

FeatureRequest2005x05x20x235512

Feature Request: Description OK I have another angle on this. Not wanting to break the mjpeg stream protocol how about adding the following Add yet another mot...

r4 - 29 May 2005 - 06:25 by KennethLavrsen

MotionSoapService

MotionSOAP. A webservice running under MONO Introduction MotionSOAP is a WebService that runs under Mono. It is rather a primative phase at the moment. I plan...

r8 - 29 May 2005 - 06:25 by KennethLavrsen

SetupModePatch

SetupModePatch Introduction Setup_mode is a new feature to enable you to tune basic settings in a more comfortable way. Description of Patch With setup_mode ena...

r14 - 28 May 2005 - 23:06 by KennethLavrsen

PthreadFixPatch

Pthread Fix Posted by Main.KennethLavrsen based on email from Main.ChristopheGRENIER Introduction The pthread_cond_signal() routine is used to signal (or wake up...

r4 - 28 May 2005 - 23:06 by KennethLavrsen

OnXxxCommandsPatch

OnXxxCommandsPatch Introduction Redesign of the current external commands interface. (Ref FeatureRequest2005x03x31x223032) Description of Patch A redesign of th...

r9 - 28 May 2005 - 23:03 by KennethLavrsen

FixedMaskFileOnMotionImagesPatch

Fixed Mask File On Motion Images Patch Introduction This is a small feature added to 3.2.1 which shows the fixed mask (in addition to the smart mask) in bright r...

r4 - 28 May 2005 - 23:03 by KennethLavrsen

XMotionTool

Project Name XMotion Introduction XMotion is a graphical interface which supports viewing the pictures captured (via FTP or local file system) and the interactiv...

r2 - 28 May 2005 - 06:51 by KennethLavrsen

BugReport2005x03x27x112843

BUG: Reported by Main.KennethLavrsen for Philip Marien I've come across a problem, and I'm not sure it qualifies as a bug, patch or whatever... Here it goes: if ...

r3 - 27 May 2005 - 04:06 by KennethLavrsen

BugReport2005x03x21x070534

BUG: while working with onmpeg parameter, I have found that some file descriptors were leak to sub process. It can have several effects: * a good subprocess c...

r5 - 27 May 2005 - 04:05 by KennethLavrsen

BugReport2005x01x30x073616

BUG: In the documentation for the gap setting, it indicates that the timer for gap is supposed to start after the post_capture has finished its last frame, but ...

r5 - 27 May 2005 - 04:05 by KennethLavrsen

BugReport2005x03x30x011107

BUG: I have (up to 5) Firewire cameras driving 5 vloopback devices into Motion. My program that drives the Firewire cameras converts all frames to rgb24 format. ...

r4 - 27 May 2005 - 04:04 by KennethLavrsen

BugReport2005x02x28x170109

Bug: This was originally raised as a support question but after BugReport2005x03x30x011107 was resolved I am 99% sure it will also have resolved this one because...

r7 - 27 May 2005 - 04:04 by KennethLavrsen

BugReport2005x02x12x172946

BUG: When i run Motion with 2 NetCams, one Cam ist stopping after a short time. My NetCam from Thread1 is a D Link dcs 900, the Cam for Thread2 is an Axis 205. B...

r13 - 27 May 2005 - 04:03 by KennethLavrsen

BugReport2005x04x24x205933

BUG: Main.KennethLavrsen has entered this bug on behalf of Main.WillCooke because the bug is so nasty that it is worth having proper traceability on. Originally ...

r2 - 27 May 2005 - 04:02 by KennethLavrsen

BugReport2005x02x26x195358

BUG: I am using a P2 450 running kernel 2.6.5 on a smp machine. The capture card is a generic Videologic card using the Brooktree 848 capture chip and a single b...

r7 - 27 May 2005 - 04:02 by KennethLavrsen

BugReport2005x05x02x205307

BUG: HTTP Protocol not compatible some clients like pclient (palantir) can't read header i changed the code, it's on http://www.roberto.spadim.com.br/webcam.c no...

r7 - 27 May 2005 - 04:02 by KennethLavrsen

BugReport2005x05x07x042849

BUG: we are getting there! files are attached Test case Environment Motion version: 3.2.1 snap16a ffmpeg version: Shared libraries: ...

r4 - 27 May 2005 - 04:01 by KennethLavrsen

BugReport2005x05x22x213229

BUG: Jeff A. Volckaert reported on the Motion mailing list To: Subject: Motion user mpeg4 @ 0x377a10 only YUV420 is supported I have a fresh install of snap ...

r2 - 27 May 2005 - 04:00 by KennethLavrsen

BugReport2005x05x06x174416

BUG: This is a megapixel lumenera camera. When connecting to the mjpeg stream, motion says: unknown Content Type It looks like this to me. I don't know if the...

r7 - 27 May 2005 - 04:00 by KennethLavrsen

BugReport2005x05x21x105335

BUG: Posted by Main.KennethLavrsen from mailing list posting from Main.ChristopheGRENIER Sometimes motion try to free an invalid memory area for (j=0; config_par...

r5 - 27 May 2005 - 03:59 by KennethLavrsen

BugReport2005x04x13x214912

BUG: Motion 3.2.1 memory leaks mejorly when restarted through http control. Test case * Start motion * Run top * Connect to the control port with a bro...

r4 - 27 May 2005 - 03:58 by KennethLavrsen

FeatureRequest2005x05x24x183713

Feature Request: Description It would be nice to produce xvid videos directly instead of converting them from msmpeg4 / mpeg4 through ffmpeg. Main.WolfgangAnd...

r3 - 27 May 2005 - 01:26 by AngelCarpintero

ReleaseNoteMotion3x1x20

Release Note Motion 3.1.20 Main.KennethLavrsen 26 May 2005 Note: We recommend upgrading to Motion 3.2.1. Motion 3.1.X will not be maintained much longer. Mo...

r3 - 26 May 2005 - 00:34 by KennethLavrsen

ReleaseNoteMotion3x2x1

Release Note Motion 3.2.1 Main.KennethLavrsen 26 May 2005 Summary of changes since 3.1.19 Features * Control Interface: XMLRPC replaced by http interfa...

r6 - 26 May 2005 - 00:34 by KennethLavrsen

SupportQuestion2005x05x25x084501

Question I did setup motion on my Debian system now and it works fine so far after some development of a driver for my camera. I did search in all options and did...

r2 - 25 May 2005 - 14:32 by AngelCarpintero

MotionRelease3x2x1snap17

Motion Snapshot Release 3.2.1_snap17 Release Notes 3.2.1 snap17 16 May 2005 Development Release not recommended for normal use The netcam code is still under...

r5 - 25 May 2005 - 01:44 by AngelCarpintero

MotionRelease3x1x20snap7

Motion Snapshot Release 3.1.20_snap7 Release Notes 3.1.20 snap7 26 Apr 2005 Bugfix Development Release not recommended for production use The netcam code is ...

r3 - 25 May 2005 - 00:55 by AngelCarpintero

FeatureRequest2005x05x12x041648

Feature Request: Description we could put webcam server and http control server running on the same port? if client connect to example: http://myhost:myport/web...

r2 - 24 May 2005 - 20:33 by KennethLavrsen

SupportQuestion2005x05x16x073620

Question does anybody know a eletronic circuit to talk with servos throw rs232 or rs485??? a servo to pan and another to tilt (maybe more one to zoom :P) but just...

r2 - 23 May 2005 - 21:46 by KennethLavrsen

SupportQuestion2005x05x20x164007

Question I have 3 cameras set up 2 v4l and 1 netcam. The seem to work fine (ie they detect motion and start recording and stop when the motion is done) but when ...

r4 - 23 May 2005 - 20:24 by KennethLavrsen

SupportQuestion2005x04x24x073352

Question Receiving the following messages when using Motion with an iCamView network webcam: Starting motion detection : motion Processing thread 0 config file ...

r4 - 21 May 2005 - 07:57 by KennethLavrsen

SupportQuestion2005x05x11x161256

Question root@fedora3 r # ./mostart Processing thread 0 config file /etc/motion/motion.conf Thread0 device: /dev/video0 input: 8 mpeg4 @ 0x37ee330 only YUV420...

r7 - 21 May 2005 - 07:52 by KennethLavrsen

GMotionLive

gmotionlive Introduction gmotionlive is a gtk based webcam viewer Detailed Description gmotionlive is a multipart/x mixed replace viewer. It uses gnomevfs to op...

r3 - 19 May 2005 - 04:56 by KennethLavrsen

SupportQuestion2005x05x15x002651

Question I have a Geovision GV250 card with 2 cameras. I really want to switch the PC to linux, all my other 4 are, but I need the cameras running. Is this possib...

r2 - 15 May 2005 - 07:10 by AngelCarpintero

FeatureRequest2005x05x02x210851

Feature Request: Description Optimize capture with mmap read and writes this can make capture from 10 fps to 30 fps!!! like in palantir http://www.fastpath.it/p...

r10 - 13 May 2005 - 06:16 by KennethLavrsen

BugReport2005x05x09x003527

BUG: when i changed height 288, width 352 to height 360, width 440 (*1.25) i get a green screen in webcam server i'm using round robin (4 threads channel: 0,1,...

r2 - 09 May 2005 - 05:21 by KennethLavrsen

MotionRelease3x2x1snap16

Motion Snapshot Release 3.2.1_snap16 Release Notes 3.2.1 snap16 08 May 2005 Development Release not recommended for normal use The netcam code is still under...

NEW - 08 May 2005 - 23:11 by KennethLavrsen

BugReport2005x05x06x122523

BUG: mmap may not be working, or working wrong the fps is too loo, 10 fps using the palantir server i can get 30 fps Test case Environment Motion version...

r2 - 06 May 2005 - 14:52 by AngelCarpintero

MotionRelease3x2x1snap15

Motion Snapshot Release 3.2.1_snap15 Release Notes 3.2.1 snap15 26 Apr 2005 Development Release not recommended for normal use The netcam code is still under...

NEW - 26 Apr 2005 - 05:15 by KennethLavrsen

SupportQuestion2005x04x24x145153

Question Buon giorno :D in the first place, sorry for my bad english :\ I have this problem.. After compile this versions of motion (i try on 4 different computer...

r2 - 24 Apr 2005 - 16:12 by KennethLavrsen

PatchSmartMask

Smartmask Patch Introduction Today motion provides a static mask to turn off sensitivity in certain areas. This is very usefull to mask a street with cars passin...

r29 - 23 Apr 2005 - 07:09 by KennethLavrsen

MotionRelease3x1x20snap6

Motion Snapshot Release 3.1.20_snap6 Release Notes 3.1.20 snap6 22 Apr 2005 Bugfix Development Release not recommended for production use The netcam code is ...

NEW - 22 Apr 2005 - 16:14 by KennethLavrsen

MotionRelease3x2x1snap14

Motion Snapshot Release 3.2.1_snap14 Release Notes 3.2.1 snap14 22 Apr 2005 Development Release not recommended for normal use The netcam code is still under...

NEW - 22 Apr 2005 - 16:00 by KennethLavrsen

SecureWebcamFeeds

HowTo: Secure your WebCam feeds using Apache, Basic Auth and SSL on Debian This is a draft document detailing how to use Apache to lock down your webcam feeds us...

r13 - 20 Apr 2005 - 21:31 by WillCooke

TestForm

Form Definition Support Questions Name:* *Type: Size: Values: Tooltip message: TopicTitle text 70 The title is shown in the tables Suppor...

r2 - 20 Apr 2005 - 06:28 by DianeChayer

TestPage1

TestPage1 Test page Main.KennethLavrsen 20 Apr 2005

NEW - 20 Apr 2005 - 06:19 by KennethLavrsen

TuningMotion

Tuning Motion Motion 3.2 introduces a new feature Setup Mode. This is a great new feature with really make tuning all the settings of Motion much more easy and ...

r7 - 18 Apr 2005 - 21:12 by KennethLavrsen

MotionRelease3x2x1snap13

Motion Snapshot Release 3.2.1_snap13 Release Notes 3.2.1 snap13 15 Apr 2005 Development Release not recommended for normal use The netcam code is still under...

r4 - 17 Apr 2005 - 19:26 by KennethLavrsen

StreamingNetcamWithoutCurl

Streaming Netcam Without Curl Introduction This patch was originally submitted by Christopher Price on 14th of August 2004 on the Motion Mailing List Descriptio...

r74 - 17 Apr 2005 - 02:38 by AngelCarpintero

SupportQuestion2005x04x16x144132

Question If have configured motion so that it will save every hour a mpeg movie. (Like movie %He hour) That works fine. But the next day it appends the recording ...

r3 - 16 Apr 2005 - 16:19 by KennethLavrsen

MotionRelease3x1x20snap5

Motion Snapshot Release 3.1.20_snap5 Release Notes 3.1.20 snap5 13 Apr 2005 Bugfix Development Release not recommended for production use The netcam code is ...

r2 - 15 Apr 2005 - 23:30 by AngelCarpintero

MotionRelease3x2x1snap12

Motion Snapshot Release 3.2.1_snap12 Release Notes 3.2.1 snap12 13 Apr 2005 Development Release not recommended for normal use The netcam code is still under...

r2 - 15 Apr 2005 - 23:23 by AngelCarpintero

MotionGuideSpecialFeatures

Motion Guide Special Features This topic consists of the following subtopics: TrackingControl, UsingDatabases, LoopbackDevice. Main.KennethLavrsen 13 Apr 20...

NEW - 13 Apr 2005 - 06:37 by KennethLavrsen

ErrorLogging

Error Logging Motion reports errors to the console when it runs in non daemon mode. And it outputs even more information when run in setup mode. Error logging h...

r5 - 13 Apr 2005 - 06:24 by KennethLavrsen

TrackingControl

Tracking Control This is still at the experimental stage. Read more about it motion tracking page. Tracking Feature with Logitech Quickcam Sphere/Orbit Motion ...

r3 - 12 Apr 2005 - 21:58 by KennethLavrsen

BugReport2005x02x03x035918

BUG: I run motion with multiple network cameras. At startup, if one of my cameras refuses a network connection then motion quits. This behavior is not good for ...

r7 - 12 Apr 2005 - 05:26 by BruceDurham

SnapshotsWebCam

Snapshots The Traditional Periodic Web Camera Motion can also act like a traditional web camera. See the also snapshot_filename option in the section Advanced F...

r3 - 11 Apr 2005 - 22:45 by KennethLavrsen

MotionDetectionSettings

Motion Detection Settings These are the options that controls the detection of motion. Further details follows after. Main.KennethLavrsen 05 Apr 2005

r10 - 11 Apr 2005 - 22:39 by KennethLavrsen

MotionQuickStartGuide

Father Ted's Motion Quick Start Guide

NEW - 11 Apr 2005 - 21:50 by KennethLavrsen

ImageFileOutput

Image File Output The following options controls how Motion generates images when detection motion. Main.KennethLavrsen 11 Apr 2005

r4 - 11 Apr 2005 - 06:58 by KennethLavrsen

ConfigRangeCheckingDiscussion

Config Range Checking Discussion This topic is created to make an overview of config options and their range, valid values and defaults Config Options type, ra...

r2 - 09 Apr 2005 - 19:47 by KennethLavrsen

MotionRelease3x1x20snap4

Motion Snapshot Release 3.1.20_snap4 Release Notes 3.1.20 snap4 03 Apr 2005 Bugfix Development Release not recommended for production use The netcam code is ...

NEW - 03 Apr 2005 - 22:00 by KennethLavrsen

MotionRelease3x2x1snap11

Motion Snapshot Release 3.2.1_snap11 Release Notes 3.2.1 snap11 03 Apr 2005 Development Release not recommended for normal use The netcam code is still under...

NEW - 03 Apr 2005 - 02:46 by KennethLavrsen

OnXxxxFeatureDiscussion

on_xxxx Feature Discussion Proposal Motion has some config options to start external programs or scripts when a certain event has occurred. These options are fol...

r6 - 03 Apr 2005 - 02:09 by KennethLavrsen

FeatureRequest2005x04x01x193531

Feature Request: Description I've got many cameras, each set up to write a "thumb.jpg" each second which provides the current picture. I've done this by using ...

r2 - 02 Apr 2005 - 09:27 by KennethLavrsen

SupportQuestion2005x03x10x221925

Question I've just upgraded from 3.1.17 to 3.1.19 and seem to be having some netcam connection issues. (Everything worked ok in 3.1.17). I'm running LFS 5.0 with...

r4 - 01 Apr 2005 - 18:25 by TheSpike

SupportQuestion2005x03x27x224143

Question Hi, I have motion running (works fine) but when I do live streaming is also works goed only the bandwith is over 300kbps. My upload line is only 128kbps ...

r3 - 01 Apr 2005 - 09:15 by MartijnZuiderwijk

KevinsWebpage

Kevin's Motion Webpages created in PHP Introduction This web interface for motion allowing for 4 camera's to be viewed with Firefox and Internet Explorer. I su...

r9 - 01 Apr 2005 - 05:40 by KennethLavrsen

ToDoList

Motion To Do List This topic has been replaced by RoadMap and FeatureRequests Main.KennethLavrsen 30 Sep 2004

r12 - 31 Mar 2005 - 23:47 by KennethLavrsen

FeatureRequest2005x03x31x232253

Feature Request: Description This would be very handy to have when browsing the database later on, eg. users could use a web based search system to search only ...

NEW - 31 Mar 2005 - 23:23 by KennethLavrsen

FeatureRequest2005x03x31x232126

Feature Request: Description Have you considered a forward looking algoritm ? Let me explain what I mean. The algoritm in your technology description currently ...

NEW - 31 Mar 2005 - 23:22 by KennethLavrsen

FeatureRequest2005x03x31x231754

Feature Request: Description Have you considered a FTP client to upload the single frame caputered (or movies) to an FTP server? Even also not when motion is de...

NEW - 31 Mar 2005 - 23:21 by KennethLavrsen

FeatureRequest2005x03x31x231555

Feature Request: Description Add code to motion that would indicate it is capturing motion. along the lines of locate but instead of drawing a box around what t...

NEW - 31 Mar 2005 - 23:17 by KennethLavrsen

FeatureRequest2005x03x31x231419

Feature Request: Description Would time based settings be possiable? In particular I have found that I get much better night time capturing with much more senst...

NEW - 31 Mar 2005 - 23:15 by KennethLavrsen

FeatureRequest2005x03x31x231146

Feature Request: Description The option "output_motion" permits to see what is changed into a picture. This function works only to produce MPEG or JPEG files, ...

NEW - 31 Mar 2005 - 23:13 by KennethLavrsen

FeatureRequest2005x03x31x225338

Feature Request: Description otherwise mail blows chunks when sending from the current user's account. being able to define a From address per thread, this woul...

NEW - 31 Mar 2005 - 22:57 by KennethLavrsen

FeatureRequest2005x03x31x224427

Feature Request: Description Added to this page by Main.KennethLavrsen on behalf of Main.JoergWeber. Main.KennethLavrsen 31 Mar 2005 Follow up Created a sp...

NEW - 31 Mar 2005 - 22:47 by KennethLavrsen

FeatureRequestStatus

Feature Request Status * New Submitted but noone has decided on it. * Discussion Feature is being discussed. Participate by editing the topic. You can s...

NEW - 31 Mar 2005 - 22:24 by KennethLavrsen

FeatureRequestForm

Form Definition Feature Requests Name:* *Type: Size: Values: Tooltip message: TopicTitle text 70 The title is shown in the tables Feature...

NEW - 31 Mar 2005 - 22:19 by KennethLavrsen

FeatureRequestTemplate

%NOP{ * Note: Do not edit this topic. Go to FeatureRequests * Set ALLOWTOPICCHANGE = Main.TWikiAdminGroup }% Feature Request: Description Follow up ...

NEW - 31 Mar 2005 - 22:12 by KennethLavrsen

BugReport2005x03x03x141014

BUG: /tmp is growing since the use of tmpfile. Test case using motion with some netcam (axis) with threads. Environment Motion version: 3.1.19 snap4 ...

r10 - 31 Mar 2005 - 21:28 by KennethLavrsen

SupportQuestion2005x03x30x084459

Question Good morning, I need to detect when an event is ended. I found that motion supports: execute event started onsave image saved onffmpegclose even...

r2 - 30 Mar 2005 - 20:58 by KennethLavrsen

SupportQuestion2005x03x29x183058

Question i have a problem with a cam usb Genius the program ....is posible configure this program for this cam? and if is posible please help me ...what i do ???...

r2 - 30 Mar 2005 - 20:31 by KennethLavrsen

MotionRelease3x1x20snap3

Motion Snapshot Release 3.1.20_snap3 Release Notes 3.1.20 snap3 28 Mar 2005 Bugfix Development Release not recommended for normal use The netcam code is stil...

r3 - 29 Mar 2005 - 13:14 by MikeChudobiak

MotionRelease3x2x1snap10

Motion Snapshot Release 3.2.1_snap10 Release Notes 3.2.1 snap10 28 Mar 2005 Development Release not recommended for normal use The netcam code is still under...

NEW - 28 Mar 2005 - 01:12 by KennethLavrsen

MotionRelease3x2x1snap9

Motion Snapshot Release 3.2.1_snap9 Release Notes 3.2.1 snap9 27 Mar 2005 :scull: Don't use. Buggy. Development Release not recommended for normal use The n...

r3 - 27 Mar 2005 - 20:32 by AngelCarpintero

MotionRelease3x1x20snap2

Motion Snapshot Release 3.1.20_snap2 Release Notes 3.1.20 snap2 27 Mar 2005 :scull: Don't use. Buggy Bugfix Development Release not recommended for normal u...

r3 - 27 Mar 2005 - 19:19 by AngelCarpintero

TimBernersLee

Tim Berners Lee invented the World Wide Web while working at CERN in 1989. See his biography at http://www.w3.org/People/Berners Lee/

NEW - 27 Mar 2005 - 13:14 by TWikiContributor

MotionRelease3x2x1snap8

Motion Snapshot Release 3.2.1_snap8 Release Notes 3.2.1 snap8 26 Mar 2005 Development Release not recommended for normal use The netcam code is still under d...

r3 - 26 Mar 2005 - 16:57 by KennethLavrsen

MotionRelease3x1x20snap1

Motion Snapshot Release 3.1.20_snap1 Release Notes 3.1.20 snap1 26 Mar 2005 Bugfix Development Release not recommended for normal use The netcam code is stil...

NEW - 26 Mar 2005 - 01:15 by KennethLavrsen

SupportQuestion2005x03x24x141933

Question Hello I've got problem with Motion. I've got 3 netcameras Axion 2110. It breaks after few minutes. It looks like this: 1) For a first ~60 sec all is ok:...

r3 - 24 Mar 2005 - 23:33 by KennethLavrsen

MotionRelease3x2x1snap7

Motion Snapshot Release 3.2.1_snap7 Release Notes 3.2.1 snap7 24 Mar 2005 Development Release not recommended for normal use The netcam code is still under d...

NEW - 24 Mar 2005 - 07:19 by KennethLavrsen

SupportQuestion2005x03x22x113924

Question Hi, is it possible to use motion on a SBC W/128mb DiskOnModule? Right now, there is a debian(woody) system using about 4mb of DOM. There is no library i...

r2 - 22 Mar 2005 - 13:48 by KennethLavrsen

SupportQuestion2005x03x22x053049

Question Dear Kenneth. Sorry for bypassing the request procedure, seems complicated.. What is complicated about filling out a web form? It takes me a significant ...

NEW - 22 Mar 2005 - 05:55 by KennethLavrsen

MotionRelease3x2x1snap6

Motion Snapshot Release 3.2.1_snap6 Release Notes 3.2.1 snap6 20 Mar 2005 Development Release not recommended for normal use Note that in this snapshot suppo...

NEW - 20 Mar 2005 - 21:25 by KennethLavrsen

MotionAndVloopbackVideoDotCPatch

Motion And Vloopback video.c Patch Submitted by Main.KennethLavrsen on behalf of William M Brack Introduction This patch is supposed to work with the new version...

r4 - 18 Mar 2005 - 21:43 by KennethLavrsen

SetupModeDiscussion

setup_mode discussion The feature was discussed on IRC #motion channel. http://koala.ilog.fr/twikiirc/bin/irclogger_log/motion?date=2004 11 01,Mon sel=51#l47 Here...

r3 - 17 Mar 2005 - 21:34 by KennethLavrsen

MotionFrameBufferTechnique

Motion Frame Buffer Technique Kenneth needs a place to put this info while developing the code. And why not share it on TWIki. Not completed at all.. Variables u...

r4 - 16 Mar 2005 - 07:11 by KennethLavrsen

MotionRelease3x2x1snap5

Motion Snapshot Release 3.2.1_snap5 Release Notes 3.2.1 snap5 13 Mar 2005 Development Release not recommended for normal use Changes since 3.1.19_snap4 snap1...

NEW - 13 Mar 2005 - 16:37 by KennethLavrsen

MotionRelease3x2x1snap4

Motion Snapshot Release 3.2.1_snap4 Release Notes 3.2.1 snap4 11 Mar 2005 Development Release not recommended for normal use Changes since 3.1.19_snap4 snap1...

NEW - 11 Mar 2005 - 23:46 by KennethLavrsen

BugReport2005x01x31x211756

BUG: Someone kindly reported that Motion 3.1.18 fails to save timelapse mpegs when setting ffmpeg_timelapse = 1. Test case Set ffmpeg_timelapse = 1 and no mpeg ...

r2 - 10 Mar 2005 - 00:44 by KennethLavrsen

BugReport2005x01x16x030209

BUG: The streaming netcam feature used with a Panasonic KX HCM280 produces errors and terminates motion. Security is enabled on the camera. netcam_userpass motio...

r9 - 10 Mar 2005 - 00:43 by KennethLavrsen

BugReport2005x03x01x195957

BUG: I can't set a track/set with a value higher then 9 and a negative value. I use a Logitech Sphere with pwc version 10.0.6 /2/track/set?pan=20 tilt=20 also do...

r5 - 10 Mar 2005 - 00:41 by KennethLavrsen

BugReport2005x02x01x071546

BUG: When you start Motion and have a netcam even with single jpegs Motion often stops right away. Test case I have used your URL and I can for sure say tha...

r5 - 10 Mar 2005 - 00:39 by KennethLavrsen

SupportQuestion2005x02x20x154829

Question I am looking at using Motion. I was very excited when I first learned of the multiple camara (round robin) option. Unfortunately it won't work for me now...

r5 - 10 Mar 2005 - 00:27 by KennethLavrsen

SupportQuestion2005x03x09x180553

Question I am interested in incorporating sound in some way. If a sound is detected by an external microphone I want to activate Motion as if there was movement....

r2 - 10 Mar 2005 - 00:15 by KennethLavrsen

BugReport2005x01x10x202519

BUG: Calling motion with a netcam I get a segmentation fault. In the standard motion.conf I only put a ";" in front of the "videodevice" And "tunerdevice" and ad...

r10 - 07 Mar 2005 - 20:33 by KennethLavrsen

BugReport2005x03x03x232615

BUG: my configure was as follows: ./configure without pgsql However when I try to run motion, I get. motion: error while loading shared libraries: libpq.so.3: c...

r4 - 04 Mar 2005 - 17:32 by KennethLavrsen

BugReport2005x02x23x095334

BUG: Suse have not provided much in their personal CD not geven gcc! As a result motion will not compile once gcc and ffmpeg (either 0.4.8 or 0.4.9.1pre1) is i...

r5 - 03 Mar 2005 - 22:16 by KennethLavrsen

ReleaseNoteMotion3x1x19

Release Note Motion 3.1.19 3.1.19 Summary of changes since 3.1.18. * Fixed bug when setting ffmpeg_timelapse=1 * Made netcam code more robust * Fixe...

r2 - 02 Mar 2005 - 18:25 by KennethLavrsen

MotionRelease3x2x1snap3

Motion Snapshot Release 3.2.1_snap3 Release Notes 3.2.1 snap3 1 Mar 2005 Development Release not recommended for normal use Changes since 3.1.19_snap3 snap1 ...

r2 - 02 Mar 2005 - 00:38 by AngelCarpintero

BugReport2005x02x24x135548

BUG: To reduce the bandwidth consumed while monitoring my cam using motion's mini http server, I tried setting webcam_maxrate 0.1 in the config file. As soon as ...

r5 - 28 Feb 2005 - 15:40 by RaphaelAssenat

MotionRelease3x2x1snap2

Motion Snapshot Release 3.2.1_snap2 Release Notes 3.2.1 snap2 26 Feb 2005 Development Release not recommended for normal use Changes since 3.1.19_snap3 snap1...

NEW - 26 Feb 2005 - 09:35 by KennethLavrsen

MotionRelease3x2x1snap1

Motion Snapshot Release 3.2.1_snap1 Release Notes 3.2.1 snap1 16 Feb 2005 Development Release not recommended for normal use Changes since 3.1.19_snap3 snap1...

r7 - 26 Feb 2005 - 09:24 by KennethLavrsen

SupportQuestion2005x02x25x122038

Question Hi folks, I am looking for a Live CD that incorporates Motion? This is for a simple single webcam monitoring application. Does anyone have any experienc...

r2 - 26 Feb 2005 - 00:37 by KennethLavrsen

SupportQuestion2005x02x21x213030

Question Running motion 3.1.18 on FC3 HP TC2120 server with Hauppage WinTV Express card. Kernel is 2.6.10 1.766_FC3 #1 USB camera works just fine. However when ...

r7 - 26 Feb 2005 - 00:30 by KennethLavrsen

SupportQuestion2005x02x24x125815

Question I am trying to use motion for timelapse recordings to replace a timelapse VCR we have so we can file the videos on DVD. I would like to use Motion but th...

r4 - 26 Feb 2005 - 00:01 by KennethLavrsen

MotionRelease3x1x19snap4

Motion Snapshot Release 3.1.19_snap4 Release Notes 3.1.19 snap4 25 Feb 2005 Development Release not recommended for normal use Changes since 3.1.18 snap1 ...

r2 - 25 Feb 2005 - 22:17 by KennethLavrsen

BugReport2005x02x07x100303

BUG: i get this error during configure "configure: error: cannot compute sizeof (short int),77" it was reported in snap8 but the solution put ther (installing li...

r10 - 25 Feb 2005 - 19:43 by AngelCarpintero

BugReport2005x01x30x190907

BUG: Starting motion 3.1.18 it writes out Thread0 device: /dev/video0 input: 8 Illegal instruction and steps out. Test case EPIA 5000 mainboard, spca50x camera ...

r8 - 25 Feb 2005 - 19:42 by AngelCarpintero

MotionRelease3x1x19snap3

Motion Snapshot Release 3.1.19_snap3 Release Notes 3.1.19 snap3 16 Feb 2005 Development Release not recommended for normal use Changes since 3.1.18 snap1 ...

r3 - 17 Feb 2005 - 21:06 by AngelCarpintero

MotionRelease3x1x19snap2

Motion Snapshot Release 3.1.19_snap2 Release Notes 3.1.19 snap2 15 Feb 2005 Development Release not recommended for normal use Changes since 3.1.18 snap1 ...

r2 - 15 Feb 2005 - 14:51 by AngelCarpintero

SupportQuestion2005x02x14x143258

Question Hi there I want to truncate the motion detected video at say 5 seconds, then not produce any more video for say 2 minutes. I tried setting gap 120 ma...

r2 - 15 Feb 2005 - 07:24 by KennethLavrsen

BugReport2005x02x11x150802

BUG: Building an RPM from the makefile included with the source fails to use the DESTDIR environment variable. This results in modifications to the primary file...

r4 - 14 Feb 2005 - 05:22 by AngelCarpintero

MotionRelease3x1x19snap1

Motion Snapshot Release 3.1.19_snap1 Release Notes 3.1.19 snap1 09 Feb 2005 Development Release not recommended for normal use Changes since 3.1.18 snap1 ...

r4 - 14 Feb 2005 - 05:02 by AngelCarpintero

BugReport2005x02x11x170019

BUG: %makeinstall section of motion.spec (line 33) included with source attempts to mv motion dist.conf from %{_sysconfdir} directory to %{_sysconfdir}/%{name} d...

r4 - 14 Feb 2005 - 04:55 by AngelCarpintero

PreCaptureThrottleLoad

Feature Proposal Redesign pre_capture to throttle load when many frames have to be processed Feature proposal added by Main.JoergWeber 15 Sep 2004 Proposal 10...

r7 - 13 Feb 2005 - 16:09 by KennethLavrsen

BugReport2005x02x12x013830

BUG: i have a recording which stopped in the middle of motion. nothing in the messages file. but the sequence is clearly truncated. the config is set for 5 pr...

r3 - 13 Feb 2005 - 11:15 by KennethLavrsen

SupportQuestion2005x01x07x150123

Question motion coredumps on me everynight, it seems to run just fine all day long but dumps in the middle of the night. here are my logs: Jan 6 13:43:28 731CAM...

r4 - 12 Feb 2005 - 01:41 by AngelCarpintero

BugReport2004x10x25x084137

BUG: looks like this on FreeBSD 4.10 STABLE after motion has been running for ~32 hours = 77096 root /usr/local/bin/motion \ 77097 root /usr/local/bin...

r6 - 12 Feb 2005 - 01:34 by AngelCarpintero

SupportQuestion2005x02x04x091351

Question I have a capture card called GrandTek bt848 with 4 ports for 4 cammeras. I whanted to ask you how exactly cand i configure that all the 4 cameras conecte...

r2 - 04 Feb 2005 - 18:04 by KennethLavrsen

SupportQuestion2005x02x02x184321

Question This is a follow up question to SupportQuestion2005x01x28x222114 Thanks for your quick answer. Unfortunately this does not work for me. Computer: A 120MH...

r2 - 02 Feb 2005 - 21:43 by KennethLavrsen

SupportQuestion2005x02x02x070318

Question I m using Motion 3.1.17 with 3 D link DCS900 network cameras. It was working fine with 1 camera. Then I added two more and the problems started. Recordin...

r2 - 02 Feb 2005 - 07:48 by KennethLavrsen

RotatePatch

Updated Rotate Patch ( Speed Improvement ) Introduction The updated rotate patch was created for two reasons: 1. Possible bugs in the original rotate patch. ...

r21 - 30 Jan 2005 - 13:44 by KennethLavrsen

MakefileWithAutoDependencies

Makefile with Auto Dependencies Introduction Ok, so this isn't really a patch. It's a new Makefile.in that automatically calculates dependencies between source a...

r6 - 30 Jan 2005 - 13:43 by KennethLavrsen

LabelingSpeedPatch

Labeling Speed Improvement Patch Introduction This patch improves the speed of the alg_labeling function substantially. It also fixed a bug in said function. De...

r7 - 30 Jan 2005 - 13:43 by KennethLavrsen

DilateNineSpeedPatch

Dilate9 Speed Patch Introduction This patch was created to improve the speed of the dilate9 function in alg.c. As can be seen in the execution profile when motio...

r6 - 30 Jan 2005 - 13:42 by KennethLavrsen

DilateFiveSpeedPatch

Dilate5 Speed Patch Introduction This patch is similar to the DilateNineSpeedPatch, but improves the speed of the dilate5 function instead. As can be seen in the...

r3 - 30 Jan 2005 - 13:42 by KennethLavrsen

BrightnessContrastPatch

Patch Title Brightness, Contrast, Saturation, Hue Introduction This patch allows motion to set the brightness, contrast, saturation and hue for a video source. ...

r21 - 30 Jan 2005 - 13:41 by KennethLavrsen

BugReport2004x12x15x102245

BUG: Using last snapshot ( motion 3.1.18_snap8 ) with ffmpeg 0.4.8 compiled from source and with logitech Sphere ( pwc 10.0.5 ). modprobe pwc size=vga mbufs=3 ...

r3 - 30 Jan 2005 - 13:31 by KennethLavrsen

BugReport2005x01x05x174139

BUG: The end of output of motion h says Will read motion.conf from current directory, ~ and /opt/motion/motion 3.1.17/etc. Where "~" should apparently actually ...

r3 - 30 Jan 2005 - 13:31 by KennethLavrsen

BugReport2005x01x06x103939

BUG: Does that phrase in docs mean "enable only one of" or "don't confuse with"? Test case Environment Motion version: 3.1.17 Shared libraries: ...

r3 - 30 Jan 2005 - 13:30 by KennethLavrsen

BugReport2005x01x10x095715

BUG: The configuration is working with motion version 3.1.17 but the crash occurs in the version 3.1.18. The behaviour of motion is a little bit strange: if a se...

r10 - 30 Jan 2005 - 13:30 by KennethLavrsen

BugReport2005x01x13x131304

BUG: My Labtec (HDCS 1020) camera is mounted upside down. Using rotate 180 gives some sort of interleaved corruption of the image. I have to use an external scri...

r4 - 30 Jan 2005 - 13:29 by KennethLavrsen

BugReport2005x01x06x181426

BUG: When mencoder (of the Mplayer package) is encoding and the user presses ^C, mencoder completes the file gracefully and exits only then, thus leaving behind ...

r6 - 30 Jan 2005 - 13:29 by KennethLavrsen

BugReport2004x12x02x115356

BUG: This program runs well straight from the debian package with the given config file. However, when I add the command "rotate 180" in the config file, motion ...

r7 - 30 Jan 2005 - 13:29 by KennethLavrsen

BugReport2004x10x26x134906

BUG: When running motion as daemon, I am getting application bug warnings emitted from SYSLOG an Redhat AS 3. The error is as follows. Oct 26 08:43:43 localhost...

r5 - 30 Jan 2005 - 13:28 by KennethLavrsen

BugReport2005x01x23x133554

BUG: From IRC #Motion 23 Jan 2005 13:53 I am (happily!) using motion 3.1.17. the timelapse mpegs sometimes do not rotate at midnight each day, but keep going...

r3 - 30 Jan 2005 - 13:28 by KennethLavrsen

GNUPublicLicense

r2 - 30 Jan 2005 - 13:08 by KennethLavrsen

PhilipsWebcamDriverDebate

Philips Webcam Driver Debate Background Subjective and biosed statement from Kenneth Lavrsen as a starting point for debate. This text was originally on the info...

r4 - 30 Jan 2005 - 13:06 by KennethLavrsen

RemoteControlXmlRpc

Controlling Motion via XML RPC Motion version 3.1.12 has got a new exciting feature which is the ability to control Motion while it is running. Motion now has a b...

r5 - 30 Jan 2005 - 00:36 by KennethLavrsen

ReleaseNoteMotion3x1x17

Release Note Motion 3.1.17 3.1.17 Bugfix release snap1 * Removed annoying debug syslog message (input: #) * Implemented Peter Ilin's patch for handling v...

NEW - 29 Jan 2005 - 17:53 by KennethLavrsen

GenHtmlShellScript

genhtml.sh Author: Main.JeroenVreeken Submitted by. Main.KennethLavrsen Generates output similar to show.cgi but without the header. Depends on the chosen filenam...

r2 - 29 Jan 2005 - 15:45 by KennethLavrsen

PerlParseMJPEGStream

Perl Parse MJPEG Stream Introduction This project is just for posting Perl code snippets for parsing an MJPEG Stream in real time. Detailed Description I don't ...

r5 - 29 Jan 2005 - 15:45 by KennethLavrsen

SupportQuestion2005x01x28x222114

Question Thanks for motion! What I am after is something like this: just as lastsnap.jpg is the last picture taken, it would be very useful to have something like...

r2 - 28 Jan 2005 - 23:10 by KennethLavrsen

SupportQuestion2005x01x24x005849

Question First off, let me say thank you. Motion is an excellent product and you can bet I'll be telling my friends about it. Now on to the questions: Is there an...

r2 - 24 Jan 2005 - 07:54 by KennethLavrsen

SupportQuestion2005x01x06x201636

Question I want to run motion as apache, to be able to use webdav for collecting data from the storage directory. The only way I know, is before running motion to...

r3 - 18 Jan 2005 - 01:34 by KennethLavrsen

WebCam

Main.SebastienFricker 16 Jan 2005

NEW - 16 Jan 2005 - 09:55 by SebastienFricker

SupportQuestion2005x01x14x215833

Question My camera is mounted upside down, and I use rotate 180 to correct it. Is the mask image applied before or after the rotation? Environment Motion versi...

r2 - 15 Jan 2005 - 07:43 by KennethLavrsen

SupportQuestion2005x01x14x012409

Question Sorry for the dumb question, but I reccently upgraded from an old version to 3.1.18 snap 8, in the older version jpeg_cleanup worked with ffmpeg. The do...

r2 - 14 Jan 2005 - 21:14 by KennethLavrsen

RelatedProjectsTemplate

(Replace this text by a short headline for your project) Introduction Please introduce your project. What does it do? Detailed Description Give more details as...

r2 - 11 Jan 2005 - 22:08 by KennethLavrsen

BugStatus

Bug Status There are few status fields in the Motion bug reports to keep things simple. * New: New bugs, bugs not yet resolved are in this state * Assigned:...

r2 - 11 Jan 2005 - 21:49 by KennethLavrsen

BugReportForm

Form Definition Bug Reports Name:* *Type: Size: Values: Tooltip message: Atributes TopicTitle text 70 The title is shown in the tables ...

r4 - 11 Jan 2005 - 21:47 by KennethLavrsen

BugReport2005x01x06x123130

BUG: If I set the target_dir configuration variable to a value where there is no write permissions, motion simply exits with a "Thread exiting" message when it a...

r2 - 10 Jan 2005 - 02:16 by KennethLavrsen

NetcamDecompressInMemory

Netcam Decompress In Memory Introduction There're a fact that makes motion to decrease its performance, write to disk each frame captured from network cameras. T...

r6 - 03 Jan 2005 - 00:19 by KennethLavrsen

KennethsCustomKernelWithPWC10andK8000

Kenneth's step by step instructioncustom kernel with PWC 10.0.4 and K8000 I am writing this for my own use. But others may use it for inspiration. I am building m...

r5 - 02 Jan 2005 - 03:54 by KennethLavrsen

SupportQuestion2004x12x22x220225

Question I am using the webcam feature to stream live pictures. This works really well with one thread. However when I add a second thread the second camera works...

r2 - 23 Dec 2004 - 17:04 by KennethLavrsen

BugReport2004x11x20x092807

BUG: great job you´re doing here. respect! though i have problems w/ my installation. system: SUSE Linux 2.6.9 #3 Sun Nov 14 17:17:40 CET 2004 x86_64 x86_64 x86...

r5 - 20 Dec 2004 - 23:16 by KennethLavrsen

BugReport2004x10x24x140232

BUG: I have trouble capturing ffmpeg movie 640x480 @ 25fps. I have bt878 card (Hauppauge WinTV? Express), AMD 2000 processor and 512MB of memory. I'm using Linu...

r3 - 20 Dec 2004 - 23:15 by KennethLavrsen

BugReport2004x11x13x202132

BUG: My quickcam orbit didn't correctly move the camera towards a moving object. This seems to be caused by the fact that the y axis is inverted. The camera Y ax...

r3 - 20 Dec 2004 - 22:44 by KennethLavrsen

BugReport2004x12x14x082854

BUG: When compiling with ffmpeg support on a basic fedora core 3 system I end up with the following error: gcc I/usr/include/ffmpeg g O2 DHAVE_CURL DHAVE_F...

r3 - 20 Dec 2004 - 22:39 by KennethLavrsen

SupportQuestion2004x11x19x183818

Question I keep getting "sync error in proc : Input/output error" in /var/log/messages. Configuration: Fedora Core 2, vanilla. Using Avermedia EZ DVD PCI Card wi...

r3 - 20 Dec 2004 - 22:10 by KennethLavrsen

SupportQuestion2004x12x20x160810

Question I would like to add text into a picture from a file so that the text could change. For example: a temperature reading from a temp probe, a binary reading...

r2 - 20 Dec 2004 - 17:14 by KennethLavrsen

MotionCodeWebcam

Motion Code Webcam This topic is describes the code that makes up the Motion webcam feature. Not completed yet It is created so that one does not have to re i...

NEW - 19 Dec 2004 - 01:32 by KennethLavrsen

SupportQuestion2004x12x17x204538

Question I'd like to use the webcam server option of Motion to broadcast a stream (of jpgs) to the internet when a motion is detected (to safe server load). Howev...

r2 - 18 Dec 2004 - 00:53 by KennethLavrsen

SupportQuestion2004x12x11x050926

Question All I read on motion is about specific cameras. Our voluntary worker's organization got a deal on a wireless generic surveillance camera! Does it really ...

r2 - 14 Dec 2004 - 07:48 by KennethLavrsen

BugReport2004x11x20x173207

BUG: motion contrl info cause a crash of motion. This occurs in the version 3.1.18 snap 7 In the version 3.1.17 the problem did not occurs. In the version 3.1.17...

r2 - 13 Dec 2004 - 17:37 by KennethLavrsen

BugReport2004x11x20x174816

BUG: It s a little bit strange "motion control conf list" on the localhost but not on a remote host. the error produced is: XML RPC Fault: no element found ( 503...

r3 - 13 Dec 2004 - 17:37 by KennethLavrsen

EnhancedTrackingFeatureDiscussion

Enhanced Tracking Feature Discussion Proposed by Main.SebastienFricker Hi Kenneth, I had a discussion with Angel, and I think that this point is close on my side....

NEW - 03 Dec 2004 - 08:14 by KennethLavrsen

MotionWithFFmpegDiscussion

Motion with FFmpeg Introduction This topic was started to host a discussion of Motion's support for FFmpeg. FFmpeg is a solution for encoding and decoding video ...

r3 - 29 Nov 2004 - 16:56 by PerJonsson

MotionRelease3x1x18snap6

Motion Snapshot Release 3.1.18_snap6 Release Notes 3.1.18 snap6 12 Nov 2004 Development Release not recommended for normal use Released as snapshot for devel...

r2 - 15 Nov 2004 - 23:20 by AngelCarpintero

SupportQuestion2004x11x11x071138

Question I have installed the lates versions of the libwww Libraries from the URL www.w3c.org/Library and the File XMLRPC 0.9.10 kjl3.tar.gz. The apache 1.3.X Web...

r3 - 15 Nov 2004 - 20:16 by KennethLavrsen

MotionWatchdogAndCleanupPrograms

motionwatchdog and motioncleanup Introduction motionwatchdog: an application which (re)start motion and other application automatically after a crash. Option...

r2 - 15 Nov 2004 - 17:48 by KennethLavrsen

SupportQuestion2004x11x09x194756

Question (transferred from UserFeedback) Motion is great. I used Motion in version 2.6 to set up a simple surveillance box. But still a question: I want to run si...

r4 - 12 Nov 2004 - 21:36 by ThorstenKutska

MotionCenter

Main.AlexRodrigues 12 Nov 2004

NEW - 12 Nov 2004 - 03:08 by AlexRodrigues

MotionRelease3x1x18snap5

Motion Snapshot Release 3.1.18_snap5 Release Notes 3.1.18 snap5 11 Nov 2004 Development Release not recommended for normal use Released as snapshot for devel...

NEW - 11 Nov 2004 - 00:25 by KennethLavrsen

SingleFrameCaptureUsingPHP

Single Frame Capturing Using PHP Submitted by John Huong Introduction This PHP script is a port of the original MJ Grab program. Detailed Description To use th...

r5 - 04 Nov 2004 - 21:45 by KennethLavrsen

MotionRelease3x1x18snap4

Motion Snapshot Release 3.1.18_snap4 Release Notes 3.1.18 snap4 01 Nov 2004 Development Release not recommended for normal use Released as snapshot for devel...

NEW - 01 Nov 2004 - 01:37 by KennethLavrsen

BugReport2004x10x24x135840

BUG: Added by Kenneth Lavrsen on behalf of Main.MikeLees. I think I have spotted a minor bug with config file save if I set text_left to have leading spaces vi...

r2 - 01 Nov 2004 - 01:20 by KennethLavrsen

SupportQuestion2004x10x29x154401

Question This is more of a feature request, really. It seems like, unless you set the framerate to maximum, the videos, when played, look like they're beeing fast...

r2 - 30 Oct 2004 - 23:56 by KennethLavrsen

MotionRelease3x1x18snap3

Motion Snapshot Release 3.1.18_snap3 Release Notes 3.1.18 snap3 Development Release not recommended for normal use Released as snapshot for developers to merge...

r2 - 29 Oct 2004 - 15:44 by AngelCarpintero

MotionRelease3x1x18snap2

Motion Snapshot Release 3.1.18_snap2 Release Notes 3.1.18 snap2 Development Release not recommended for normal use Released as snapshot for developers to merge...

r2 - 26 Oct 2004 - 14:21 by AngelCarpintero

SubmittedBy

Submitted By Name of the person that submits the original topic (submit question, bug report etc). If you have a TWiki name use this in the format Main.KennethLav...

NEW - 24 Oct 2004 - 13:05 by KennethLavrsen

SupportForm

Form Definition Support Questions Name:* *Type: Size: Values: Tooltip message: TopicTitle text 70 The title is shown in the tables Suppor...

r3 - 24 Oct 2004 - 13:02 by KennethLavrsen

MotionStreamTestProgram

Motion Stream Test Program Introduction Test the webcam stream from Motion. Detailed Description This program connects to the webcam stream of Motion and output...

NEW - 23 Oct 2004 - 21:47 by KennethLavrsen

SupportStatus

Support questions have this status: * AskedQuestions: See the new questions that have not yet been answered * AssignedQuestions: Under investigation by the ...

r2 - 22 Oct 2004 - 06:40 by KennethLavrsen

MotionRelease3x1x18snap1

Motion Snapshot Release 3.1.18_snap1 Release Notes 3.1.18 snap1 Development Release not recommended for normal use Released as snapshot for developers to merge...

r2 - 19 Oct 2004 - 21:48 by AngelCarpintero

SyslogEventPatch

Syslog Event Patch Introduction This patch addresses the issue that Motion starts processes that never ends Patch was submitted by Mike Lees on the Motion Mailin...

r6 - 17 Oct 2004 - 22:10 by AngelCarpintero

HowToPatchPWC9PWCX9OnKernel2dot6

How To Patch pwc 9.0.x / pwcx 9.0 on Kernel 2.6.7 (and probably later) The following how to was originally posted on the Motion Mailing List. Note that there is n...

NEW - 15 Oct 2004 - 06:08 by KennethLavrsen

FreeBSDFixCompile

FreeBSD Fix Compile Problem description When you try to compile FreeBSD version of motion without bktr support ( V4L in linux ) passing without v4l to configur...

r9 - 14 Oct 2004 - 22:51 by KennethLavrsen

DaemonDetachFromSTDIO

Motion should detach from standard in and standard out when going daemon Introduction From IRC channel #motion 1 oct 2004 23:09 fd 0 is still attached in daem...

r4 - 14 Oct 2004 - 22:50 by KennethLavrsen

MotionRelease3x1x17snap2

Motion Snapshot Release 3.1.17_snap2 Release Notes NOTE: Official 3.1.17 is now released 3.1.17 snap2 Bugfix release * Implemented a new lightswitch feature....

r6 - 14 Oct 2004 - 22:33 by KennethLavrsen

MotionExamples

Examples * Image file saved by using the output_normal option (colour USB camera) * Image file saved by using the output_motion option. The picture shows...

r3 - 12 Oct 2004 - 07:33 by KennethLavrsen

MotionViewJavaUtility

Motion View Author: Jay Summit (http://www.summet.com/mainhome.html) Submitted by: Main.KennethLavrsen Motion View is a utility program written in Java that allow...

r2 - 12 Oct 2004 - 01:05 by KennethLavrsen

LinuxVideoSurveillanceELViS

Linux Video Surveillance eLViS Linux Video Surveillance AKA eLViS provides a user interface for watching motion frames captured by the motion program as JPEG f...

NEW - 12 Oct 2004 - 00:55 by KennethLavrsen

MeasureNoise

Measurenoise Author: Folkert van Heusden Upload here by: Main.KennethLavrsen Original URL for project: http://www.vanheusden.com/measurenoise/ Check the original ...

NEW - 12 Oct 2004 - 00:45 by KennethLavrsen

MotionCGI

Motion.cgi Introduction Motion.cgi is a set of scripts intended to give a user remote (or local) access to motion through any webbrowser. Detailed Description M...

NEW - 12 Oct 2004 - 00:10 by KennethLavrsen

MotionTrackerAPI

Serial stepper motor interface API *Subject: API for controlling a serial stepper motor *Version: 1.0 *Status: final *Author: Jeroen Vreeken *Date: 14 6 2001 Int...

NEW - 11 Oct 2004 - 00:06 by KennethLavrsen

MotionTracking

Motion Tracking Author: Jeroen Vreeken Tracking A while ago I and several others made a serial port controlled stepper motor system. I also added the capability ...

NEW - 10 Oct 2004 - 23:54 by KennethLavrsen

Number of topics: 500

< Previous Page 4 of 5 Next >

See also:

RSS feed, recent changes with 50, 100, 200, 500, 1000 topics, all changes

Topic revision: r2 - 27 Oct 2010, KennethLavrsen

Motion

Welcome

Motion Web
Motion Home

Copyright © 1999-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Please do not email Kenneth for support questions (read why). Use the Support Requests page or join the Mailing List.
This website only use harmless session cookies. See Cookie Policy for details. By using this website you accept the use of these cookies.